Related
Hi All,
I am meddling with my ext rom. I am setting it to auto install s/w upon hard reset. it works fine. I found out that when i hard reset the pda and phone volume is set to half. How do i make it to full ? Also, i would like to know
how do i move some files to some other folders. eg: ringtones, etc.
One option is to use the CAB Wizard and create a Small CAB File with your settings for Registry - Cab wizard allows you to put files into specific folders etc and all this you can do without writing ONE SINGLE LINE OF Script.
Another option is to do it via script :
In the config.txt you can add the lines :
CPY1:\Extended_ROM\CabInstall.exe
CPY2:\Windows\Start Menu\Programs\CabInstall.exe
Means the Cabinstall.exe will be copied from the extended_Rom to the Programs folder in Windows\Start Menu.
The Registry keys you can check out on the link :
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
If they are not there - PM me and I shall send them to you...
Rgs/DD
thanks! I downloaded the PHM Reg editor and followed the instructions under Microsoft Application Installer -> Changing the setting so that it asks you where to install a cab on the link above..
It worked.. my ipaq now ask me where to install the cab files!
brilliant... thanks again!
Hello,
can anyone tell me if there a good instruction somewhere about producing an executable .reg file for the WM5 platform (Qtek 9000 PPC as well as Qtek 8300 Smartphone) ?
It should contain modifications to the registry which should be applied upon exectuting this file.
(With thge help of a second such file I'd like to reset the initial reg values back.)
Thanks in advance.
well
just look inside a .reg file with notepad.
example:
[HKEY_CLASSES_ROOT]
[HKEY_CLASSES_ROOT\.2bp]
"Content Type"="image/bmp"
"Default"="bmpimage"
"PerceivedType"="image"
[HKEY_CLASSES_ROOT\.3gp]
"Default"="3gpfile"
that's it...
im sure u understood what should be done...
To make it executable you need to write a custom app or import the reg settings into a cab and load the cab.
V
How do i make a .reg file delete a value in the registry ??
I think you insert a - before the key
I'll have to google to confirm, but I'm cooking right now
V
vijay555 said:
To make it executable you need to write a custom app or import the reg settings into a cab and load the cab.
V
Click to expand...
Click to collapse
Thanks to all !
Yes, just this would be my prime question:
Is there any documentation on how to make it executable by "transforming it into a cab file" ?
Guys, I was just asked how to prepare a cab file containing registry settings, to save you having to configure your registry manually each hard reset.
Anyway, the process is (relatively) easy!
Purists and coders would generally do this by writing your own installer cab. For this route, follow this thread and engage brain to OverDrive!
http://www.pocketpcdn.com/articles/setupdll.html
However, the easiest way is to grab a copy of WinCE cab manager.
Install that app. Find any existing cab that you've used to install an app before. Load it into CabMan. Using the interface, remove all existing files and registry settings etc. Set your own Cab name, company name etc in the settings.
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Save each exported tree as eg 1.reg, 2. reg, etc.
Then, copy them onto your pc, open each file in notepad and copy and paste the contents of each into 1 large file, eg RegCompiled.reg. (You don't need to do this step, but for your own reference you may want them all in one place)
Then, import that into CabMan. Now, it may not work - I think you need to have a valid reg file, which is basicaly the same thing you've already got, but with a first line header saying:
"Windows Registry Editor Version 5.00"
No speech marks.
Grab this line for yourself by exporting something from your pc's registry using RegEdit, then load into notepad and grab the first line.
Ok, CabMan should now show the number of imported registry entries on the tree on the left.
That's it! Save, and then run on your PDA.
Try a test run first before relying on it for life and death!
V
vijay555 said:
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Click to expand...
Click to collapse
I'm using for this purpose two regeditors - both freeware:
PHM registry editor [Philippe Majerus] v0.70 - for its search feature
TRE registry editor [TascalSoft] v0.90 - for import/export and ability to edit MULTI_SZ values.
There is one great utility: SSnap
Run SSnap before and after installation and compare files. Use any diff program or [my choose, but comercial] UltraEdit
baniaczek: thanks for the alternatives.
PHM is very good, but unfortunately at least in the previous versions, the export wasn't very helpful.
A good reg editor is a fairly essential tool, so use what you get on best with!
V
I have a question, is there anyway to make it so that the cab will also delete a registry key on the phone? any help would be appreciated. thanks.
vijay555 said:
Guys, I was just asked how to prepare a cab file containing registry settings, to save you having to configure your registry manually each hard reset.
Anyway, the process is (relatively) easy!
Purists and coders would generally do this by writing your own installer cab. For this route, follow this thread and engage brain to OverDrive!
http://www.pocketpcdn.com/articles/setupdll.html
However, the easiest way is to grab a copy of WinCE cab manager.
Install that app. Find any existing cab that you've used to install an app before. Load it into CabMan. Using the interface, remove all existing files and registry settings etc. Set your own Cab name, company name etc in the settings.
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Save each exported tree as eg 1.reg, 2. reg, etc.
Then, copy them onto your pc, open each file in notepad and copy and paste the contents of each into 1 large file, eg RegCompiled.reg. (You don't need to do this step, but for your own reference you may want them all in one place)
Then, import that into CabMan. Now, it may not work - I think you need to have a valid reg file, which is basicaly the same thing you've already got, but with a first line header saying:
"Windows Registry Editor Version 5.00"
No speech marks.
Grab this line for yourself by exporting something from your pc's registry using RegEdit, then load into notepad and grab the first line.
Ok, CabMan should now show the number of imported registry entries on the tree on the left.
That's it! Save, and then run on your PDA.
Try a test run first before relying on it for life and death!
V
Click to expand...
Click to collapse
4 reg hacks u can also use my way and i think it is a lot faster
http://forum.xda-developers.com/showthread.php?t=547339
btw i cannot upload the ppt file 2 xda (dont know way it is only 3m) if someone can it will be great
tnx
The WinCE CAB Manager is the ultimate utility for developers of applications designed for the Windows CE operating system. But it's not freeware!
You might build the CAB online: http://www.supware.net/CabGen/
Hello,
I'd like to introduce new registry editor CeRegEditor for WindowsCE, WindowsMobile
It works on desktop PC but operates on PDA's registry.
Main features:
- keys/values create and edit
- fast search
- export/import keys to/from REG file
- create "image" registry with compare and restore service
- free for private and commercial use
- registry compare to CAB or REG files
- open REG/RGU, CAB, HV as regular registry, with all edit functions available
...and many more
link to web site: http://ceregeditor.mdsoft.pl?lang=en
link to software: http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
It is still during test period, but basic features are well tested and stable
It is Polish software but with english interface
edit
If You find any error in the application or mistake in English interface please send an email to [email protected] or write it within thread
nice one! thanks!
It looks very nice! thanks
Hi!
Thanks a lot! The compare service makes it even easier to build OEM packages when kooking ROMs. Great software!
Regards,
PK
nice app.
good tool, many of cookers want to edit the registries using the PC
Nice software I have one suggestion: since this works on the desktop, one feature that would be neet was that if we install a CAB, it detects what's changed on the PPC, regarding the registry. That would be great to know what are the registry keys needed for the instalation of OEM packages!
dferreira said:
Nice software .... if we install a CAB, it detects what's changed on the PPC, regarding the registry. That would be great to know what are the registry keys needed for the instalation of OEM packages!
Click to expand...
Click to collapse
You can use compare tool embedded into CeRegEditor.
First, create registry image(Images->Create image or F2 key) and after cab instalation perform compare registry, Images->Compare registry. It will show only differences/changes between the image and the current registry
I hope this will be useful for You
Great Work
Great work, sounds cool...thanks !
Yes, very thanks so much!
NIce Progie thanx
New version 0.0.2.2
+ added UNICODE support for export/import data to/from REG file
+ fixed header in REG file. The string in header changed to REGEDIT4. Previous string was not compatible with some other registry tools (WinCE Cab Manager)
+ fixed format of path to directory/file in REG file.
...and some minor fixes
Thank you, I was using Mobile Registry Editor to edit registry directly from Desktop but your app look nice
New version 0.0.3.0 available
Some fixes and new features!
Now, compare tool handles CAB and REG files
So, it is possible to compare registry to CAB file or REG file, CAB to CAB, CAB to REG, REG to registry image, etc.
It's possible to check what changes will be made by CAB before CAB instalation
Update details: http://ceregeditor.mdsoft.pl/index.php?id=4&lang=en
Download: http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
cool... I will check this out soon.
@mdziedzic, curious how you are implementig the cab compare function... are you just looking at reg entries stored in the cab? Cos sometimes the complicated ones involve self-registering dlls and setup.dll files that make reg entries also. Prime examples of this are voice command, mark all as read, and some SPB apps. For those we always have to do a reg diff before/after cab install to see what the setup.dll did (or see the self-registered dll additions).
I have been wondering if it's possible to write an app that examines a setup.dll to see what reg entries it would create. So far I don't know of any way to do that other than reg dump->install cab->reg dump->compare.
Anyway your app will be very useful! Thanks for your hard work.
congratz.
widzisz? docenią....
luv2chill said:
@mdziedzic, curious how you are implementig the cab compare function... are you just looking at reg entries stored in the cab? {...cut...}
Click to expand...
Click to collapse
Yes, I compare only reg entries stored in cab!
luv2chill said:
I have been wondering if it's possible to write an app that examines a setup.dll to see what reg entries it would create.
Click to expand...
Click to collapse
I think it is not possible! Each developer/provider creates it's individual setup.dll for CABs. Each DLL could has different structure (written in C++ or Pascal). Trying to "decode" setup.dll will be always "guessig"!
luv2chill said:
So far I don't know of any way to do that other than reg dump->install cab->reg dump->compare.
Click to expand...
Click to collapse
IMO, for CABs with setup.dll or exe instalators it's the best metod. In CeRegEditor, just create registry image (F2)-> do instalations-> compare registry with image(F3). After compare You can save differences to REG file
luv2chill said:
Anyway your app will be very useful! Thanks for your hard work.
Click to expand...
Click to collapse
Great
New version 0.0.3.1 available
http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
Updates:
- fix in CAB-> REG conversion
great looking ap...
I particularly like the little status monitor...nice touch.
It would be great if you could also map registry files from a dumped rom. This way you could easily extract registry settings from other phones without the need of the actual device. At this moment you still need the phone.
is this possible
Does anybody has Resco Explorer in ext package?
Tried to do it but i miss resco registry and resco ftp.
Thanks!!
What exactly do you want to get? I have it (selfmade).... But it's free for sure....
One more thing - I use OEM regular structure - not EXT (For OsBuilder). It's a normal package - with rgu and dsm.... Registry is a separate cab - you should add it to the package. FTP is a part of explorer - just added features.
AndrewSh said:
What exactly do you want to get? I have it (selfmade).... But it's free for sure....
One more thing - I use OEM regular structure - not EXT (For OsBuilder). It's a normal package - with rgu and dsm.... Registry is a separate cab - you should add it to the package. FTP is a part of explorer - just added features.
Click to expand...
Click to collapse
Well, in Resco site there is one cab for all the subprograms that are included in the resco 2010 8.10 version.
It is this cab I tried to convert to ext package.Everyrhing works except registry function.
Thanks anyway.
Attached is the app.reg (renamed to app.txt because of forums limitations) file that I use for Resco Explorer with FTP and Registry plugins added.
I didn't clean it up so it also contains the keys and values for the options and settings that I prefer having.
For future reference, I had the same issue as you at first then I used a tool called Kheb to monitor the registry changes that happen when I install cabs and customize everything. Kheb can also make diffs between different registry snapshots and even generate OEM packages based on such diffs.
I did apply your REG file, but Resco Registry not work yet, the problem is a SETUP.DLL in to the Resco Explorer CAB, it contains a secret instructions and I believe that is impossible to open it, anyway I saw some cooks with Resco Explorer and Registry in their ROMs, it's obvious that they know the secret.
I also want to know.....pleaseeeee
justintxu said:
I did apply your REG file, but Resco Registry not work yet, the problem is a SETUP.DLL in to the Resco Explorer CAB, it contains a secret instructions and I believe that is impossible to open it, anyway I saw some cooks with Resco Explorer and Registry in their ROMs, it's obvious that they know the secret.
I also want to know.....pleaseeeee
Click to expand...
Click to collapse
Make the package with cab to package software (there is in all kitchens) and then replace the reg and app.dat files with the ones attached and cook it.Works for me.
The idea goes to MusicMonk but his attached file doesnt work for me.
Just use Kheb like MusikMonk suggested; it will capture all of the reg keys that are installed by the setup.dll. You can also look in the setup.dll with notepad and probably see the keys that are installed.
If you're trying to backup you registration info, it's stored in a file in \windows called wmtrigger.dat. All of Resco's registration codes are stored in that file, so if you have several of their apps, that's all you need.
NIKOSXRI said:
Make the package with cab to package software (there is in all kitchens) and then replace the reg and app.dat files with the ones attached and cook it.Works for me.
The idea goes to MusicMonk but his attached file doesnt work for me.
Click to expand...
Click to collapse
I did apply your REG file but not works for me, anyway thanks for your help, mate.
I made a CAB file from the original Resco Explorer CAB, I deleted all files except SETUP.DLL and later run it and VOILA!!! the Resco Registry works !!!!!
Unfortunately I don't need it, I need the secret instructions in SETUP.DLL, I did open it using UltraEdit but I can't find nothing.
try this it should work, but your still gonna need the code as this is not cracked
Thank you, mate, but I found the secret reg keys in the setup.dll file. I used CeRegEditor to create a registry image, later install the cab with setup.dll and I created a image again, and finally I compared the first and second image to detect the differences.
I made a new reg and all works now
Thank you very much mates
fully working resco explorer package
Fixed some shortcuts added rtoday plugin, resco update, task manager that was missing and ftp in previous packages and is attached below.
Of course it needs the usual registration process.
NIKOSXRI said:
Fixed some shortcuts added rtoday plugin, resco update, task manager that was missing and ftp in previous packages and is attached below.
Of course it needs the usual registration process.
Click to expand...
Click to collapse
Have you managed to have in built registration code in it so that you dont have to feed the registration key after the installation?
c_shekhar said:
Have you managed to have in built registration code in it so that you dont have to feed the registration key after the installation?
Click to expand...
Click to collapse
The registration code is in the wmtrigger.dat file in windows folder which is created after registration.
So you have to copy this folder after registration and put it in your kitchen.
NIKOSXRI said:
The registration code is in the wmtrigger.dat file in windows folder which is created after registration.
So you have to copy this folder after registration and put it in your kitchen.
Click to expand...
Click to collapse
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?
c_shekhar said:
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?
Click to expand...
Click to collapse
All Resco products write registration to one file It's well known for ages and it's no need to discover anything. So if you decide to use several resco products - you should install and register them all and then save the summary wmtrigger.dat - it will be one for all installed Resco-s..... And for sure - system User name should be the same for all your roms - it's also fixed in that file...
One more tip: if you occasionally decide to use cracked resco products - you will get a conflict if you use for example one legal and one cracked program simultaneously in one rom. So better use all registered.
AndrewSh said:
All Resco products write registration to one file It's well known for ages and it's no need to discover anything. So if you decide to use several resco products - you should install and register them all and then save the summary wmtrigger.dat - it will be one for all installed Resco-s..... And for sure - system User name should be the same for all your roms - it's also fixed in that file...
One more tip: if you occasionally decide to use cracked resco products - you will get a conflict if you use for example one legal and one cracked program simultaneously in one rom. So better use all registered.
Click to expand...
Click to collapse
Thanks a lot. Added to my knowledge bank..
c_shekhar said:
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?
Click to expand...
Click to collapse
You can use sktracker in your phone.
This program traces the changes in registry and files so if you create a snapshot with the program and then install or register applications or change the options and user settings in applications (you better do it program by program) you can easily find the changes and apply them each time you change your rom.
I apply all mods with sashimi but there are other choices also.
NIKOSXRI said:
You can use sktracker in your phone.
This program traces the changes in registry and files so if you create a snapshot with the program and then install or register applications or change the options and user settings in applications (you better do it program by program) you can easily find the changes and apply them each time you change your rom.
I apply all mods with sashimi but there are other choices also.
Click to expand...
Click to collapse
I used to find the registry part of any cab or software by saving the registry and comparing the one before and after with the help of registry workshop on my PC, but did not know that there exists a utility with which wmtrakker.dat"" type of new file creation can also be found out.
Thanks a lot bro!!!
It's very good
Does anyone know how to backup Resco Customizations ( e.g ToollBar Shortcuts etc ? )