when I downgrade my radio in WM5 do I have to hard reset or can I continue like normal but just with a older version of the radio?
just do a soft reset to get out of the message screen & don't forget to readjust your date & time!
Related
Hi
If I just upgrade my 1.03 Radio ROM to 1.04, and not the CE ROM or Ext ROM, does my device still hard reset.
Thanks
Given to update the device it needs to go into bootloader mode the answer is yes.
On a magician you follow the same process as a full-upgrade => hard-reset.
M
Since then voila I install a rom for the first time I have a bug here is a picture to help you understand
It is an image that I have requests in the forum but am in all its images
More information please!
We need more information!
Are you using SPL or USPL?
What ROM did you flash?
Did you perform a hard reset after flashing the ROM?
If you're not sure about the above then read this for SPL:
http://forum.xda-developers.com/showthread.php?t=431217
This for USPL:
http://forum.xda-developers.com/showthread.php?t=462347
And this is an all round overview:
http://forum.xda-developers.com/showthread.php?t=505377
G
Edit: And this post makes me a senior member - woohoo!
Here is how I do I install rom always full of the same problem
Olinex I install 1.56 and then the official 1.56 rom 2009
The picture you supply isn't from the official 1.56 HTC ROM because it is running Windows mobile 6.5 (I can tell from the user interface). The official ROM uses Windows Mobile 6.1.
I think you need to make sure that you flashed the correct ROM and then flash the device again. After doing this make sure you hard reset afterwards at least once, preferably twice by holding down both volume buttons while powering the device on.
Also unless you have a CID locked phone that is branded eg. Orange, you shouldn't have to use Olinex HSPL and can download the official ROM from here:
http://www.htc.com/uk/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
In any case you should confirm which SPL you have by holding down the lower volume button while booting (it will tell you either SPL or HSPL along with version number).
Let us know how you get on...
G
HSPL 156 OliNex and htc is a factory not orange or other
Okay, it sounds like you have successfully installed HSPL, but now you need to try flashing the ROM again (it appears to be the ROM that is causing the graphic corruption in your picture).
Make sure you perform two hard resets after flashing and hopefully this should solve your problem...
Cheers,
G
P.S. Make sure you back everything up prior to re-flashing as you will lose everything in phone memory (SD card should not be affected, but my advise would be to remove it anyway until you have re-flashed).
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.
I've been reading on the upgrade to 6.1 with various cooked rom, and decided to go with Tessa 4.5. Since it is required to go with IPL 3.10/SPL 3.10, i went from original ROM and upgrade one step at a time, to 1.17, 2.26 and 2.28, and 3.10 (both IPL and SPL). Then I noticed after 3.10, i cannot boot up. This is before I upgrade to Tessa, just upgrading IPL/SPL.
When in 2.26, everytime upgrade completed, reboot went fine. But after 3.10, it went wrong. I tried to fix it with upgrading IPL only to 3.14.
It still wont boot up after power down.
So I downgrade to IPL/SPL 2.28. The SPL went down, but IPL stays at 3.14, and the problem continues. I can upgrade to Onyx, but everytime I power down, i have to flash with IPL/SPL 2.28 to make the ELF boot up. When I get to the OS, i check my battery is 0%.
Is IPL 3.14 the culprit? If yes, how do I downgrade it? using elf-uspl and/or Rom Utility gives same result: IPL stays at 3.14.
Help?
Update:
i was able to flash with elf-uspl using ipl/spl 2.27/2.28.
Now i have onyx junior with the ipl/spl combination above.
But it is still having problem when I turned off the device. It won't go pass smart mobility, instead it just shut down again. I have to take out the battery, put it back in, then reflash with rom utility (with any spl/ipl below 3.0) then it would restart and go pass smart mobility and enter the OS.
What gives?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 coked rom that would accept these IPL/SPL setting...
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 cooked rom that would accept these IPL/SPL setting...
Hi guyz,
I flashed the Leon ROM in the morning. After the flash the phone was stuck on the HTC logo. After a soft reset it loaded up and everything worked perfectly. I really liked the LEON ROM so I kept it and started syncing all the stuff from my PC.. I was playing with it a few hours.
I added some albums to my SD card and was updating the music player when it crashed and reset itself.
I can't get past the HTC screen again. I tried everything, soft reset, with and without the SD card, without SIM, taking out the battery but it's stuck.
Can you guyz tell me what it is or of any of u had the same and how u sorted it out?
If nothing helps what can I do? Can I still flash the official ROM or should I re-flash LEON?
Hope it can be sorted without exchanging it or repair.
Thanks very much
Suz
----------------------
SPL 1.42 HardSPL by bepe and Cotulla
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.4 WWE
ROM Date: 02/19/10
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
samsamuel said:
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
Click to expand...
Click to collapse
1. Yes
2. No (just 2)
3. I am on in rite now.
Can I just flash a new ROM over it? Should work rite?
Yep, sure, boot to bootloader, wait for 'serial' to become 'usb' and run customruu.exe to flash.
Thanks very much for your help..
xxx
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to: http://forum.xda-developers.com/showthread.php?t=611787
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe (download here: http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 )
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
wtfbbq said:
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to:
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
Click to expand...
Click to collapse
Damn it! I wish I read this sooner.. I tried to flash the updated version of LEON 1.5 but nothing changed.. Now I'm flashing the original ROM 1.48.
I will run task 29 afterwards and try LEON 1.5 again. If it ain't working after that I will try the radio thingy .. Have to look up the radio stuff coz I'm still confused.. ehm..
Thanks so much for your help.. I appreciate it..
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
SinFire said:
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
Click to expand...
Click to collapse
i dont mean to sound pedantic but it LEO
djchubbs said:
i dont mean to sound pedantic but it LEO
Click to expand...
Click to collapse
nah.. it doesn't sound pedantic.. LOL.. LEON as in the ROM LEON.. not the phone... heh
wtfbbq said:
....(make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
Click to expand...
Click to collapse
The name is so of no importance! i can even call fu**er.nbh if i want to, Custom_RUU will still update it. As long as both files are in the same folder nothing else matters. If you don't believe me, then just go ahead and try it yourself