is it possible for the call answer/end buttonson the side to light up wen i get a call when the exec is closed
i forget which is the end and answer button wen its dark
please can sum1 help me
thanks in advance
raj
Raj,
Unfortunately this is a known issue in Universal, and we hope that they will fix it in the first ROM Up-grade.
I'm afraid there is no way to make it light for the time being.
Regards,
Related
May I ask a very stupid question? How to answer an incoming call?
Problem: when I got a new call, the mobile keeps reminding me as normal but neither the answer botton nor the menu could pick the call up!
I swear the botton and menu function well and it has no other obvious faluty!
Actually I have similar? Was putting it down to sliding it out of the case causing the hng up button to be pressed.
Yeah, I also have a similar problem,
mostly the close to end and the end key itself doesn't work, i always have to press the en button on the screen.
This also happens to the answer button sometimes:S:S
I got this problem when i flashed from the Swedish rom to the Niki Project V1 ROM. Flashing back to the HTC WWE Asia rom fixed the problem. I use WWE HTC Asia because its available with the new touch.dll as it seems like Niki Project V2 doesnt have it cooked in. But Niki Project V2 doesnt seem to hang on calls, its just slower when you touch the screen.
Now I worked out a very complicated way to answer the call:
1 slide it out, to open the phone menu
2 touch the keypad
3 press green answer botten
It's the only way I could answer my call! So great! Thank you fu**ing design!
Hi,
I had a problem with my Jade where the LCD screen blackout while making a call out, and i need to turn the screen on again pressing the power button.
Can anyone advise me?
Thank you in advance for your advise.
Vincent
No problem, is a normal function
Yup, that's normal behavior. There is a sensor which senses when you have the phone touching your face. It then turns the screen off. You wouldn't want it to activate all kinds of options while rubbing your face.
Thanks a lot! but Garmin problem now..
Hi ralfbonne, Arunia,
Thanks alot for your advise.
I have another problem which is the Garmin Mobile XT 5.00.10W.
Is a cracked version, after i installed S2U2 v1.60, the below error message pops up while half way using the Garmin GPS:
"Read access violation at data address 0xF9C3D650. Program address 0x0016FAF4 in background thread NULL (GfxFieldWindowProc)".
Is this caused by the settings for S2U2?
Besides, sometimes it took too long time to get the satellites signals, can be up to 20mins long!
Could you please kindly advise me too?
Thanks in advance.
Have a nice day.
Vincent
How to keep screen on in call (no blackout): solution
All registry hacks & Advanced Config tricks for keeping the screen on while a call is in progress do not apply to the Jade/3G.
However, there is a solution to overcome this annoying feature:
install Touch InCall Screen Tweak, and set the options "Ignore first screen off" and "Always On" in the options.
Why keep the screen on during call? Your face will just start activating things at random. If you really need it on (maybe using earpiece) you can always press the power button.
It's annoying
I have never accidently pressed anything on the screen while calling.
However, having to press the power button to bring the screen back while calling voicemail has annoyed me many times.
I also believe it is annoying that the screen blacks out. Even when I have the phone facing down and not to my ear, the screen blacks
I need to get it on, so I could use speakerphone. I'm one of those that love using speakerphone, so yea
I will try the InCall cab file.
I am not sure if anybody else has had this problem. But when you dial a number on jade the screen goes off after connection, but suppose you need to dial other numbers ( Customer service calls). You have to press the on/off button on top.
Otherwise sometimes your hear clicks other buttons accidentally. Is there anyway for the phone to lock the screen and dialpad after connection. Its really annoying that the keypad clicks by mistake or users have to carefully turn off the screen.
The iphone detects that the speaker is covered and automatically switches off the screen so there is no accidental dialing. Wish jade had something similar.
What do the others do??
Follow this discussion and you will have some idea
http://forum.xda-developers.com/showthread.php?t=460377&highlight=screen
Thanks so much!! So no great solutions...I dont think i have any sensors on my jade. HTC really needs to think about this, I make lots of customer service calls and pretty much have to use the on/off button on top all the time to be careful to not dial/press random buttons with my ear.
I wish somebody could create something...or htc would think out of the box and make this a serious concern.
countdrakc said:
Thanks so much!! So no great solutions...I dont think i have any sensors on my jade. (...)
Click to expand...
Click to collapse
I think so too. No sensor-function noticeable.
I noticed this problem:
when i start a call, my screen become black and i cannot hang-up the call.
anyone with same problem?
another little question:
i have a time-limited data plan (40H /month) is there a way to know if my HD2/WP7 phone is connected or not? or a way to control my data connection?
thank you!
I have the same issue. If I hold the proximity sensor directly to a bright light source the screen comes back on but I'm not always near a bright light source. I've been making calls on my bluetooth headset because that has a hardware hang-up button. If someone could work out how to hook up the hd2 hang-up button this would be a massive help...
EDIT: i make some test, plese discard this post (test result in post #5)
I'm not sure about yours, but after I finish my call I just remove my phone from my ear then the screen show up . Regardless where I am (dim or bright place) the screen responds to the movement of the phone away from my ear .
ok, i make some other test.
confirmed, we have some problem with proximity sensors.
when i make a call, the screen become black. immediately, witoutn anything else.
wen i remove the phone from my ear the screen will NOT come up UNLESS the other part hang up.
for example: if the other part use an answering machine, i am able to record my message, but the screen DOES NOT comes up when i remove it from my ear.
if the other part is a friend, and HE hang up the call, my screens lights up, again, sayng "call ended". then return to the home screen.
if i'm in-call, and i expose the phone to a bright light, the screen comes back too, sowhing all in-call options (speaker activation keypad, and some other things)
Just press the normal hang up button and that should act as the power button to bring the screen back on...
B4PJS said:
Just press the normal hang up button and that should act as the power button to bring the screen back on...
Click to expand...
Click to collapse
during call this button doesn't do nothing.... already try with all button..
i just play with registry entries, some are interesting.
HKLM\Drivers\Builtin\Proximity
ScreenOffDebounceTime DWORD:50 (Decimal value)
ScreenOffThreshold DWORD:256 (Decimal value)
But i cannot figure how they affect screen (i try to change their value with no effect)
update:
seems i fix it!!!
after an UPGRADE (hehehe) to winMo 6.5, i realize that problem still exist.
then i remove a portion of the screen protextor and proximity sensors works again!
even if i use original HTC screen protector... :\
nushuth said:
update:
seems i fix it!!!
after an UPGRADE (hehehe) to winMo 6.5, i realize that problem still exist.
then i remove a portion of the screen protextor and proximity sensors works again!
even if i use original HTC screen protector... :\
Click to expand...
Click to collapse
I've tried that already but it didn't work for me. I did have my screen replaced so I wonder if the problem started then...
Same to me... Is this a replaced screen issue?
Strange one this...the red button (bottom right of the 5 physical buttons) just brings the screen to life for me and should work I would have thought regardless if screen is replaced.
hey guys i am facing a problem too with my tmous hd2...i have dual booted it..when i make a call in android or win7 proximity sensor doesnt turn off the screen at all.....so i end calls without my knowledge and intent.....anyone facing similar issues??? anybody knows any solution???
Hey all,
I have an issue with all custom roms that are not based on Samsung software that when I make a call my screen turns off because of the proximity sensor but the touch screen remains active.. Like I can press the back key the settings key and then press anywhere on the screen and it will load applications etc.. I this is very annoying cuz my face can do stuff that I don't want to.. Is this only with me or does anyone else have the same issue?
I have the i9500
Thanks in advance
Amir
guess its only you mate, its actually quite useful to keep touch responsiveness on during a phone call, you can still use ur phone during a call for whatever reason.. just dont keep your phone THAT close to ur face and u'll be good