My friend has a o2 exec with test version...
Can't find a way to hard reset the unit...
Is the same way like holding the power button and reset hole?
We did itfew times but just can't hard reset...
Any solution to this?
parkertseng said:
My friend has a o2 exec with test version...
Can't find a way to hard reset the unit...
Is the same way like holding the power button and reset hole?
We did itfew times but just can't hard reset...
Any solution to this?
Click to expand...
Click to collapse
You need to press the 2 "-" keys on the top of the keyboard and in the same time do a soft resset !
Also try-- 'Clear Storage' in Programs (PIN is 4321)
Lets say its crashing on boot. What is the key combination to hard reset it?
Hold the comm manager buton and the voice command button at the same time.
While holding these push the soft reset button. Keep your fingers on the Comm and voice Manager buton. After about five seconds a screen will appear asking you to press the green send button.
That's it.
Hold the comm manager buton and the voice command button at the same time.
While holding these push the soft reset button. Keep your fingers on the Comm and voice Manager buton. After about five seconds a screen will appear asking you to press the green send button.
That's it.
My wizard froze on reset after i installed pocketplus 3 - has to use the hard reset method mentioned above, works a treat.
Paul
mine froze to after pocketplus 3.. verry wierd
pocketplus3
q-biq said:
mine froze to after pocketplus 3.. verry wierd
Click to expand...
Click to collapse
Disable "safe mode" function before soft reset.
Yes mine froze to after pocketplus 3.0.0.3888 too but not with 3.0.0.3652
How do you disable "safe mode" function before soft reset. ? :idea:
Thanks
go into "setting" and then icon Spb Pocket Plus, and bottem feature on menu is safe mode, un-tick it.
Ah ok thanks :wink:
other way for hard reset
press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen
DocteurN said:
Yes mine froze to after pocketplus 3.0.0.3888 too but not with 3.0.0.3652
How do you disable "safe mode" function before soft reset. ? :idea:
Thanks
Click to expand...
Click to collapse
Get PPlus 3.0.4, works very good.
Re: other way for hard reset
mouradhabib said:
press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen
Click to expand...
Click to collapse
Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).
I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...
Just my 2 cents...
Ciao
Hold the buttons, and press reset for a short time. Still hold the buttons, and press talk when asked.
ok heart attack over.
:lol:
Re: other way for hard reset
mix said:
mouradhabib said:
press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen
Click to expand...
Click to collapse
Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).
I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...
Click to expand...
Click to collapse
I have the same problem. I disabled PocketPlus Safe Mode...but still cannot do a hard reset. Where is the utility that you mentioned? I cannot find it on my device.
Re: other way for hard reset
topps said:
mix said:
mouradhabib said:
press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen
Click to expand...
Click to collapse
Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).
I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...
Click to expand...
Click to collapse
I have the same problem. I disabled PocketPlus Safe Mode...but still cannot do a hard reset. Where is the utility that you mentioned? I cannot find it on my device.
Click to expand...
Click to collapse
Ah, found it. Start | Settings | System | Clear Memory... thanks.
This forum rocks
Passed closley to heart attack after crash on boot.
Thanks
VJEschaton will hard reset a wizard...
V
For newbies like me i push up again this thread.
Again, there are two methods available to perform a hard reset of your HTC Wizard. The first method is the easiest, but seems to be the least known method:
* Open the Start menu
* Select Settings
* Select the tab System
* Select Clear Storage
* You will now be prompted with a warning about the consequences of a hard reset, and will be asked to copy a word into a form and to confirm by pressing the left Soft Button
The first method is only availalbe when your HTC Wizard is functioning correctly. If that is not the case, a second method using only hardware buttons is available:
* Press and hold both the Comm Mannager Button and the Voice Command Button
* While keeping those two buttons pressed, press the Reset Button with your stylus
* After about a second you will be prompted for confirmation. Press the Talk Button to confirm
This method is tested and works on Qtek 9100, I-mate K-JAM, MDA Vario, Orange SPV M3000, O2 XDA Mini S, Dopod 838, Cingular 8125.
[fond this around the net]
bye
Diego
Thanks a lot man
Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)
Silly question...... i know
Could someone tell me how to do a hard reset please.
Cant find it in the search.
I dont have the destructions for my mini s im afraid.
I pressed the 2 top buttons on keyboard and pressed stylus in hole, but that only does a soft reset.I thought this was the way to do it.......Obviously not!
Cheers
Go to settings clear storage, it will ask you to press 1234 and yes. It should only take a min or two.
hold comm manager + voice comm insert stylus into hole [do not release 2 buttons]... wait a few seconds then a message will appear asking you to press the send button, once you press send it will perform a hard reset.
cheers guys
Hi,
Please give me a hand...
I can read text messages' headline only, but I can't read the contents.
Whenever I touch any headline, which shows blank.
Actually it's empty (white screen without format).
And IE was happening as the same case also.
Sigh...
I recently installed a trial version software as a cleaner for release more memories.
I deleted some files and let main memory of 13% free,
but I'm feeling so bewilder that I have making a quite mistake.
I couldn't read webpages on ie and couldn't read any text messages on mailbox,
after I deleted "some lnk files", "the whole directory of GPRS MONITOR
in My Device\Program Files\" on my O2 Atom.
Could any one help me to solve my problem, please? :?
You have to try to reset your device.
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.
Last option : Reflash yor ROM.
Re: You have to try to reset your device.
Experimenter said:
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.Last option : Reflash yor ROM.
Click to expand...
Click to collapse
:wink: Thanks for your kind reply.
I've already tried soft reset it for many times before I post this message. :?
:roll: I made the hard reset at last....
You're right, at least I can recover my Atom.