Jasjar is said having wi-fi
ok
and it is said having WEP encription. this says i-mate site specifications
but where?
in the setting wireless page i can find just LEAP page and there is no place to insert the long WEP key!!!
wireless without security is useless and LEAP system is just used on cisco routers
any ideas? :idea:
it asks for a wep key upon discovery. popped in me wep key and im on fine.
Carnivor said:
it asks for a wep key upon discovery. popped in me wep key and im on fine.
Click to expand...
Click to collapse
THANKS A LOT carnivor!!!
i was loosing my mind
i should have figured it out
Related
Hi all !
As far as i can understand there is no WPA support on Universal.
Did anybody hear about the plans or is there any third-party software that provides WPA functionality on Universal ?
Regards.
Orange SPV M5000 flashed with JASJAR_WWE_11353_137_10402.
Baudy.
huh?
currently supported is WPA-PSK, WPA-TKIP and WPA-WEP...
If you meant WPA2 with AES: I dont know.
I had asked (much) the same question before buying my O2 EXEC and found the answer here
http://certifications.wi-fi.org/wbcs_certified_products.php?TID=2
Select High Tech Computer Corp (HTC) and Submit and you'll see the Exec listed as (if I remember correctly) PU10. It claims to have
WPA™ - Personal
WPA™ - Enterprise
EAP-TLS
Mike
c0rnholio said:
huh?
currently supported is WPA-PSK, WPA-TKIP and WPA-WEP...
If you meant WPA2 with AES: I dont know.
Click to expand...
Click to collapse
How to achieve it ? I can see ONLY LEAP in my wireless config.
Can you help ? Did you try ?
can anyone help with this issue?
I am not sure as to how to proceed (and my obvious insufficient knowledge of wireless networks is not helping...).
I am currently using WEP, so my educated guess is that if I set WPA on my router I will be automatically prompted to sign-in with my WPA encrypted password.
Can I have confirmation of this; and also - do I need to enable/disable any setting on my xdaExec before I attempt to connect my device using WPA.
I use WPA-TKIP
I use WPA-TKIP with my JasJar. Not sure exactly how I set it up, but can't remember that I struggeled with it.
Believe I just setup WPA on 3Com router and when JasJar connected I was aksed to enter the code/passkey, and then it worked. ...possible I did some changes on JasJar setup also...?
Actually I had some more problems due to that I also use MAC filthering on the router, and if I added my JasJar's MAC AFTER setting up WPA, it did not work, and I had to remove from JasJar and reconnect again, type passkey, and then it worked. ...but if you don't use MAC filthering, this will not be an issue.
If you struggle with it, I can remove and add it again when I get home, and note down the steps.
Thanks mrGydar :!:
I appreciate your effort.
Before you re-configure your setup - I'll attempt to alter my setup to WPA and see how it goes. If it doesn't work out within a day - I'll let you know!
OK
Just for info, settings on my JasJar is right now in settings for my homenetwork:
Authentications: WPA-PSK
Data Encryption: Passkey
Best of luck, and if U struggle, let me know, and I'll write down the steps.
baudy2 said:
...As far as i can understand there is no WPA support on Universal....
Click to expand...
Click to collapse
Don't speak too loudly. I don't want my o2 Exc to discover it's been doing something it shouldn't for the last 6-weeks. :lol:
However, I have my Exec configured for my own and four different client's networks using WPA-PSK, TKIP and MAC-filtering, so it definately *does* work. I have the habit of presetting the connection settings since my key is 27-alphanumeric characters and it's a pain typing that in blind.
There is something strange depending upon which way you go about the configuration. On a few occasions, I've clicked the Authentication dropdown arrow to find only Open or Shared options listed - no WPA or WPA-PSK in sight. I've then turned the wireless off/on, sometimes reset, or just gone back into the configuration screen a different way and the options were back again.
It's usually happened when I've been rebuilding the system after an enforced hard reset, so I've never been in the mood to track the problem further - too busy trying not to smash the damn thing against the wall! :evil:
correct me if I am wrong, but wasn't WPA security for 802.11g and up.
This model supports 802.11b only so it will not do WPA.
afaik this would mean WEP is the only option.
JaySea said:
correct me if I am wrong, but wasn't WPA security for 802.11g and up.
This model supports 802.11b only so it will not do WPA.
afaik this would mean WEP is the only option.
Click to expand...
Click to collapse
Don't think so. I have a couple of clients with laptops only capable of 11b and they connect at 11b to multi-speed wireless/ADSL-routers using WPA-PSK without problems. Probably depends upon the age of the router device's firm- and hard-ware. Think one of my earlier ZyXEL models had only WEP when it arrived, but then a firmware update added WPA.
People
I am happy to say - I have just checked it out and it works :!: :!:
Earlier I reconfigured my router from WEP to WPA, and a few minutes ago I switched the wifi-ON, on my Exec - it just located my home network and asked for it's WPA catchphrase (password);
I didn't have to configure anything else. Just to be certain I used the internet explorer to surf a bit - and it did so with no problems whatsoever!
JaySea said:
correct me if I am wrong, but wasn't WPA security for 802.11g and up.
This model supports 802.11b only so it will not do WPA.
afaik this would mean WEP is the only option.
Click to expand...
Click to collapse
I must admit I had trouble finding out where you configure the wireless adapter in the Universal... But there's no worry because WPA and everything else can be configured here...!
Firstly ensure that the wireless adapter is switched on in the Wireless Manager... FN + -> key,
Once this has done, the wireless adpater will scan for networks in range. At this point some users will be prompted for the WPA key as mentioned in previous posts (this didn't work for me).
However, if you go to Start... Settings... Connections... Network Cards now, there will be a Configure Wireless Networks tab (wireless tab)... Here you can click Add New to enter the Network Name, and specify the WPA key via the "Network Key" tab.
Hope this helps some new users of the Universal!
Hi!
I have a linksys WRT54G3G wireless router and has set it for WPA encryption on the wireless network. But my HTC TyTN (Hermes) wont connect to it.
If I just say yes on the connection dialog, choose internet and the punch in the WPA key the device hangs and I have to soft reset.
If I create a wireless setting for my network on before hand and then turn radio on my device only says connecting. But never connects to my network.
WEP works fine on the device. And my laptop connects without any problem to both the WEP and WPA encrypted networks.
Does anyone have an idea what's wrong and how I can fix it?
Best regards,
\\ aste
aste said:
Hi!
I have a linksys WRT54G3G wireless router and has set it for WPA encryption on the wireless network. But my HTC TyTN (Hermes) wont connect to it.
If I just say yes on the connection dialog, choose internet and the punch in the WPA key the device hangs and I have to soft reset.
If I create a wireless setting for my network on before hand and then turn radio on my device only says connecting. But never connects to my network.
WEP works fine on the device. And my laptop connects without any problem to both the WEP and WPA encrypted networks.
Does anyone have an idea what's wrong and how I can fix it?
Best regards,
\\ aste
Click to expand...
Click to collapse
Don't know if these will help and you may have seen them already
http://forum.xda-developers.com/showthread.php?t=281297&highlight=linksys
particularly last post
http://forum.xda-developers.com/showthread.php?p=1029279&highlight=linksys#post1029279
Mike
It's working for me...
HTC TyTN with Linksys WAP-54G.
I use WPA-PSK with TKIP. All is working.
I've just selected such a parameters in setup window in my TyTN, set the key and all started to work perfect.
Hi mikechannon!
Thanks for the threads! I haven't seen them, but unfortunealy they don't help much. I have MAC filters turned on. But I don't have the same router. May be that's the problem. I'll try contacting linksys support next week. My device works fine with WEP encryption. But I'd like to secure my network a little bit more...
\\ a
aste said:
Hi mikechannon!
Thanks for the threads! I haven't seen them, but unfortunealy they don't help much. I have MAC filters turned on. But I don't have the same router. May be that's the problem. I'll try contacting linksys support next week. My device works fine with WEP encryption. But I'd like to secure my network a little bit more...
\\ a
Click to expand...
Click to collapse
Hope it works out.
Mike
hi,
I have had the same problem with my WRT54GS, and solved by choosing WEP security, but now after seeing this thread and following links I installed recent firmware from Linksys and... pronto! WPA / TKIP works smoothly. Thanks, folx.
mnez said:
hi,
I have had the same problem with my WRT54GS, and solved by choosing WEP security, but now after seeing this thread and following links I installed recent firmware from Linksys and... pronto! WPA / TKIP works smoothly. Thanks, folx.
Click to expand...
Click to collapse
Great, I was hoping that link to linksys would help www.linksys.com,
Mike
OK US Robotics MAXG router. All set up, laptops etc working fine. I got the mini s and the xda2i working on it too.
Then i went and stuck the security on it
WPA2 and WPA (PSK)
TKIP and AES
entered all the correct stuff on the computers and working ok.
with both the XDA's it says trying to connect but wont.
I ve looked in the distruction books for both 2i and mini s but they just say you might need to enter some password!!!
so mini s and xda 2i settings are
general tab
network name 'xxxxxxxxx'
connects to 'the internet'
network key tab
authentication 'wpa-psk'
data encryption 'tkip'
network key 'correct entry for my sys'
key index 'greyed out'
802.1x tab
nothing changeable but set to
use ieee 802.1x net access control
eap type 'smart card or cert
they both sit there saying my network is available but wont connect.
anyideas whats going on??
Network Prob
I recall a similiar problem some time ago and as far as I can remember I solved it by changing the encryption to WEP. It's worth a try.
Cheers.
Phil C
cheers.... dont want to go to WEP as its crackable in under 5mins by a novice now!!
Seems a bit silly that the XDA's have the apparent ability to do this encription but then won't work.
Pete
Is WEP really that hackable??
heres the info i found on it.
http://blogs.zdnet.com/Ou/index.php?p=42
http://blogs.zdnet.com/Ou/index.php?p=43
http://www.lanarchitect.net/Articles/Wireless/SecurityRating/
worth a read.
I'm using the exact same router with the same wireless security config. While other clients can connect to the router using WPA or WPA2 with TKIP or AES encryption, my TyTN simply refuses to connect.
After some intensive trial/error, I figured out the problem to be the TyTN itself, which simply can't get associated with the router when both TKIP and AES is selected on the router. Changing the WPA encryption to TKIP only while keeping both WPA and WPA2 authentication on the MAXg router solved the problem (no need to use the less secure WEP encryption).
Hope this helps.
HT
cheers, i have been playing with my settings too. I found that i had to change to WPA and TKIP only to get he Mini s to connect but hte 2i still wont The only thing i really use the connection at home for is to transfer files if im on the laptop rather than having to go to my main puter and plugging it all in. Its a pain as i tend to use the PDA's at work for stuff. Ill just have to get off my ass n go up stairs and do it now. Its a pain and it should work but im learning that these things aint all they should be
ConnorP said:
Is WEP really that hackable??
Click to expand...
Click to collapse
You bet it is, Try backtrack 2.0 is self booting linux build for "testing network security"
I have recently changed my routers encryption from WEP to WPA-PSK
I have gone into the settings on my VarioII and changed the key, it finds the router tries to connect but fails, I have re-entered the code several times but still it won't connect, it is a pain because you have to enter the code manually (it's 63 characters long) I managed to do it on my PS3 first time
Blobstrom said:
I have recently changed my routers encryption from WEP to WPA-PSK
I have gone into the settings on my VarioII and changed the key, it finds the router tries to connect but fails, I have re-entered the code several times but still it won't connect, it is a pain because you have to enter the code manually (it's 63 characters long) I managed to do it on my PS3 first time
Click to expand...
Click to collapse
Not going to solve your problem, but if you use something like Hitchhiker then at least it allows you to cut and paste the key.
There are lots of threads on WPA-PSK often Router specific - However without knowing your router here is a listing:
http://www.google.com/search?as_q=WPA-PSK+hermes&hl=en&num=10&btnG=Google+Search&as_epq=&as_oq=&as_eq=&lr=&as_ft=i&as_filetype=&as_qdr=all&as_nlo=&as_nhi=&as_occt=any&as_dt=i&as_sitesearch=http%3A%2F%2Fforum.xda-developers.com&as_rights=&safe=images
Mike
Thanks for your quick response, my router is a BT Voyager 2100. I'll see if there's any firmware updates for it
Ok fixed it.
Switch off the router and remove the connection on your network card and soft reset, restart the router, when it finds the connection put in your details, all is fine again.
Phew
Blobstrom said:
Ok fixed it.
Switch off the router and remove the connection on your network card and soft reset, restart the router, when it finds the connection put in your details, all is fine again.
Phew
Click to expand...
Click to collapse
Good news!
Mike
Upgrade to Windows Mobile 6
I flashed my TyTN to the latest radio and Windows Mobile 6 (using the black one now, but the XDA .2 worked as well).
Pre WM6 I had no WiFi love on my WPA encrypted link, but afterwards it works just fine. I had the same symptoms as you described, finds the SSID, enter password, no worky.
Need some help from the kind forumers here.
I have problem with my X1's Wifi.
I can connect to my wireless network which uses WEP encryption. However, I am not able to surt the net with Internet Explorer or with Opera Browser.
When I try to connect to other unsecured networks, that network's status changes from "Available" to "Connecting". However, it would then change to "Unavailable".
Is the Wifi faulty?
Thanks in advance.
sounds like you have the wrong WEP key on your phone. Try to remove any security from your router first and try again. If this works it shows that the wifi is working. You then will want to think about adding more security. WEP is pretty crap these days, so think about WPA instead (unless you have to use WEP).
artesea said:
sounds like you have the wrong WEP key on your phone. Try to remove any security from your router first and try again. If this works it shows that the wifi is working. You then will want to think about adding more security. WEP is pretty crap these days, so think about WPA instead (unless you have to use WEP).
Click to expand...
Click to collapse
Thanks for the reply. But I also can't log onto networks without security. Strange...
WIFI cannot connect to my wireless network anymore...?
I used to have my wifi working like 3 days ago. I need help in setting up my X1 and PC to work with my wireless router at home.
can anyone who is a smart guy help me with this problem?
thanks in advance!
uberman