Hi,
recenly I have a problem, when I turn on the phone in my 2020 the led puts ok, and the dktoday aplication says me that I have signal. But in the indicator up near the clock never puts the signals bars, and always it´s whit (!).
And when I introduce the pin, afther a seconds it´s doing me a Soft Reset.
What can I do?
Thanks.
Related
On my K-Jam when coming out of flight mode after a flight the signal strength meter shows no signal but I'm in a strong signal area and I can make and receive call fine. Switching the device off and on restores the signal meter.
Anybody else seeing this?
do you have anything installed that displays stuff on the top bars? maybe it's just a re-draw problem. if it doesn't affect performance then maybe it is ok?
No nothing installed which uses the top bar.
So, am I the only one with this problem? I am trying to stablish whether this is a WM% issue or due to something I have installed on my device.
anything that affects the radios then [i.e. stuff that turn on or off the BT/Telephone/WiFi]???
Only PPCProfilespro. I can try removing that I guess. will let you know.
i had a similar problem with older PPC phone. It would not turn the phone part back up, if my battery is low. Plug it in to a charger and it's back to normal.
Same problem here with an 8125 - need to reboot after using flight mode to get phone connected again. Means turning off and then soft booting vs flight mode is the best way to get on/off a plane. Annoying - the RIM guys are up and running instantly.
I've also seen this on my kjam a few times.
It doesn't show any signal bars but the green led flashes which indicates that there is a signal and i can make calls or send msgs!
Either a soft reset restores it back or by turnin Flight Mode on and off again..
how do u put the 8125 into flight mode
Well I uninstalled my PPCProfile Pro and it still does it. I then tried with another profiler (Phone alarms) and same thing. I think this is as MS software problem by the looks of it.
After flight mode it recovers... eventually
One of the things I've found is that if, after leaving flight mode, you just leave the phone for a while (at least 5-10 minutes) it eventually seems to show the signal strength properly.
Of course, that's a pain, so I usually just soft reset it.
When you say that it's showing the "..." and you can still make calls, do you know if GPRS also works? And, what about incoming calls?
Thanks!
sorry a bit offtopic: i can't find the thread with the GSM Test Mode (Reg-Hack, calling a phone-number...). Anybody has a link please?
Hy
thanks to all for this release.
here is my little problem,
i shut down the phone with the comm manager, and then , when i wont to swich it on, the phone doesn't switch on and the icon on comm manager is always the phone with the x.
So i have to soft reset and then the phone is on.
Is there any solution, please?
Thanks
Bye
Paolo
i waiting the solution too.
i have the same problem as well. Any guru out there that can help?
WM6 on BlueAngel there is no phone service
The SIM Card and phone operated ok when using WM 2003SE. The current radio version is 1.12.00
Me too
I haver radio 1.15.00 it also happen to me as well
Me too. Phone don't switching on from comm manager
I have the same problem, and the only solution I've found is make a soft reset. Anybody knows another method to turn it on again?
Thanks
I have the same problem but i just do a soft reset
for some reason the phone switches off and on but it is slow, sometimes i have to wait 5 minutes to switch on, also i have not such problem with newer version of comm manager (or i think i do not have this issue, i keep my phone always on)
xplode said:
for some reason the phone switches off and on but it is slow, sometimes i have to wait 5 minutes to switch on,
Click to expand...
Click to collapse
That's absolutely true, but in my case this "waiting period" is about 10 minutes. I have temporary solution-before going to sleep a make Soft Reset and tap cancel when SIM is detected...when I wake up I just turn it on...In this case I conserve power(the green LED still works when turn off phone through Comm Manager).
my phone does not connect to att or the internet. it looks and looks for signal but it will never work unless i plug my phone onto my computer and sync it through activesync. after leaving it plugged in my phone will find signal and i can unplug the phone and work it regularly. this is a problem cause if i turn my phone off its done.. i wont be able to get it working after i turn it back on unless i stop at home and fix it which is a pain when I travel and have to turn my phone off before a flight.
when i turn on the phone it will say i am missing the file " and i will not work properly.. etc..etc i dunno if that has anything to do with my problem
Try a Soft reset or Hard Reset,hope it'll work.
Cheers!
neither worked
the330ballers said:
neither worked
Click to expand...
Click to collapse
hmmmm,
You'll perhaps have to reflash it again,download official stock rom of your provider from its website and flash.ok
cheers!
anything??
well i have the nbd touchflo or whatever installed on mine and i have hard reset it a couple times.. reinstalled the software as well. usually when there are no programs it turns on and finds the signal. even when i do install programs it will work maybe the next 2 or 3 times i turn it off or soft reset it. then after that.. it never finds signal after turning on it needs a computer. this is really a hassle for traveling or if the battery drops out. sometimes it might even just lose signal for no reason. maybe im not doing something right.. is there a setting that needs to be changed once the phone screws up and doesnt find signal?
is it possible that if too many things are runnning it will not be able to find signal. right after turning it on i used the taskmanager to shut off ilock and s2u2 and then it shortly finds signal afterwards. sometimes it does att and sometimes it finds cingular. if it finds cingular the phone does not work and it says that the phone is off even though in the comm manager it is on. i just reset it and try again..
and whats the diff between the G (gprs) and E (medianet edge)? the phone never really works when it is doing G and when it tries to find signal when turning on the phone, sometimes (couple seconds) it will show some signal (calls still cant be made) with the G logo then eventually lose it.
Hi,
got anyone of you iGate working on the X1i?
After I have installed the app, it somehow breaks the password setting screen and I am no longer able to set some minute-value for locking. The locking time is always reset to 0 and therefore the idle screen no longer appears.
Any hints?
Is there another idle screen app, that shows at least clock, battery status und missed calls on the idle screen?
Thanks for any help.
Best,
jp
Has no one tried iGate
Today I reset my phone and only installed iGate. Nothing else. Turns out to be the same issue.
Is there any other app that shows phones, time, battery when the phone is locked?
thanx!
Hello friends,
My GPS stopped working after couple of month when i have a phone, factory restore fix problem for small amount of time, when i start GPS Test shows some sattelites, but if i restart a phone it shows 0of them. Strange thing i saw when i factory reset my phone and turn GPS in left top corner show location and satelite symbols, but after reboot, there's nothing. Maby its something with location gps starting services?