Related
Hi Guys,
My O2 BlueTooth Clip just arrived; I unpacked it and whacked it into the charger for a few hours till the light went Blue.
I enabled BT on my XDA II, turned on the headset and went in to bond to it.
No such luck... it just keeps saying no devices found etc etc.
I've tried switching from "on" in BT Setting to "discoverable", neither work.
Also tried ticking the Authentication Passkey box in BT Settings, no change.
The Clip, just flashed a nice purple for a couple of minutes ( as the manual says it will ), and beeps three times every 10-20 seconds, then turns off.
Anyone out there tell me what I'm doing wrong please?
Cheers
WikedBlade
hey mate,
not sure how the bluetooth headset you're using looks like but the problem might be the same when bonding with the jabra. for this headset, i believe it has to be turned off first before bonding can happen. what happens is i turn on the discoverable mode of the xda and then i have to press on the headset power button and continue pressing for at least 5 more seconds. when the light becomes solid blue that's the time the xda can find the headset. then bonding occurs...works for me...and unless i'm doing something different then anyone's free to correct me anytime
hope that helps
robson
Hiya,
I tried that; unfortunately it did not seem to work.
I placed the XDA II on discoverable, and had the BT Clip switched off, then I went into Bond device and started a search.
I then held down the BT Clip's button for 2 seconds to turn it on.
It came on, and a few seconds after that, the XDA II concluded it's search and came back with nothing found.
Thanks for the info, I will hold out and see if anyone else has other ideas.
By the way, the BT Clip is the official O2 headset, so if you want to see what it looks like you can just check under accessories in the myxda site.
Cheers
WikedBlade
No worries man,
For the FIRST time bonding, just press the on-off button for a much longer period, 8 seconds, then it will be discovered.
When I just bought it this afternoon, I tried that for a long time and can't bond it the same way just like you. Because we thought that only requires 2 seconds. Actually, it's not. Read the instruction carefully for the FIRST time bonding. You need 8 seconds pressing the button.
Hope this help.
Hiya Chris,
You are a champion.
Thank you so very much mate, it worked straight away.
Have a great weekend.
WikedBlade
You are welcome.
Indeed, anyone knows the way to use this headset for listening MP3?
Is it possible?
Thanks.
Hehe,
I was about to ask the exact same thing.
When you play a song or something in media player, it won't send it to the BT Clip Headset; not sure if it can!?
Anyone know for sure?
Cheers
WikedBlade
Hehe,
I was about to ask the exact same thing.
When you play a song or something in media player, it won't send it to the BT Clip Headset; not sure if it can!?
Anyone know for sure?
Cheers
WikedBlade
Hehe,
I was about to ask the exact same thing.
When you play a song or something in media player, it won't send it to the BT Clip Headset; not sure if it can!?
Anyone know for sure?
Cheers
WikedBlade
Can anyone tell me the default passkey for the o2 bluetooth clip headset?
anyone know anything about this?
any software?
thanks.
phm regedit.
I forgot the link, search with google.
Download the .cab file and put on you PPC. Tap on it and everything is going well.
Best regards,
Arto
maybe i didn't make my self clear.
i have a problem with SPEAKER PHONE.
i can bearly hear it! the same volume as regular earphone!
i was wondering how can i fix it?
Yes,
The quality of speaker phone on O2 XDA II mini is not as good as my old Nokia handphone.
But, you can try to edit the registry with PHM Regedit. It does help in sound quality (but not perfect). I forgot which registry need to edit. But you can find on this forum threat.
Make sure you also set the speaker phone mode (press phone button, green one, for 2 seconds).
Make sure the volume is high enought.
Hope can help.
Best regards,
Arto
thanks for your help, But i couldnt find the Tweak needed in the registry....
i need help, i press the green button twice, it says "Speakerphone on"
But: it is very very weak...
can anyone help?
i'm sure i'm not the only one with this problem.
Hello,
I was looking for same thing as the speaker volume is very low, please if any body know what registry value will control the speaker volume it would realy be great.
Thanx.
Artosoft said:
Yes,
The quality of speaker phone on O2 XDA II mini is not as good as my old Nokia handphone.
But, you can try to edit the registry with PHM Regedit. It does help in sound quality (but not perfect). I forgot which registry need to edit. But you can find on this forum threat.
Make sure you also set the speaker phone mode (press phone button, green one, for 2 seconds).
Make sure the volume is high enought.
Hope can help.
Best regards,
Arto
Click to expand...
Click to collapse
Dude what are you talking about. Nothing you have said makes any sense. The only know registry edit for audio is the one related to the normal earpiece - not the speakerphone. And that one is not reallt any use either.
The bad speakerphone on the JAM is known problem. And there is no soultion so far.
Try this link:
http://forum.xda-developers.com/viewtopic.php?t=17311
There is a threat about what I do on my O2 XDA II mini. It sound good on my mini for talking like normal handphone.
For Speakerphone, I give up. It is not loud.
Best regards,
Arto
assasins said:
i'm sure i'm not the only one with this problem.
Click to expand...
Click to collapse
The good news is that you're not the only one indeed - I have the same problem. The speakerphone mode is exactly as loud as the normal mode. The bad news is that I also do not have a simple solution.
In another forum, several people reported the same problem after they upgraded to the Radio Stack 1.05 and restored their previously backed-up data. A hard reset (some say: re-applying the radio stack upgrade) seemed to cure the problem for them. However, restoring a backup after that made it re-appear.
I did the upgrade, but not a restore. And now I also have the problem, so I guess it's some software overwriting some setting. Unfortunately I have no idea which. :-( Before the update the volume was a lot better.
Will try a hard reset tomorrow, and see if I can find out anything.
Cheers,
Daniel
"fixed"
ok, this problem was resolved after a HR, but!
as soon as i try to do SPRITE RESTORE for the new BACKUP (which i made after the HR) the volume comes back down!!
so!
no usefull fix..:-(
Basically only just got my SPV M600 yesterday, been faffing with it etc, and now ive lost all sound, have no idea why its not playing music etc, as all the sound levels are turned up.
Is there something im doing wrong? Secret silent button? lol
Cheers
Colin
Ok well, just done a reset to manufacturer standard settings, and still no sound
Col
do you have use a cabel head set?
I didnt get one with it. So answer to that is no.
Thanks
I just want my sound back, my alarm didnt go off this morning, made me late for work lol.
Col
hard reset is the decision...
how would i go about that?
Sorry im new to all of this.
thanks again lads
collywog19 said:
how would i go about that?
Sorry im new to all of this.
thanks again lads
Click to expand...
Click to collapse
just to warn you - you will loose all your information on the device - so take precautions, synchronize with PC... The hard reset is performed the following way - Press and hold the Camera and the CommManager buttons and in the same time reset the device with the stylus. Do not release the Camera and the CommManager button until you see a text asking you to format the FAT. Then press send and you are ready...
so that means ill even loose operating system? how would i go about putting it back on?
Jeez i sound like such a useless bugger, i build pc's for part of my living lol
All this mobile stuff is new to me though.
Thanks
EDIT :
just done hard reset, and its still got no sound
Col
well well, just upgraded to wm6, and still no sound, also, speakerphone in calls doesnt work, i get no ringtone, this is pissing me off lol
I just want my sound back lol
Col
heeelllpp
someone must have an answer lol
Col
ok, just found a 2.5 TO 3.5 JACK THINGY for sale at maplins, will go tmoro and then try headphones on it if that fails then i have no idea what steps to take next
Colin
does it have sound when u plugin ur headset? do you always plugin ur headset to the phone? i maybe think there's something wrong with the headset jack or slot, either short circuit or whatever, i am not sure as i am no expert.
last time my neo also like that..u can try and put the headset back in again, then try to remove it again, but maybe slowly. try a few times and i think it will be ok. from that that time onwards, i never use the headset...bought a bluetooth headset.
it worked fine last nite, and ive never used a headset. thats why im gonna buy a 2.5 jack to try some headphones tommorow, see if i get sound from them. ah well, have it less than a day and it breaks lol
Cheers
Colin
FIXED
was the red wire on speaker lol
w000t
Col
How did you fix that ?
My S200 have the same problem , i have a paper up the speaker on the red wire, but sometimes it rings,and sometimes not.
What is your trick ?
Check out this thread, it may help...
http://forum.xda-developers.com/showthread.php?t=234650
This post is for the Magician, but it may help with your prophet too.
Also, there was talk about a software bug that caused problems like this. The solution was to:
Call voicemail (or somewhere that you KNOW is generating sound)
Plug in your Headset, listen for sound...
Unplug the headset.
I dont know if that was the exact solution. The above post has a link to other posts, as well.
-j
i think your speaker is out. same problem as mine, tried the 'sponge' method & worked for a while, think mine needs to be replaced. prophet speakers tend to have a lot of problems from what i gather...
try searching in the prophet forum for 'speaker' u can find the thread that i'm talking about.
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
lip said:
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
Click to expand...
Click to collapse
This is going to sound crazy, but check to see if you have the Cyberon Voice Dial active. If it is NOT, then activate it and try to activate Voice Command with the headset. I could not get my handsfree to activate until I turned the Cyberon back on, which doesn't make sense but it worked and works every time, and I never get that stupid Cyberon thing popping up or doing anything. Also, do you just press the button on your Jawbone, or hold it in for a bit. I know on my one handsfree I could just press it, but on my new one I have to hold it down until I hear a beep (like 3 seconds). Hope this helps.....
Thanks for the reply!
Unfortunately I deleted all the registry keys and files relating to that software due to me thinking it was the culprit...
I'll do a hard reset and try that tonight and report back.
Thanks!
LIP
Actually the culprit of this problem is Windows Mobile 6. This problem has been discussed on past occasions and as of yet there is no solution that I am aware of.
Hi,
I don't understand why others can get it working but I can't.
I have done all the work arounds with the registry files, etc...but I cant even get it to activate through the BT headset.
I have went back to the default software as that works fine although I had to manually do the voice names.
Regards,
LIP
So, I've got a lovely bluetooth headset with a vibrate alert function that I really like using because I can keep the headset in my pocket. (damn near impossible to find one that does that, but that's another story) I had a problem where I kept accidentally pushing the 'voice dial' button. I managed to fix this by using a registry hack.
So, now what I want to do is re-map the button to run a program that will simply announce the time into the bluetooth headset. This program could be a mortscript, or something... I think. Anyway, any suggestions anyone?
Also, any ideas on something even cooler to map that button to?
Admins- feel free to move this thread around. I think this is the right place for it, but I'm not sure.
i think this is what you might be looking for....
http://forum.xda-developers.com/showthread.php?t=369281
on post 3