ive read the instructions on the frontpage but i cant find any of the settings it mentions on my pc or my spv m1000 is it not possible to do this with the himalaya or is there another way to set it up .
yes when you are connected to activesync using bluetooth you can just minimize activesync and start PIE
Related
I recently got a Bluetooth dongle for my PC but can't get my XDA-II to use any of the services !
When I select ActiveSync and the Sync with Bluetooth I get
'Cannot start communications with the desktop computer. The communications prt is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using the instructions provided by the manufacturer.'
When I choose Bluetooth settings and select 'Bluetooth ActiveSync Setup'->Start on the XDA II I get 'Please bond with other Bluetooth device which supports serial port or ActiveSync profile as your ActiveSync partner !
The PC has the ActiveSync service enabled and I am now stuck. Please help.
Try this utility.
http://bluetooth.i-networx.de/index_e.html
Install it, do a soft reset. Delete previous BT connection and find again.
you should get an option to sync on your XDA II with the specific computer.
:wink:
ActiveSync Via Bluetooth with Troy Windport
Have tried all suggestiosn including http://bluetooth.i-networx.de/index_e.html
Activesync starts to connect an then drops the connection
Have w2k, ActiveSync 3.7.1 and TRoy Windport bluetooth PCMCIA card, XDA II with Latest 6.10.50 upgrade
Only option left is to change/upgrade operating system to XP which I do not want to do.
Anybody got a better idea?
Thanks
[email protected]
try following this tutorial at geekzone
http://www.geekzone.co.nz/content.asp?contentid=2417
try to turn off infrared communication on ppc.
try to delete all bounded devices both pc and xda.
try to search for a bt device again.
You have to follow the above mentioned procedure. After that you start to search the device with ActiveSync.
ActiveSync will start to check all the serial ports, one port before it comes to the port that is used by your BT stack, you should start ActiveSync via BT on your XDAII.
This is the only way (for me) to get that crap working. After the XDAII and the computer have found each other, future syncs via BT are no (or at least not a big) problem. If the XDAII and the computer sometimes dot not find each other, try to sync 2-3 times, it will hopefully work then. Sometimes there seems a kind of timeout error.
I don't use BT anymore 'cause it is really a hard job to get it running. Even when I managed to establish the connection, after some days the connection gets lost again and can only be repaired by re-installing the BT stack or ActiveSync - I am really tired of beta testing all the bluetooth stacks and stopped to use it until the industry established a working standard...
I try a lot of time after install Tobias application for BT, but I can not see the new dialog after pair my XDA II with PC. Someone help me!
I had the exact same experience. I have not sorted out my the BT problems yet but suffered also from the interrupted connection using the cradle until I disabled Norton anti-virus and firewall.
HELP!
No connection possible between my PC and MDA-II.
Bluetooth Devices program in Windows XP SP2 comes up with "incoming port: 17", while ActivSync seraches only ports 1 to 9.
How can I make them listen to the same port?
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Rudegar said:
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Click to expand...
Click to collapse
Rudegar, I used this website for setup, but that Bluetooth-port problem still exists
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Rudegar said:
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Click to expand...
Click to collapse
I downloaded de Microsoft SP2 drivers (as mentioned at that Geekzone url).
i'm talking on the xda not on the pc
Rudegar said:
i'm talking on the xda not on the pc
Click to expand...
Click to collapse
On MDA-II I didnt change anything. I use the same drivers as provided within ROM 1.72.
hello guys... i'm just confusing
i'm try to connect my xda via bt as a modem ( i use sony erricson phone ) and make the connection as the dial up its working, but not work at xda II ,
i already make the pairing as the dial up cause i always going somewhere with my laptop and xda and connect to the internet via gprs, also i tried at the wi modem of xda through bt connection ...not work....anybody have suggestions..... thanks a lot
The XDA is currently not supporting the modem profile. You can use other device as modem but the XDA it self cannot be used as such via bluetooth.
Regards,
Mark
Hi,
In the following document you can find the answer. (last question)
This is for the qtek 2020 or XDAII with Win XP
Cheers
Somehow I managed to make a connection (pair the evices) but when it comes to establishing what kind of services can happen between the two devices, nothing happens. In the end, I have a connection, the devices show as paired but I can't move files or connect one to the other in any possible way. Any ideas anyone?
Runing ROM 1.66.00WWE
Radio 1.10.00
Protocol 1337.18
Ext ROM 1.66.131
on notebook running
Windos XPhome
Sony USB BT adapter
@MCEITLIN
To what device have you connected?
mark
I paired a vaio V505 tunning XP and my I-mate
Cheers
device
markutah said:
@MCEITLIN
To what device have you connected?
mark
Click to expand...
Click to collapse
i'm using the xda 2 and laptop ibm x 31 with bluetooth install from ibm, u got the answer
Re: device
@MCEITLIN and @benmuliono
If your devices are paired then you can active syn over BT to sync your device and the pass-through to connect to the internet.
Indeed you can't browse the network because the network profile is not supported by the Bluetooth stack used in the XDA.
To be able to browse the network you've to use the WidCom Bluetooth stack and a BT dongle on you PC/Notebook/Laptop whatever which supports the network profile or PAN.
The WidCom bluetooth stack can be found on this forum
Mark
hi ppl
as the title suggests can someone please post some info on how to setup an ActiveSync connection from my PC to my xda mini via bluetooth?
the mini is running Win Pocket PC 2003
thanks
http://www.geekzone.co.nz/content.asp?contentid=449
thanks!
however i get to the :
"Select the Options button..." - in Microsoft ActiveSync.
But the "options" button is actually greyed out for me, so i cant get any further...any ideas?
if it's on the pocketpc then first you need to bond with the pc
if it's on the pc then you need to choose a com port which the bluetooth use as a valid com connection if the pda use vidomm bluetooth stack then the site also have a guide to set it up using that
My magician doesn't have a bluetooth configuration like that in figures.
Mine is MUCH MORE simple.
Looking at the figures it seems that the bluetooth stack on that pocket pc is the widcomm...
Anyone knows how to upgrade the bluetooth stack on my Magician?
..or better.. is there a way to use it with the current bluetooth implementation?
prob because you picked the wrong guide?
http://www.geekzone.co.nz/content.asp?contentid=2417
Hi there,
I have an Qtek 2020 and I've installed WM2005.
ROM version 1.60a.00WWE
Radio Version: 1.14.00
Protocol version: 1337.24
I want to use newtwork access service but I cant.
when I want to setup this service in My Bluetooth places. it sais no Device found. and when I find manually it sais that your device has not network access profile.
I tried to install WIDCOMM BTW-CE but it didnt installed. it sais that no bluetooth radio found!!
I really need network access. Please help me!!!!!
if you can sync with activesync using bluetooth then you can connect
not sure if 2005 BT stack support the bluetooth PAN profile
and not sure if there are any widcomm out for 2005 yet
I had this problem also before I install WM2005 with the same error.
I thaught maybe I should upgrade my radio versio !!!!
the radiostack is only related to GSM not bluetooth
these are guides as to how you activesync with bluetooth
http://www.geekzone.co.nz/content.asp?ContentId=3163
http://www.geekzone.co.nz/content.asp?contentid=2417
Most of the time.. its more acurate when you connect from PC to PPC not PPC to PC.
I think my English is very bad
I can connect to ActiveSync without any problems.
My problem is to use Network Access service.
I have no problem with other services sych as Audio Gateway, Headset, Ativesync, Serial port and...
when you are connected with activesync then you have network access!
if you minimize activesync while it's connected then you can just open IE or messenger or what ever
that is unless you disabled it in activesycn on the pc or the firewall on the pc block it
or if you have set it to use your isp network insted of your my network in connections on the pocketpc
No... you didn't understand me.
I want have an IP address for my pocket PC as you connect with WiFi.
And explore the shared folder of the network PCs with Resco File Explorer.
Wee this picture.
When I connect with USB my pocket PC get and IP address and I can ping it.
I want to do this also when I connect via bluetooth.[/img]
oh dident know that activesync using bluetooth did not assign an ip to the xda2
well then there are 2 options i guess
1 find a widcomm or another bluetooth stack that works on 2005 which support the PAN profile (pan is network over bluetooth as in not using activesync)
2 downgrade to 2003SE or 2003 and get the widcomm stack which works for it and support PAN
I've installed the WIDCOMM. but the previouse BLutoth stack did't remove. and now I have too icons of bluetooth!!!
but widcomm did't work properly and it sais that: "The Bluetooth radio failed to turn ON due ro insuffivent driver menory available. [!!!] you must perform a normal reset before you can turn ON the Bluetooth Radio.
eAfzali said:
I've installed the WIDCOMM. but the previouse BLutoth stack did't remove. and now I have too icons of bluetooth!!!
but widcomm did't work properly and it sais that: "The Bluetooth radio failed to turn ON due ro insuffivent driver menory available. [!!!] you must perform a normal reset before you can turn ON the Bluetooth Radio.
Click to expand...
Click to collapse
Try to use PocketLanCe: www.pocketlance.com
I have the same problem... htc p4350, wm5 aku3/3.5 the wm device doesn't see the Network Access bluetooth service which the PC is running. (pocket pc doesn't seem to support Bluetooth PAN correctly). This is crap. In the year 2007, simple things like bluetooth pan shouldn't go unimplemented in an operating system built by the richest software company in the world. on a device i paid $500 for. i could implement this stuff myself in less than a week if the code weren't closed source. gosh i hate hate HATE our world.
also the pocketlance website is password protected..
Dear all,
I've tried almost everything to make a LAN bluetooth network, but no luck so far.
I've paired up my PDA with my PC, but at the end of the wizard I can't select any services, although I have a bluetooth network connection available in 'network connections'.
Is there some driver I need to install first ? I've heard something about 'PAN' for bluetooth wich is necessary for the use of internet over bluetooth ??
Can anyone help me how to do this ??
Oh yeah, I haven't got a XDA based PDA, but a DELL Axim X50v with windows mobile 2005, but i guess this is a general question wich is valid for all types of PDA's ?
Thanks in advance
the ms bluetooth stack dont support PEN
vidcomm does
or you can just connect to activesync then your pda
have the same network access as your pc unless you have
it disabled that is
I've already found the answer. (finally fieuw)
Now I can synchronize AND surf the internet through Bluetooth !!
http://axim.dpicts.com/