Hey!
I have a problem with my SD-Card under WM5, see here: http://forum.xda-developers.com/viewtopic.php?t=27071
Cya Steffen
Replace the card to a faster card. Had the same problem.
Related
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
I had the same problem with a Sandisk 256mb card.
I've found that it works fine with a Lexar 128mb card though.
So it looks like the XDA2 has problems with SD cards as well as a completely duff bluetooth implementation.
Re: SD memory Card files disappeared
raheeeb said:
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
Click to expand...
Click to collapse
Man thats bad news, have you tried doing a soft reset.
Also if you have a PC card SD reader try running Scandisk on the
card.
BTW as you can see it not a good idea to access your SD card while
programs/files are being installed / written to it.
HTH
Sandisk
ok interesting , i am also using Sandisk 256MB!!!
i tried soft reset and it didn't help.i will try to find a PC reader and see if i can get anything out of it or i might try to use it on my brother XDA 1 because most of the files were used on my old XDA with PPC2002 rom.
Hurray, its not just me then. I have a 128mb dane elec card and 70meg has disapeared. Im not sure if anything was on teh card previously and I dont have a card reader to check. Its most annoying!
Storage Card slot kaput
I bought a brand new generic 2GB SD card and had it working for a day. It just wasn't working anymore one morning I have left my XDA II overnight on the cradle. Now it wont accept any MMC or SD card I put on it. Any idea what could have gone wrong?
When it was still working I tried copying media files on it (in Microsoft knowledgebase they confirmed in order for media files to work in storage cards you have to create My Documents folder did this on the several cards I tested but to no avail)
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Maybe the card brand was too generic-- but then I tried other branded SD and MMC cards after the day my slot stopped recognizing and it still didn't recognize Sandisk (512) and Leica cards (64MB)
The SD card in question is still detected if you put it in a card reader then connect it to a PC
Help badly needed, I'm losing so much productivity with very small storage/ROM space
Hanshake said:
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Click to expand...
Click to collapse
Well, I'm using Kingston 2GB SD card and it works perfect... and it's a high speed card.
You may have your SD slot broken. My slot for example from time to time gets the card disconnected (let's say, every few hours), and I have to pull it off and put back in.
in a sdcard reader undelete tools from pc can recover files from sd cards as they can with harddisk
like undelte plus
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
Hi there,
Recently i had a problem with my jasjar: my sd card (1gb) apperars to be always "uninstalled". I tried to reinsert the memory card, soft reset the device, using another memory card... but the jasjar simply don't "see" the sd card installed.
I have many programs installed on my sd card... and I need space to store files, so please HELP! Anybody knowing something about this annoing problem?
Thank you all!
hey check in your registry settings that drivers for sd card are installed or got deleted by mistake
Thank you indeed for your replay! just a question: how can I see the registry? And what is the sd card key to verify? Thank you again.
hi, i had the same problem..i was using mini SD card with SD adapter and my universal could see it...so i just bought myself a new SD card from sandisk and have no problems now. the sandisk i am using now seems to be slightly thicker the the kingston i had.
thank you cudo, but my sd card is a "normal" size, with no adapter... and I used it with JJ untill 2 days ago, than always "uninstalled" :-(
i am getting the same issue is there any workaround?
Hey everyone,
For some reason, my HTC P3600 cannot detected anymore the MiniSD card.
It's weird, because the pda have used to run the MiniSD with TOMTOM and MP3 Files.
So, I checked my MiniSD on my laptop and everything is fine. I can read and write on it, and the 2 giga are well detected.
Has anyone have an idea about it ?
Thank in advance for your help.
Sylum
______________________
HTC P3600
MiniSD Corsair 2G
WM6
Try to copy everything in your memory card in a folder on your PC; format memory card and copy everything you saved.
you must use a memory card reader.
Hey guys,
How do you format your mini Disk card?
Hi
Very strange problem!
I recently upgraded to a 2mb minisd as my Trinity currently only has a 512mb card installed.
I copied everything from my current card to a folder on my pc, then copied everything from there to the new card. Both cards have no label and are formatted in FAT.
However, when I put the new minisd card in, all programs installed on the card no longer work as the phone lists the new card as 'storage card2'.
What's worse is that when I put my old card back in, that is now also storage card 2!
I tried a soft reset but it didn't help.
Any ideas?
Thanks
Matt.
Sorted! Restored a recent backup and now it likes the new card!