Related
Have you ever taken a look at the gallery section over on www.origamiproject.com ? It's filled with a bunch of pretty nice-looking wallpapers for UMPCs, but UMPCs aren't available until much later, rendering these small wallpapers useless... until now. I've picked ten different images from that gallery and customized themes for each of them (creating eleven themes total). I also enhanced the themes to fit in with a somewhat universal layout for the today screen.
Keep in mind that these themes are designed for Wizard users with the latest Qtek ROM (2.17 or higher) installed! The reason I say this is because the date on the today screen takes up two lines in the newer ROM, and the today screen background reflects the position of the date bar. If you're confused, take a look at the previews below, you'll see what I mean.
Anyway, as I was saying before, each theme has carefully selected colors to best match their backgrounds, and all of them work in both portrait and landscape mode. I tried my hardest to smooth out the gradients that sometimes give problems on PPC screens. Oh, and I also thought of a cheezy name for each one. :wink: The previews along with a ZIP of all the themes are attached to this post, so go crazy. And if you haven't updated to the latest ROM yet, shame on you. Go do it, you won't regret it.
P.S. - If anybody knows how to skin the Phone screen (where you dial the number and everything), PLEASE let me know. It really, really clashes with a lot of these themes...
AND... if anybody knows how to make the date take up only one line, move the clock to the top, and put the battery back at the bottom, that would be amazing. That way I could re-make all these themes so that they could work with EVERYBODY that has a WM5 device!
very nice. just applied the first theme on my exec :lol:
Great job with the themes! I hope you are able to find out about skinning the phone screen and reducing the Date Bar to one line.
Beautiful yanathin! Thanks for putting the effort into these great themes.
very clean look you have going on there.
Are those icons along the bottom just regular shortcuts? If so I'm gonna have to look into how to do that myself.
great work!
Thanks for the compliments everybody! Yes, the bottom basically acts like SBSH iLauncher or SPB Pocket Plus's launcher. It's a single part of the PHM PowerToys ( http://www.phm.lu/Products/PocketPC/PowerToys/ ) called "TrayLaunch." You'd be utterly amazed at how fast this device runs WITHOUT SPB Pocket Plus installed, even without a "real" close button.
Amazing themes and even better work yanathin!!
Yes great work !
Thanks
Really nice ones, allready installed, thx !
change background dialpad
I haven't found a way to change the keys of the dialpad yet but i have a simple way to change the background of your dialpad in combination with plain darkgrey keys:
Download the attached file and run it on your mobile to get the darkgrey "keys" from Vodafone, these keys match best with whatever background you want to use:
(file is also at: ftp://xda:[email protected]/Wizard/Misc/Vodafone_dialpad.zip)
Next you create in MS Paint / Photoshop or whatever program you like, two BMP image files with the following properties, you can use any file as background.
- name: "Bkgnd_Port.bmp" / resolution: 240x268 pixels (portrait)
- name: "Bkgnd_Land.bmp" / resolution: 320x188 pixels (landscape)
Copy these files to the \windows folder on your mobile and overwrite the existing vodafone skin.
After a soft-reset your dialpad has changed!
I changed mine to plain gray:
I love those themes!
for dialpad skins, take a look at http://www.zombienexus.net/
thanks for sharing. here's a link to some of my simple themes.
http://www.modaco.com/wizard_themes-t238175.html
Thanks for sharing )
knight4led said:
very clean look you have going on there.
Are those icons along the bottom just regular shortcuts? If so I'm gonna have to look into how to do that myself.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=42913&highlight=
lpasq said:
http://forum.xda-developers.com/viewtopic.php?t=42913&highlight=
Click to expand...
Click to collapse
Hi,
Anyone know where to get a copy of PHM TrayLaunch? as the main site seems to be down
Cheers
Shaiboy_UK
shaiboyuk said:
lpasq said:
http://forum.xda-developers.com/viewtopic.php?t=42913&highlight=
Click to expand...
Click to collapse
Hi,
Anyone know where to get a copy of PHM TrayLaunch? as the main site seems to be down
Cheers
Shaiboy_UK
Click to expand...
Click to collapse
it's right there on page 1, post 1 at the bottom!
Re: change background dialpad
1-2tje said:
I haven't found a way to change the keys of the dialpad yet but i have a simple way to change the background of your dialpad in combination with plain darkgrey keys:
Download the attached file and run it on your mobile to get the darkgrey "keys" from Vodafone, these keys match best with whatever background you want to use:
(file is also at: ftp://xda:[email protected]/Wizard/Misc/Vodafone_dialpad.zip)
Next you create in MS Paint / Photoshop or whatever program you like, two BMP image files with the following properties, you can use any file as background.
- name: "Bkgnd_Port.bmp" / resolution: 240x268 pixels (portrait)
- name: "Bkgnd_Land.bmp" / resolution: 320x188 pixels (landscape)
Copy these files to the \windows folder on your mobile and overwrite the existing vodafone skin.
After a soft-reset your dialpad has changed!
I changed mine to plain gray:
Click to expand...
Click to collapse
please direct me to an english cab
Re: change background dialpad
lpasq said:
please direct me to an english cab
Click to expand...
Click to collapse
As far as i know it's a cab from German Vodafone. It works perfectly with my Dutch NL ROM, therefor i think it should also work with a WWE ROM because it just gets the language of the ROM-version.
Guys,
Not sure which version has the phone skin as below but I know it is not the HTC or Vodafone. If possible can someone please dump and zip the relevant files for this skin if they have it (English version).
Just to add, I have tried to disable the operator skin but it then only gives me a 2D plain pad with no Video Button etc...
Many Thanks
There are some phone skins HERE in the wiki, however, I don't think the one your looking for is there...yet.
Thanks, I had already tried all the skins listed. I presume this one is the default "3D" WM5 phone Skin, not positive though. Most have replaced this with their own skin in the actual rom rather than external rom.
Someone must have this though, perhaps on Orange, 02 or Dopod version.
Any help is greatly appreciated.
I think I got it all...
cieplowski said:
Thanks, I had already tried all the skins listed. I presume this one is the default "3D" WM5 phone Skin, not positive though. Most have replaced this with their own skin in the actual rom rather than external rom.
Someone must have this though, perhaps on Orange, 02 or Dopod version.
Any help is greatly appreciated.
Click to expand...
Click to collapse
This is the default installed dialpad from the latest Hermes i-Mate ROM.
Hopefully I got every BMP and DLL file associated with this dialpad. I also exported the registry items associated with this dialpad.
Try this:
Unzip the files into the Windows directory on the Hermes, then import the included registry file.
Let me know if I missed anything.
Thanks Freshster,
After some persevering with copying the files over all looks fine except the VT Button, for some reason this is still the same as before despite the files being overwritten. I also have VCBtn.. and VTBtn.. files (may be due to previous installs. I have renamed your files to these, and copied them over, this changes the button but it is not perfect as there are pink corners visible and the is no text etc.. on it.
Also looks like the .dll that contains the Call History Icons overwrites the Icon that displays the "G" "U" in the top bar, I used to have 3G etc.. but now have "G" and "U".
Also, the Icons whilst in the Video page have not changed.
One more thing thing, the IntelliDialler small icons are not there either, on my v1650 they are in a file called "indialer_calltype.bmp", in fact need all the Intellidialler files..... as mine is all grey.
Have played for a while now but am at a loss, sorry.....
Any advise appreciated.
Greatly appreciate you time on this.
cieplowski said:
Thanks Freshster,
After some persevering with copying the files over all looks fine except the VT Button, for some reason this is still the same as before despite the files being overwritten. I also have VCBtn.. and VTBtn.. files (may be due to previous installs. I have renamed your files to these, and copied them over, this changes the button but it is not perfect as there are pink corners visible and the is no text etc.. on it.
Also looks like the .dll that contains the Call History Icons overwrites the Icon that displays the "G" "U" in the top bar, I used to have 3G etc.. but now have "G" and "U".
Also, the Icons whilst in the Video page have not changed.
One more thing thing, the IntelliDialler small icons are not there either, on my v1650 they are in a file called "indialer_calltype.bmp", in fact need all the Intellidialler files..... as mine is all grey.
Have played for a while now but am at a loss, sorry.....
Any advise appreciated.
Greatly appreciate you time on this.
Click to expand...
Click to collapse
Hi cieplowsk,
I have attached ALL of the BMP files currently in the i-Mate ROM Windows directory. This should help you find which images you are missing.
I don't know if I can help you with the G and U problem, but these BMPs should help fix the VT Button, Video page, and Intellidialer icons.
Let me know how it goes.
Copying all the files, once I had removed non phone connected ones worked a treat, I now have the iMate Dialer which in my opinion is much nicer than the Vodafone and HTC ones....
The only thing left is for someone to butcher the .DLL`s to remove the Call History icons and stick them back in to the original Vodafone ones so that we can keep the 3G network icons rather than the U and G icons.
Oh and create a CAB file. Not asking much am I!
Thanks again for your time and effort!
Thanks. Just installed it too!
Cab would be great too.
One more thing I have just noticed, after changing the background on the phone pad, is thet the Video button and the other buttons on the Video Call page do not have transparent corners.
I have just spent a while editing the bmp`s and colouring the corners with colour R=255, G=0, B=255 (Magenta) in Corel Photo Paint (did not change the bmp format and it appears to be the same as the other bmps which are correct). When loaded the corners actually come out magenta rather than transparent. I guess I am missing something somewhere Any budding artists out there care to elighten me or have a go?
Cheers.
Hi cieplowski,
I had the same problem, but after adding the registry keys in the previous post it will work.
I've made a CAB file so you can install it in one go.
Cheers,
Drifter
Thanks Drifter,
Nice work but I think that there may be an isssue as when I install it does not skin the Video button at all, not sur if some files are missing from the cab. Have tried 3 times now.
Cheers!
Did you try a Soft Reset after installation?
CAB file seems to work with my HTC.
Cheers,
Drifter
Yeah several times, will try again later tonight. May be down to the fact I have the Vodafone version and the phone pad is in rom...
If I manually copy over the files it is ok.
On the other point re. the corners of the Video button, even if I import the reg. settings, then change the wallpaper to something lighter in colour the corners are not transparent, it you edit the .bmp files you can see that the corners on the video button are not transparent but filled in.
Cheers.
Drifter said:
Hi cieplowski,
I had the same problem, but after adding the registry keys in the previous post it will work.
I've made a CAB file so you can install it in one go.
Cheers,
Drifter
Click to expand...
Click to collapse
How did you create the CAB? What prog did you use?
It seems that you are missing some files in there, like the important DLL files listed in the registry settings. You have also included some unnecessary BMP files.
Thanks for your work.
Freshster,
I've used your second post with attachment to make this cab file.
But used the registry key from the first.
Now I see these dll file from the first and forgot to implement them in my cab file.
This could be the problem for cieplowski.
I will make a new one but should I use the first or second post?
I've use WinCE Cab manager for making these files
Cheers,
Drifter
Freshster,
I've used your second post with attachment to make this cab file.
But used the registry key from the first.
Now I see these dll file from the first and forgot to implement them in my cab file.
This could be the problem for cieplowski.
I will make a new one but should I use the first or second post?
I've use WinCE Cab manager for making these files
Cheers,
Drifter
Hi Drifter,
Please find attached .zip with all the necessary files, I think. not sure if you know how but many of the .bmp`s are missing transparent corners.
You can see this if you view them as thumbnails or open them. This does cause a problem if you change the background from the default one supplied as some of the buttons no longer have nice rounded corners.
I have tried to edit them as mentioned above but have not been successful.
Can someone advise on what program to use to make these transparent and the process. I am happy to edit them all but just need to know the process.
Cheers.
Skinning...
cieplowski said:
Hi Drifter,
Please find attached .zip with all the necessary files, I think. not sure if you know how but many of the .bmp`s are missing transparent corners.
You can see this if you view them as thumbnails or open them. This does cause a problem if you change the background from the default one supplied as some of the buttons no longer have nice rounded corners.
I have tried to edit them as mentioned above but have not been successful.
Can someone advise on what program to use to make these transparent and the process. I am happy to edit them all but just need to know the process.
Cheers.
Click to expand...
Click to collapse
This does look like all of the files necessary.
For the transparency problem I would take a look at the following link and make sure you are doing everything correctly:
http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/catid,36/id,5075/#5075
The two things that I would be sure of is:
1) the transparent color is : RGB=FF,00,FF (255,0,255)
2) you have to create buttons and background in bmp 8 bits 256 colors
Hope this helps, but the original files should have worked for you, not unless your ROM is looking for a different transparency color. Which ROM are you using? Can you post screenshots of the problem images?
Hi Freshter,
I cannot post anything at the moment as left my phone at the office. However if you have time could you change the Bkgnd_Land.bmp file to one much lighter in colour, hopefully you will then see that the corners are not transparent on the Video Call button (and all other vidoe related buttons). From what I can see using the supplied background just disguises these corners. If you open, for example, VTBtnDn_Port.BMP in any editor or viewer you will see that the corners are not transparent (magenta) in colour and they even have a gradient so cannot be transparent.
I am pretty sure the rom and all eles is ok, as the other files, which if examined will show the corners as a magenta colour and these are transparent on my phone, it is only all the Video related buttons which do not have the transparency on them.
I shall keep looking to see why my efforts were not successful in sorting the corners so far.
Cheeers.
Hope this explains things a little better.
cieplowski said:
Hi Freshter,
I cannot post anything at the moment as left my phone at the office. However if you have time could you change the Bkgnd_Land.bmp file to one much lighter in colour, hopefully you will then see that the corners are not transparent on the Video Call button (and all other vidoe related buttons). From what I can see using the supplied background just disguises these corners. If you open, for example, VTBtnDn_Port.BMP in any editor or viewer you will see that the corners are not transparent (magenta) in colour and they even have a gradient so cannot be transparent.
I am pretty sure the rom and all eles is ok, as the other files, which if examined will show the corners as a magenta colour and these are transparent on my phone, it is only all the Video related buttons which do not have the transparency on them.
I shall keep looking to see why my efforts were not successful in sorting the corners so far.
Cheeers.
Hope this explains things a little better.
Click to expand...
Click to collapse
I made the background lighter and I see what you mean now.
It seems that the Video buttons may have something to do with a resource dll, but I can't find which one it is.
Check out the following link; it shows how to fix the Video button on a MDA Pro, but our ROM doesn't contain the "phcanlrc.dll" or the "phcanprc.dll" files to modify.
http://buzzdev.net/component/option...view/id,13650/catid,36/limit,15/limitstart,0/
This is something to really think about.
I guess you could just modify the BMP files to match your background, but that would be tedious.
Dear all,
I'm just trying to find a nice theme for my Tytn. Up to know I prefer the Windows Defeault (the blue one) instead of the Htc_default. Just one thing, is there a way to match the phone application with the Windows Default theme colours. I mean, when you press the talk button and lanch the phone app (the one with the phone keyboard or the call list) it is always in green (wallpaper, buttones, etc). Is there a way or a software to modify it and make it in blue?
Thanks alot, Diego
http://www.pocketpcfreewares.com/en/index.php?soft=770
http://www.bvrp.com/eng/products/pocketthememanager/Default.asp
Hi,
Check out this thread;
http://forum.xda-developers.com/viewtopic.php?t=60958
Download the attached file, copy to your TYTN and install to main memory.
Hope it is what you are looking for.
Cheers!
very nice although maybe a bit dark. Is it possible to unwind it.....
Hi,
I guess you could edit all the buttons and change the backgrund to make it lighter in colour but it is a lot of work!
One thing I did notice and have tried to overcome it by editing .dll files with no success is that the Video buttons do not have transparent corners so if you change the background the corners are visible. However once you decide on your background you can then edit the VT buttons and colour the corneres to match.
Google "WinCE Cab Manager", download it (if you dont have it already), you can then edit the Cab file.
Please share any changes you may make.
Cheers.
cheers
OK, here is one with a lighter blue background so you can see the black text better
That's awesome... now I just need to find how to change the skin of the "communication manager"... where you can turn on/off BT, Wi-Fi etc... this is still in red :-D
Thanks alot to all of you... you rock!
Diego
Yo!
Like the topic says, is it possible too change the background color in the application folder? It's standard, and boring white now, and i want it black with white text. Is this possible?
Maybe with a small application or something?
So.. Do you understand the words that comes out of my mouth?
The first one to solve my problem will win a imaginary Porsche 911 Oh lala
Try this:
http://msdn2.microsoft.com/en-us/library/bb416463.aspx
Thanx, but i don't understand it hehe..
I'm quite a n00b in Windows Mobile..
PS. i don't have a Windows computer either.. I'm using Mac, so f.ex, i can't use "Theme Creator" thingy.. So it must be done on the device, and not on a desktop computer.
Vinny75 said:
Try this:
http://msdn2.microsoft.com/en-us/library/bb416463.aspx
Click to expand...
Click to collapse
That link has nothing to do with the background on the Programs screen.
nonegiven said:
That link has nothing to do with the background on the Programs screen.
Click to expand...
Click to collapse
id like to know how that works, if somebody tells i will format all the needable program icons with white border and inline shadow so it looks better this would be cool
I believe SKTOOLS (a ppc program that can manage quite a bit of settings) allows you to tweak your theme on the fly.... I do believe when you change the background color of that folder, it will change it for all folders... Completely unsure if this will work though due to the fact that I have never tried
try ui tweaker
With ui tweaker you can do this (sys colour change).
BUT I was not able to do a complete black n´white as the popup windows (notification of new sms, reminders....) still had a black font on a black backround and then i was unable to read :-(
The software is enclosed as well as my try of pure black - in case you hve a touchflo installed...The colour of the buttons have to be different from black then or touchflow will not work.
In case you manage to get a fully black theme working please send me the regfile from ui tweaker as I would be also interested.
Enclosed a screenshot wit my current solution - grey coloured
But you can also import the settings into uitweaker (allesok....sys) and try...
henftling said:
With ui tweaker you can do this (sys colour change).
BUT I was not able to do a complete black n´white as the popup windows (notification of new sms, reminders....) still had a black font on a black backround and then i was unable to read :-(
The software is enclosed as well as my try of pure black - in case you hve a touchflo installed...The colour of the buttons have to be different from black then or touchflow will not work.
In case you manage to get a fully black theme working please send me the regfile from ui tweaker as I would be also interested.
Enclosed a screenshot wit my current solution - grey coloured
But you can also import the settings into uitweaker (allesok....sys) and try...
Click to expand...
Click to collapse
Thank you so much! :d
I will try this later today, and see if it works
Yey!
<HENFTLING>:
I tryed out your colorscheme, and it's great! It's not perfect, but much better compared to my version hehe...
BazookaAce said:
<HENFTLING>:
I tryed out your colorscheme, and it's great! It's not perfect, but much better compared to my version hehe...
Click to expand...
Click to collapse
lets keep this thread alive, dont want it "half done" and closed. this is not solved right now
Help me please!
How to restore default "white" colour? Soft Reset and Uninstalling UIT dont help!
Kpyto said:
Help me please!
How to restore default "white" colour? Soft Reset and Uninstalling UIT dont help!
Click to expand...
Click to collapse
just start ui tweaker and go to "menue -> Reset" voilá ;-)
Tha1nOnly said:
lets keep this thread alive, dont want it "half done" and closed. this is not solved right now
Click to expand...
Click to collapse
Hehe.. Yeah, i know
Isn't there a programmer out there who can make a app. witch is easy to use.. and stuff..?
Or(!) A creative soul out there who can make a nice colorscheme for UITweaker?
One more thing.. Is it possible to make a .tsk-file with a "total" black interface? Like henftling's colorscheme..?
It's quite dead here now..
*bump bump*
one of the problems with UITweaker is that it can be a bit vague which part of the system you are changing the colour of, and then you have to soft reset to check if it looks ok, if not then back into it, change back, soft reset again, back into UIT and try something else.
i want a kinda slate grey / black theme as well, but the ones already made out there are a bit messy and you end up with wrong colours here and there, not being able to read things or see notifications.
also i get the feeling that not every aspect of the UI is actually changable, at least in UIT anyways...
it would be great though, we have all these nice finger applications in black / grey and then they all cut back to the dull old Windows white when you want to do something proper.
when will Microsoft hire some graphic designers for a change instead of letting the boffins do it all?
Dr J said:
one of the problems with UITweaker is that it can be a bit vague which part of the system you are changing the colour of, and then you have to soft reset to check if it looks ok, if not then back into it, change back, soft reset again, back into UIT and try something else.
i want a kinda slate grey / black theme as well, but the ones already made out there are a bit messy and you end up with wrong colours here and there, not being able to read things or see notifications.
also i get the feeling that not every aspect of the UI is actually changable, at least in UIT anyways...
it would be great though, we have all these nice finger applications in black / grey and then they all cut back to the dull old Windows white when you want to do something proper.
when will Microsoft hire some graphic designers for a change instead of letting the boffins do it all?
Click to expand...
Click to collapse
I'm totally agree with you. UITweaker is anoying with the soft-reset crap all the time.. And yes, Microsoft should hire some new graphic-designers.
So.. i know that it exist many programers in this forum, and i don't think it will be that difficult to wright a app. that can change the background color and stuff..
So.. we just have too wait until a programer is reading this thread i guess.. hehe
"also i get the feeling that not every aspect of the UI is actually changable, at least in UIT anyways..."
I used to play with an application like this way back when I had my hp 2210, and the problem then was that not all of the colors of the UI were independently tweakable.
It is probably so with this as well as you can see from henftling's screenshot. The bars for his signal strength have changed to gray as well as his backgrounds. So the same registry entry is controlling two separate parts of the UI, which means no matter how much you play with it you will probably get some unreadable text.
I wish I could find the old software that I used to use, as it was pretty user-friendly and I think it showed you a preview of what you were going to get so you didn't have to reset each time. Sorry, I have searched and searched.
One thing I did find was this: http://www.freewareppc.com/utilities/rcmod.shtml . It looks like it gives you some idea of what you are changing before you change it. Perhaps it will help you guys.
Give SKTools a try
It worked for my Elf
Regards
grodi said:
Give SKTools a try
It worked for my Elf
Regards
Click to expand...
Click to collapse
...even with he textcolour in the notifications window? I tried SKtools first but have not managed to get this text in the reminders bubbles etc modified...maybe you tell me / us if you have managed and how you have managed this?
Thanks in advance
henftling said:
...even with he textcolour in the notifications window? I tried SKtools first but have not managed to get this text in the reminders bubbles etc modified...maybe you tell me / us if you have managed and how you have managed this?
Thanks in advance
Click to expand...
Click to collapse
It works for EVERYTHING
I don't know the menu option in english, since mine is spanish translated, but should say something like "system improvements", and then go to "colors" tab. That's it.
Hope it helps
im trying to change my icons on the manila but only some of them change does anyone know how to fix this proble thanks
Which icons have you changed and which ones are not changing?
the weather and the calender changed but the others did not music, internet search, settings, people,home
What program are you using to change the icons?
I have been using cfc-gui to change my icons and they are grouped together depending on what they are (i.e. - tray, hero, people screen, weather screen, etc.).
Are you trying to change your "tray" and "hero" icons or icons within each tab?
no programs just cabs from different people on this site
You're not making the rookie mistake that I made and installing a cab (to change the icons) on top of one that is already installed?
yup, so what do I do? Help me learn
Just uninstall all of them and soft reset. You should be okay.
how do i do that? where do i go
Click the Start button in the upper left hand corner.
Start>Settings>System>Remove Programs
Select a program and click "Remove" in the bottom right hand of the screen.
sorry for the missunderstanding i knwhow to remove programs i want to change the icons but i dont know why only some changed and would like all of them changed
It depends on the cabs. Some people change all of them and some only change some. For instance, my cab that I have installed doesn't change the photo, music, or AT&T tabs because I didn't include them in the changes.
can anyone post these? im trying to change the calendar and history icon under my clock.
ca3sar said:
can anyone post these? im trying to change the calendar and history icon under my clock.
Click to expand...
Click to collapse
You need to edit a manila file for that.
Its this one 1bbfdc9b_manila
Sorry for the lat answer you asked in my theme threat.
jcterry said:
Just uninstall all of them and soft reset. You should be okay.
Click to expand...
Click to collapse
No way he can do that
Reason he intalled diferent themes on top of others so soon he uninstalles one wen he gos for the next on there will be an error cause windows will not find a second backup of the original.
Sorry to tell you but you need to hard reset your device.
for anyone trying to modify there manila icons.
Use CFC Gui.
Intructions easy way.
Connect you phone on Sync to you device start CFC GUI should be a options to extract all manila files from you phone.
After that you will see all kind of images change the one you want then send it to you phone from CFC GUI more instruction on CFC Gui threat.
Hope i help you all
Sergio76 said:
Reason he intalled diferent themes on top of others so soon he uninstalles one wen he gos for the next on there will be an error cause windows will not find a second backup of the original.
Click to expand...
Click to collapse
So it won't just uninstall what it can "find" and not worry about what it doesn't?
Also, when unintalling a program/theme, how does it know what to revert back to? Are the original files not overwritten/deleted?