any way to transfer a call to a headset? - MDA II, XDA II, 2060 General

My situation:
I'm using a stock 1.72GER T-Mobile ROM, 1.17 Radio and a self-cooked ExtROM. There are no bluetooth hacks whatsoever installed. Handsfree seems to work well since my Bluetrek G2n works simultaneously on both my Himalayas. Outgoing calls use the headset, incoming calls can be answered with the headset.
My Problem:
Once a call is "transferred" to the telephone, there is no way to get it back onto the headset. I know there is a feature like that on the Blue Angel. Anyone know a solution?
Thanks

Related

any way to transfer a call to a headset?

My situation:
I'm using a stock 1.72GER T-Mobile ROM, 1.17 Radio and a self-cooked ExtROM. There are no bluetooth hacks whatsoever installed. Handsfree seems to work well since my Bluetrek G2n works simultaneously on both my Himalayas. Outgoing calls use the headset, incoming calls can be answered with the headset.
My Problem:
Once a call is "transferred" to the telephone, there is no way to get it back onto the headset. I know there is a feature like that on the Blue Angel. Anyone know a solution?
Thanks

A2DP and Handsfree question

I have successfully made my ANYCOM stereo Bluetooth headphones ( http://tuxtops.com/node/464 ) to work wtih my HTC Wizard using the "wireless stereo" instructions that were posted the other day on this forum.
When you set it as "wireless stereo", is it supposed to also switch to handsfree functionality automatically? You see, over here this doesn't happen. The music stops when I get an incoming call, but I don't get the person's voice through my headset. The headset does not switch to handsfree mode.
Is this normal? Or something else is wrong?
I connected to my headset by clicking "set as a wireless stereo". If I also click "set as a handsfree", I don't get any music you see. So, why my headphones don't automatically change mode to handsfree on an incomming call? Anyone else with this problem?
i have the same problem but it doesn't bother me.
but if there is a fix then this would be cool and easier.
A2DP support for HTC Wizard can be obtained by using this hack/tweak: http://forum.xda-developers.com/viewtopic.php?p=275506#275506
didn't try it myself, but has been reported to work on HTC Wizard and other Windows Mobile 5 devices.
CIAO!
VOODOOS!L
Any solution so far?? I will receive my Anycom BSH-100 within the next days...
I don't think there is a solution apart from praying for a new ROM.
it might be a problem with the headset and rom
did you try repairing it?
because i know everything works fine for me using itech stereo
when a call comes in, it switches no problem

Issues with my BT motorola headset and TyTN

I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.

VC 1.6 announcements over BT Headset

I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)
I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.
I wonder how hard it would be to get that little program to run automatically when connected to a head set
yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.
Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.
I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos
I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.
I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB
VC Caller ID over Bluetooth
I think you all will enjoy this hack
where did u find this hack from? is it reliable?
jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone
hell no considering this a brand new mda tmobile just sent me lol..
jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.
but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!
Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file
What exactly does the file do???
I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?
I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??
Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?
I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.

[Q] Bluetooth headset - unable to answer incoming calls

Hi
I have paired Motorola H670 bluetooth headset device and no problems with outgoing calls, however when somebody is calling and I try to anwer it, it always answers on in-phone speaker instead of bluetooth headset.
I don't know what to do, but it is essential to be able of answering phone via bluetooth headset.
Currently I have windows 6.5, however 6.1 had the same problem with answering calls. I am using S2U if it matter and HTC Home.
Any suggestions?

Categories

Resources