Hi
ON my nokia I had wap access to check headlines and football scores. How do I enable the same facility on an XDA ?
You need to run a seperate WAP browser, like EZ WAP. Search the boards here for EZ WAP and you'll find links to places to get it. Once you have it, there's a great WAP config description for T-Mo at:
http://forum.xda-developers.com/viewtopic.php?t=3675
Hope this helps
I've tried following the steps given in several different threads for configuring this on my XDA but have been unsuccessful. I've been trying to use EZWap to configure it, but it cannot connect. I think its something to do with my network connections on my phone that just arent right. Can anyone walk me through setting up the actual network connection settings for WM2003? Any help would be greatly appreciated.
i installed the mms from the O2 uk rom... (from zip posted here somewhere)...
i get mm2 notifications, but i cant download them...
any ideas?
WAP using IE in WM2003
Supposedly IE in WM2003 has support for WAP browsing. However, when I set up a "TZONES" connection and set up the AP to ( wap.voicestream.com ) and the proxy to ( 216.155.165.50:9201 ), and I try to navigate to:
wap.myvoicestream.com
It no longer works. However, if I navigate to any "regular" www page, it comes up just fine. Has anyone else successfully been able to configure their WM2003 ( TMobile PPCPE ) to access their TZones via IE using the WAP connection/Proxy settings ?
I was thinking of installing EzWap 2.5 again, but during the install it said it was going to replace wapdrv.dll and I wasn't going to run the risk of overwriting a necessary file, so I exited the installation of ExWAP.
Anyone gotten this to work ???
[/b]
Eureka !!! You don't need EzWap or Klondike !!!
<Edited - It was LarryH from Horward Forums who originally helped me out with this...it was his idea to try out a different URL monicker. Thanks again Larry ! >
With LarryH's help, we've discovered that it IS possible to access T-Mobile's TZones pages once you've undergone the upgrade to WM2003 from T-Mobile's SITE.
After you set up your connection to use the WAP accesspoint:
wap.voicestream.com
Under Proxy Settings:
WAP: 216.155.165.50 port: 9201
SWAP: 216.155.165.50 port: 9203
You don't have to set the HTTP or SOCKS,
as TMobile doesn't support SOCKS, and the HTTP port ( 80 ) is already open on their gateway server.
To access your TZones homepage, just open IE, and enter:
wsp://wap.myvoicestream.com
apparently entering:
http://wap.myvoicestream.com
will confuse IE in WM2003 for PPC, and
it will say "Unable to find page".
Everyone, enjoy your TZones under WM2003.
Marcelo
but my MSN Messenger don't work
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
do i need to set up something else? or purchase other data plans from tmobile?
Re: but my MSN Messenger don't work
yfei said:
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
I just tried that on my PPC PE and I was able to sign on to MSN Messenger. Are you sure you have the Connection you set up to access the proper proxy address and ports. Make sure you setup the user/password for your msn account properly, because if you type it in wrong, it won't let you log in.
Let me know if you run into any problems.
Marcelo
Click to expand...
Click to collapse
Awesome !!!
Now I can have MSN Messenger using T-Zones / WAP access. This is wonderful.
Now with just WAP, I have acesss to port 80 & 110 and MSM messenger.
Thanks a bunch!!!!
-JB
t-mobile UK ??
Does anyone know the WAP settings for t-mobile uk ?
OK my settings are:
cellular line GPRS
access point name: wap.voicestream.com
user name password and domain all blank
proxy settings this network connects to the net check
this network uses a proxy server to connect to the net checked
proxy server is 216.155.165.050
under the advanced part all but socks are set to same IP
WM2003
I connect to GPRS but it says page cannot be found
any ideas why?
figured it out and took out the proxy stuff and access the web now.
I would also like the uk settings and a fool proof step by step instruction, please.
Thanks for any guidance
My problem is that when i try to aces to a chatroom like volano, the chatroom applets tells me that my port 8080 is locked so they can't create a connection.
What can i do?
PS this is what i see when i try to connect to that chat:
You may be trying to connection through an HTTP proxy server. The VolanoChat applet cannot connect to the VolanoChat server through an HTTP proxy server because it doesn't communicate using HTTP. Try switching the connection to a SOCKS proxy server or try using a network address translating (NAT) router for your firewall, if either of those options are available for you. VolanoChat works fine through a firewall using SOCKS or NAT. Your network administrator may be able to help you change your settings to work with VolanoChat.
thanks :?
IF i use the Qtek as a modem for my laptop it works, so i think that it colud be a problem of net front and Jva.
Please can someone help me??????????????????
:?: :?: :?: :?: :?: :?: :?: :?:
I have two proxies I should insert in my proxy settings in the connection icon. One to be used when I connect my JAM to PC through bluetooth to be able to use the internet connection I have (10.0.0.1) and the other I have to replace it with my WAP configuration to be able to use WAP over GPRS (192.168.23.50) . Any method you have guys to put them both without each time I want to connect I have to erase the old proxy and insert the new one. Your help is greatly appreciated.
cnadra said:
I have two proxies I should insert in my proxy settings in the connection icon. One to be used when I connect my JAM to PC through bluetooth to be able to use the internet connection I have (10.0.0.1) and the other I have to replace it with my WAP configuration to be able to use WAP over GPRS (192.168.23.50) . Any method you have guys to put them both without each time I want to connect I have to erase the old proxy and insert the new one. Your help is greatly appreciated.
Click to expand...
Click to collapse
Why do you need second proxy??? You can use your Pocket Internet Explorer over usual GPRS connection to view any WAP resources and it will be cheaper because GPRS traffic usually cheaper than WAP
I see only one reason to use WAP gateway - is to be able to access operator's content pages
Thanks for your reply. I need my ISP proxy since I am able to view any homepage as it is and not in WAP mode so as if I have a GPRS connection but only restricted to Internet explorer. I cannot use for instance the MSN messanger and other internet related applications .
and if I put the 10.2.2.1 proxy and leave the wap proxy 192.168.50.23 and try to browse through internet explorer it gives me an error
Any help would be appreciated.
Hi guys!
Can I configure the Internet Explorer of my Jam to use athe WAP connection?
I have 100MB free 1 for WAP-GPRS connection a month and I'd like to use them to connect to the internet with the Internet Explorer of my Jam....
Is it possible? How can I configure all the internet connection request to my WAP connection?
yes you can do it, just have to configure WAP gateway IP in proxy setting to port 9001, in connection you have to choose right APN in magician named Access Point and of course login and password
to use wap in IE you have to use wsp:// instead http:// so when you setup your connection properly with proxy gateway on port 9001 or the one your provider use to open wap pages in IE write addresses in this format wsp://wap.name.com
Thanks!
pleeeeeeeeeeeeeeease help me finding any program or settings that allow me to use a http proxy surfing the internet i have tried alot of ways but nothing are working with this stupid windows mobile now i really hate this windows because of this so please help
settings->connections->connections->
pick your isp network and click Manage existing conections
click proxy settings
check this network uses a prozy server to connect to the internet
type in your http proxy in the
proxy server textbox