Related
Did anyone experiment with integrating a wi-fi SDIO card INSIDE the Magician? I am curious to know if there is enough space inside the case to solder in the internals of the Sandisk WiFi card.
Would also be interesting to know if it is possible to integrate the Sandisk 256 meg wifi card but leave out the Mem and wire it back to the SDIO pins so that the card slot could still be used to plug in a 1g-2g card and still enjoy built-in wifi...
Thought I ask it here, perhaps someone heard something. In case I put a bug in anyone's ear, a reminder that experimenting with something like this will void the warranty... so at your own risk But if you decided to do it, let me know
I think that's impossible because there is almost no space inside the magician. Moreover, such modification will mostly disable the fuction of the SDIO slot when you enable the sdio wifi card, I blieve it is pointless to do so.
Why don't buy a blue angel or wait for the next generation of magician if you really need wifi but do not want to use an external wifi sd card.
Sorry for jumping in here . ..
Is the Magican Qtek s100 support the 256mb WiFi SD card.. ?
Sandisk says NO on my question to thre support .
Here is the answer below..
........................................................
Got this on my question from Sandisk about the s100 / wifi 256mb SD..
SanDisk Response: (12/20/2004 11:04)
Dear Joachim
Unfortunately, due to lack of Custom Bus Driver on your device (MOST HTC DEVICES), the unit will not support this card. We hope that your device manufacturer will soon come up with a fix on this issue.
We appologize for any inconviniences this may have caused you. We recommend that you use the SD WIFI CARD with no memory instead.
Kind Regards,
Sudhi K.
SanDisk Technical Support.
--------------------------------------------------------------------------------
Your Response: (12/21/2004 12:43)
Hi again .. Plz look at this URL: http://www.mtekk.com.au/forums/viewtopic.php?t=4630 Its a AU PocketPC forum. There is a guy that says it works. Are you completly sure that the WiFi 256mb one dont work in this new Qtek s100 / iMate Jam ?? Regards Joachim
--------------------------------------------------------------------------------
SanDisk Response: (12/21/2004 12:43)
Apparently this user has been able to get it to work. Our position is the same. The unit is not supported.
--------------------------------------------------------------------------------
Plz.. say they have it wrong .. or have they even tested..??
Carlis
Sandisk says NO
And I say YES (I'm posting with it just right now !!!!!)
It work great (WifiFofum found 20 wifi access point near my home , and +/- 80 access point on the road to my office )
Buy it, you won't regret !!!
Anything I need to do when I install it.. ?
Or just use the latest drivers from Sandisk ??
U can access the 256 mb onboard the WiFi card without any problem?
I feel the Qtek S100 realy need the extra mem on a SD card ..
Was soo sad when they told me it will not work...
Ur answer maked the day
Regards Joachim
I got no problems to access the memories
TNX Marcus..
Looks like I just have to buy me a "nonworking" Sandisk 256mb SD
I suppose if I send in photos of it in my qtek .. sandisk still says it isnt working ..
Regards.. Carlis
Bad Luck Carlis
please, do you use sandisk or socket drivers with your sandisk card ?
thank's
I use the driver provided with the card (sandisk)
But I will try the socket (i heard that they work better)
ok guys how about you put here your hardware thats working in BUZZmobile 2005 like
Working Hardware
1 -Sandisk 1GB SD card
2 -Jabra headset 250
3 -Siemans 32MB MMC card
4 -Pretec 128MMC card
it will be easy to get working hardware them....
what about the backpack
and the thumb keyboard and
other keyboards ?
SANDISK Wi-Fi
I've been playing around with the Sandisk Wi-Fi only card on WM2005 and I find the Sandisk 256MB+WiFi drivers work better than the standard ones as these support WPA security. However I am suffering from weird storage card issues and slowdowns due to the extra bit of the driver that handles the 256MB part of the card, which as we all know doesn't actually work on an XDA II anyway.
Would it be possible for someone to extract JUST the WiFi component of these drivers and leave out the 256MB storage driver component?
http://www.sandisk.com/retail/drivers-sdwsdb-256.asp
(using 2003 version)
Rudegar said:
other keyboards ?
Click to expand...
Click to collapse
i have universal irda keyboard sk6688 (try google) and it's working very good..
only problem is, that i can't turn off it's driver and turn it on, i lose backlight (softreset is a solution)
so socket wifi works in Buzzmobile
socket wifi works very well in Buzzmobile i received one for excanghe of a sandisk with memory
so one more to add
Working:
1gb PNY SD
1gb Sandisk SD
Pretec SD WLAN
Jabra BT800
Socket OEM BT GPS (black one)
Which drivers do you use rictec for your socket wi-fi card?
i think is the wifi smart phone version
i do think that it works great in socket buzzmobile its somewhere here
wm2005wifi.cab
I tried the Bluetooth Apple Pro Wireless Keyboard, it worked great.
Works in all apps, including desktop, the Apple key works like Windows key and brings up the start menu.
You can only pair the KB with one device by the look of it, so if you want to use it for your PC mainly (like me) then you have to re-pair with phone each time you want to send a sms or email via xda, a pain. But lets face it, your not going to carry the full KB everywhere are you!
I find it interesting that the KB worked so well though. Good to see WM2k5 support keyboard over bluetooth
Hi all,
I just upgraded my printer to a HP 2610 which has memory card slots and a network port. I was thinking that copying files to the memory card via the wired network might be quicker than copying to my XDA Exec over usb or wifi, but Im not seeing a speed improvement at all. :-(
Has anyone else tried this? Im copying 350meg files to my 2gig SD card and would like to know what would be the fastest way of doing this.
Many thanks
Nasdaq
I would use a card reader
Yeah I should buy one of those, I was just holding off as I knew my printer was about to pack up and thought that maybe the card readers on the printer might be up to the job.
Would you recommend any specific model?
Cheers
Nasdaq
I have got a Lexar 8-1, new ones nowadays are 12-in-1, and I am also using card reader at work which is built in the my HP PSC all in one printer. I also think that any will do, it is just a simple device.
Aria.co.uk have a tiny usb plug in card reader that doubles as a usb thumb drive. Very handy! I got mine a year ago and it works fine.
http://www.aria.co.uk/ProductInfoComm.asp?ID=16369 £5 inc VAT
I am sure your chosen supplier has somet similar
Nigel
Boost copying fast
You can contact your supplier through their Customer Support Hotline, or you can try what I use to boost transfer speeds. It's a common tool that we use at the office - GS RichCopy 360. Use it to transfer anything from files to documents to remote sites, servers, from point A to point B. Hope this helps you.
Has any one managed to use software like wm5torage or card export II with trinity? I tried both but they do not work for my device.
Doed any one know a way for them to work or another solution to use the storage card as a flash drive that works for HTC trinity?
I've the same problem and no solution. I can switch on my htc 3600 between card and active sync, but the card function doesn't work (card exportII ppc). No device under winxp????
I had same problem. Goto Start>settings>usb to PC and uncheck Enable advanced network functionality and that should fix the problem
Thanks, but it doesn't seem to have changed anything for me... still no removal drive appearing in Win XP after unchecking that option (tested again after soft reset, same result).
I rather using a usb 2.0 card reader, but when I tried WM5torage and Card Export, I remember both of them worked a couple of times, but for most of the times I tried to use them I got the same problem as you, I think Card Export didn't work or even complain, WM5torage returned some error message.
Another strange thing, when they did work, I had to use the device, i.e. press the start menu, open an application, for the transfer rate to become acceptable! really weird, if I just plug in the device and let it alone it was slow as hell to browse or do anything else.
So I decided to use one of these:
I have a USB mini SD card reader, unfortunately it doesn't seem to like 4go mini SD...
So I'm waiting to receive another reader that looks like yours... just hope it will read my cards (or are they capped to 2go?).
Anyway, I have at least one computer where I card read my card, so not a real problem... just wanted to be able to use it at work for example, and without ActiveSync that seems to corrupt the card...
Card Export II
Card Export II works well on my unit although after a reset it may take a little time till the Icon shows up. Also if you don't see your Mini-SD card in Windows just disconnect the USB cable, do a quick change from Card Export to Active Sync and back to Card Export then Windows will show you the MiniSd files.
Well after trying again and again, I've given up on using that kind of program...
Hopefully I've received the same usb card reader as Apoc and it work like a charm with my mini sd 4go
cedrick said:
Well after trying again and again, I've given up on using that kind of program...
Hopefully I've received the same usb card reader as Apoc and it work like a charm with my mini sd 4go
Click to expand...
Click to collapse
Maybe it's not working because your using a MiniSD 4GB (if that's what you wrote)...what brand/model are you using? is it working well??
For me WISBAR LITE was the problem!!!
I had to disable wisbar. Start wm5torage. activate it. restart wisbar.
now I can use (activate/stopp/restart) wm5torage without a problem.
(haven't done a reset yet)
I have always had problems with WM5torage telling me that something is still running on the card so can’t start. I check everything in processes and nothing appears to be pointing to the card, so without uninstalling one-by-one to find the conflicting culprit, I give up.
However Card Export II works great! Never had a problem with it connecting as a removable drive except with USB 1.1. I find if I connect to a PC with USB 1.1 it disables the USB altogether until a restart.
I’m using a 2Gb card, so either you are having problems with your 4Gb, or can I presume you are not using USB 2?
Also what have you formatted your 4Gb to? Fat32? What did you use to format with? You can get software like this especially to format SDHC.
I can put folders from my trinity on the pc but not from the PC en the trinity.
A hint:
I just bought A S300+ and tried WM5torage, I had a classic "maybe card is in use" problem. I already had patched rom and radio rom. So I tried to remove all protections with an official tool I know: Device Security Manager PowerToy for Windows Mobile 5.0 on microsoft website
Guess what ? it worked like a charm
Usage is very easy select "Security off" in selected configuration Compare with actual active sync device and then click 'provision'
Just disable the phone ...
See next thread. Cannot delete this one ...
Just disable radio ...
Just make sure you disabled the radio. I have some programs installed on the card (PB Weather) which are always active when the radio is on. If I disable the radio WMStorage works fine.
But you have to uncheck the extended option in the USB settings anyway.
Good luck
Christian
I used / tried both of this programs
last version of card export works great but not the previous one
WM5torage was working on different version of ROM
In the last I use, FAMAN 3.6, WM5torage is working fine.
in previous, 3.3 3.4 3.5, it wasn't. I had to do it with Card Export.
the driver used for handling memory card inside WM6 is the center of the problem
Card Export use its own driver, instead of WM5torage.
That's what I understood in some forums ...
So do some test on different version of ROM
good luck
PS : I use 4Gb Mini SDHC and I never install anything in the card to avoid any "actually in use" problems
I tried the last BETA version on WM5storage on FAMAN4.01 french WM6 rom and work like a charm
I just forgot to end my post ...
I also use WM5torage 1.78 beta 2 on FAMAN 3.6, and it is working very fine
I didn't try it on FAMAN 4.01 because I didn't keep this ROM version more than 1 hour.
The big advantage of WM5torage is it's freeware
Well, i have read all the posts and saw allot of people had problems with card, but mine is the most stupid ever, its a 2gb microSD with adapter and sometimes works, sometimes not, now i have put a sdhc driver and the funny thing it works like this, i remove my card it doesn't see it anymore but when i restart he see it almost every time, i do not get it, it does this on all os and all ipl/spl and radio roms... the card reader is clean now and without physical error, and the card is new and working perfect. Does anyone know how to fix this? if not lets try to fix this coul be useful for many... Thanks!
Closely resembling the HTC Magician, the device is a 2.75G phone with a 2.8" 240x320 touchscreen, a 2.0 Megapixel Digital Camera, Bluetooth 2.0 without EDR (equivalent to version 1.2 with additional bug fixes), WiFi 802.11b/g, Infrared Technology, Microsoft Push email access, 128 MB internal memory and a full sized SD card slot (no SDHC support). It is based on the Microsoft Windows Mobile 5.0 Professional platform, and was among the first Pocket PC phones to use the operating system. It has Microsoft Word, Excel and PowerPoint. The phone also includes Pocket Internet Explorer and Windows Media Player 10 Mobile as well as some carrier or provider specific
I have exactly the same problem lol like you .... who can i resolve this problem ?
HAHAHA is back and ok now i put a needle in contacts very slow in all and its ok now lets see what time the card reader resist