hello..
i have imate jam and i need two parts for it....
1.the internal rear plastic . with the 4 internal screws.
2. internal recorder button.
Where can i get thoose parts i need urgent help!!!
Thanks.
Related
If anyone needs parts for the 8125 or mda, PM me coz I've got lots of parts lying around from repairing some phones. I've got some 8125 casing and keyboard working. 2 Working Flexboard but one broken on earpiece and the other on lower buttons. 2 broken mainboard. 1 broken digitizer but the glass is ok. Lots of screws, 3 working camera lens, speakers, two working keyboard.
Here is a link to my threading history.
http://www.heatware.com/eval.php?id=41722
PM me if you want pictures or email me at [email protected]
i ve bought a new housing for my htc prophet , i-mate jamin, qtek s200
i am replacing the housing now, but i have a problem with touch screen
i tried the prophet without the front housing, it works
but when i assembly and screw them, touch screen dont work
please help anybody
i placed the pda to its original housing now everything fine,
touch screen working
what can be wrong with new housing?
any connectors on front?
Hi friends!
I have problem with my p3600.
I buy it with a non original white cover.
the problem is:when I touch some point of the cover in the lower part(where are IRDA and USB),or near Camera button or miniSD slot the display frizing and hen invert the normal color to negative.
I must disassembly the front cover? it's simple?
now is totaly faulty...please help me!
fix
if you can't open it or fix it then i guess you have to bring it to repair centre ....
Sorry to hear that
this is the link how to disassemble the p3600.
http://www.mediafire.com/?sharekey=34452e2a72b9645095af63b7d44918aa2ce35c49f0667641
hi guys i have 2 HTC 3600 devices and both is working only if i twist them to the left and if i they boot and works on today screen , and leave it ,,,the screen hangs ...
can you pls find solution for me ,?
i don t want loose 2 PPC ,,,
i don t know why both has same problem ,,, are these edition of HTC is not good quality\
pls help
i used many ROM ..even the Original form HTC ,, but i have the same result
The problem is the flex cable connection of the display or keypad to the motherboard.
Check if the display flexcable is well aligned and properly inserted into the motherboard slot.
Place a piece of paper or other soft material on the two connectors (display/ keypad) to improve the pressure from the back cover in these components.
Hi
i have been a unlucky owner of this handset as its screen was cracked and while replacing with a new one , the guy who were doing that accidently damaged the tiny microphone of my handset. they microphone was connected with the flex cable by a tiny ribon , now the ribon is cutted . vibrator and sensors and home button is working only the microphone is damaged. ANYONE please let me know can i just install a microphone or i have to buy entire bottom flex cable ?? please Help me
( i have uploaded a pic of microphone connector , please note that in my phone the microphone are torn disconnectd from main bottom flex cable )
sakibchy said:
Hi
i have been a unlucky owner of this handset as its screen was cracked and while replacing with a new one , the guy who were doing that accidently damaged the tiny microphone of my handset. they microphone was connected with the flex cable by a tiny ribon , now the ribon is cutted . vibrator and sensors and home button is working only the microphone is damaged. ANYONE please let me know can i just install a microphone or i have to buy entire bottom flex cable ?? please Help me
( i have uploaded a pic of microphone connector , please note that in my phone the microphone are torn disconnectd from main bottom flex cable )
Click to expand...
Click to collapse
I have the same problem, mic doesn`t work after a drop, I bought the flex cable of ebay, but I`m a bit confused on how to install it,
I follow some guides on you tube, but normally they require to remove the screen, and that would be very difficult not to break it,
Any help please?
sonci said:
I have the same problem, mic doesn`t work after a drop, I bought the flex cable of ebay, but I`m a bit confused on how to install it,
I follow some guides on you tube, but normally they require to remove the screen, and that would be very difficult not to break it,
Any help please?
Click to expand...
Click to collapse
use service manual, has details for dismantling http://forum.xda-developers.com/showthread.php?t=1709378