Hi,
i've successfully entered in bootloader mode
but i cannot start the sd boot uprade method.
I tried with 3 different 256 sd card, with different usb writer
and to plug or not the usb cable in the magician, but every time
nothing happens. It remain in serial or usb mode or if i soft reset the device reload the old rom.
There is a method or a command in romupgrade to force the sd boot? like d2s but with reverse function??
thanks
i finally did it ..
Try to take the procedure from the beggining ,
Store the current rom to the card (dont reset leave it as it is in bootloader mode it says store completed or something), instert it in the reader , load the old backup rom in sd (DONT COPY THE NEW HEADER OF THE NEW BACKUP ROM TO THE OLD BACKUP ROM) and then insert it in your phone , press the power button and reset , let it appear the splash screen (don't enter in the wizard after the splash screen) and then enter in bootloader mode (power , camera , reset ) and wait for a few seconds (it took 5 sec to me) and the it should appear the message press power to flash.
In conclusion , to those who restore from sd doesn't work , follow the above procedure , dont try only restoring begin from backup even you dont want this rom.
Related
I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13
Domin1992 said:
I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13
Click to expand...
Click to collapse
Hi Domin1992,
as stated above, you have mentioned that you performed a reset - was this a soft reset only with your stylus?
If you are unable to power on your phone at all, then there may be a possibility that you have a hardware issue (could be a problem with the motherboard circuit or battery).
How do you charge your phone? Via the mains adapter, or the USB link?
Try connecting your phone via your external power source using your mains charger or via USB cable and leave it for 2-3 hours and see if it picks up. (also look on device for indication of it receiving power by the lit LED).
If you have a charged battery insert it and power on the phone. If your phone doesn't have a hardware damage it should start. If it powers on (with the phone powered on, regardless of what's been displayed), then try performing a hard reset - especially if you cannot load the Manilla interface then i think you should try doing this. Also note that by performing a hard reset, you will lose all data stored in your phones RAM (this excludes data stored on your MicroSD card)
Regards.
After installation, device was doing reset after I clicked OK when device request me to do it.
When my device didn't want to load windows logo, I take out battery (device don't working without battery during is pluging to external power source) and I used stylus to reset.
I used to charge my device via mains adapter. You know it is USB link plugged to small box which is going to socket.
Today morning I pluged my device to external power source, and want to power on. After 10 minutes there is text.
"The device is unable to boot because either you have tourned off the device incorrectly or tried to install an application from untrusted source. Press Volume Up to rest your device or press your other button to cancel. This operation will delete all your personal data and restore the device to it's factory default settings."
Ok thats great, but i try to press Volume Up and I haven't reaction.
No one button isn't working.
I have to press this button once, 5sec or 10sec?
This is a hard reset. You should pres the button just once.
You should tell us if you can enter the bootloader,you used HSPL or USPL, this way someone could help you.
My opinion is that you should flash again using the card method.But for this to work you should have the HSPL and be able to enter bootloader.
So some more info would be good.
Good luck.
OK..
I have HSPL.
I downloaded bootloader from http://forum.xda-developers.com/showthread.php?t=347700
I set all what I should and press ok and than I see "USB port can not open".
I can't find card method for blackstone.
Ok.
It is simple enough.Just folow the next steps:
1. Download a rom that you like.
2. Rename the .nbh file to BLACIMG.nbh.
3. Copy BLACIMG.NBH into the root dir of your Storage Card.
4. Be sure to have at least 30% of charge.
5. Turn off your device by using the Power Button
6. Go to bootloader mode. Push and hold Vol Down + press Power button.
7. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
8. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Good luck and keep us posted.
Now I have problem with bootloader mode. I put in micro sd, turn on bootloader mode (poweron with volume down) and than in device I have
"Black100 32M
SPL-1.56.oliNex
MicroP-BlackStone (LED) v6"
on red-green-blue-white background
And for half second device show
"Loading!
No Image file"
Whats wrong?
2 Things:
1) Make sure you called the file BLACIMG
2) Make sure you place the file in the root of your SD card, not a folder.
Everything I did, how you told me. It isn't working still.
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
Excellent
Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
You are welcome. Glad that all is good.
Dear All
Sorry for bothering you all, I have search the net for a solution with no luck. Finally, I decide to post my problem here.
While I a upgrading my Athena 7500 from cooked rom to P4 rom, by mistake I removed the USB cable. I reconnect it but the PC said usb can’t be detected. I hard rest my phone. It showed the firs colored screen then went to white screen with the following messages
((Prewss ACTION to restore factory default
Press Camera key to xist))
When I press CameraKey its turn of
Then if I hard resut again and then I
pressed the ACTION. It shows “please white” for seconds. Then showed the following
((Restore default completed
Press Power key to boot
Press CommManager key to formate micro drive
))
If I go for any those option I will end with phone off(no light no screen)
When I connect my phone by USB with any PC is not detected it at all even as unknown device. When I put it in the charger no light indicated that it is charging.
I extract the NBH file from the orginal rom and but it in SD card (fat32 formated) and rename it as ATHEIMG.nbh . hard rest but the same result
How I could return back my Athena?
Thanks in advance
same thing but...
...happened to me, but I didnt flash any rom or radio or even changed bootloader...It was wrking fine one day, and next day it wont boot-up, screen not lit at all. It enters bootloader and I can hard-reset it, but no use...screen not lit and as far as I can see..it doesnt boot...when I connect it to the comp in bootloader it says USB...computer doesnt recognize it otherwise...when I turn on the device, only joystick lights green...as same as when its charging - then its red...
After that tried flashing from the card, connecting it to the MTTY, no use...
no reaction from any of the buttons, keyboard...it turns it self when I remove battery...any ideas?
Are you try Reboot from SD_Card... ???
how to reboot from SD Card? anyone can help me on this I have same problem...
thanks in Advance!
my imagio died, it turns on it shows the HTC logo and then just vibrates without stoping.
i downloaded the ROM for it and trying to flash it from the memory card...
Flashing device using Storage Card
Make sure your microSD is Formatted to fat32.
You don't have to delete all the files, but it's safer if you do.
Download your preferred Rom from the Imagio ROM Development Forum.
You may need to Un- zip / rar the file if the chef compressed it.
Make sure, your devices battery status is NOT LESS than 50%.
Go to the ROM's Folder and rename the .nbh file to WHITIMG.nbh
This may have already been done for you.
Copy the WHITIMG.nbh file to the root of your MicroSD Card
Insert MicroSD Card into the phone
Enter the phone's bootloader. Instructions:
Power down the phone.
While holding down the VOLUME DOWN button, Power the phone back on.
Continue holding the VOLUME DOWN button until the TRI-Colored screen shows up. At that time, release the button
Follow the On Screen instructions to start the update
Press the power button to flash the ROM to the device.
After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
i put it in boot mode it starts flashing and its stuck on - loading... for a while, like an hour. is that normal, how long does it take to flash it or am i doing something wrong.
tnx
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
yoseph1998 said:
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
Click to expand...
Click to collapse
Hi mate ,
Plan A
Go here
http://www.sammobile.com/firmwares/
Download an official stock rom flash with Odin , should be fine , no warranty problem
Plan B
Follow this:
http://forum.xda-developers.com/showpost.php?p=52256997&postcount=4657
I made that post for Omega rom I9500 but it should be fine for any rom of your choice
Get root method of your choice
Get the recovery of your choice
Follow procedures for above
Pull the externalSD card if you have it , if not buy one , copy into it ( pc or another phone) the custom rom of choice and flash......
yoseph1998 said:
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
Click to expand...
Click to collapse
You can't just use downloade mode in Ubuntu. You need to download Heimdall to use download mode. You can use this guide for flashin the stock rom.
http://forum.xda-developers.com/showthread.php?t=2317311
MAX 404 said:
Hi mate ,
Plan A
Go here
http://www.sammobile.com/firmwares/
Download an official stock rom flash with Odin , should be fine , no warranty problem
Plan B
Follow this:
http://forum.xda-developers.com/showpost.php?p=52256997&postcount=4657
I made that post for Omega rom I9500 but it should be fine for any rom of your choice
Get root method of your choice
Get the recovery of your choice
Follow procedures for above
Pull the externalSD card if you have it , if not buy one , copy into it ( pc or another phone) the custom rom of choice and flash......
Click to expand...
Click to collapse
for plan A, i am confused, should i put that in my sdcard, and open the recovery menu?
and for plan B, inorder for me to root my device i need to enable usb debugging, i cant do that, but will putting the phone in download mode and not enabelling usb debugging work?
yoseph1998 said:
for plan A, i am confused, should i put that in my sdcard, and open the recovery menu?
and for plan B, inorder for me to root my device i need to enable usb debugging, i cant do that, but will putting the phone in download mode and not enabelling usb debugging work?
Click to expand...
Click to collapse
Hi ,
Plan A
If for flashing stock rom , stock rom can only be flash by Odin
You need to be in download mode ( Turn off the Galaxy S4 and boot it into Download Mode by pressing and holding Volume Down, Home and Power buttons together. Once you see the Galaxy S4 Logo, release the Power button and continue holding the other two buttons. Click Volume Up to continue into Download Mode), have USB drivers installed in your PC , have the stock rom of choice in your PC ( what version you had before the problem?) and Odin program
See Odin Procedure
https://www.youtube.com/watch?v=bkonj2dICq8
Example of settings when flashing a stock rom
Country: Unknown
Version: Android 4.4.2
Changelist: 875187
Build date: Fri, 28 Feb 2014 12:23:39 +0000
Product Code: PNT
PDA: I9500UBUFNC1
CSC: I9500PNTFNC1
MODEM: I9500UBUFNA2
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Also read this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Plan B
No need for debbuging , you have to root ( using Odin) and you have to install a custom recovery ( using Odin) ...then after that you copy in your SDcard ( take SD card out , use your pc or other phone) the custom rom of choice , insert SD card again in your phone , enter recovery , go to the menu , choose install zip from SD card select custom rom and flash.
Either plan A or Plan B you do not have to enter in OS of the phone ( you cant anyway)
Read well all the threads before you do anything , you must be 100% clear , ask all the questions you need BUT read first until you have an idea of what you want to do
MAX 404 said:
Plan B
No need for debbuging , you have to root ( using Odin) and you have to install a custom recovery ( using Odin) ...then after that you copy in your SDcard ( take SD card out , use your pc or other phone) the custom rom of choice , insert SD card again in your phone , enter recovery , go to the menu , choose install zip from SD card select custom rom and flash.
Either plan A or Plan B you do not have to enter in OS of the phone ( you cant anyway)
Read well all the threads before you do anything , you must be 100% clear , ask all the questions you need BUT read first until you have an idea of what you want to do
Click to expand...
Click to collapse
Just a sidenote:
You don't need to root if you want to use a custom recovery. You can just flash the recovery and flash the rom you want.
Hi,
I'm not very experienced with those root things and followed a tutorial to do so.
I unlocked the bootloader, had TWRP installed and root. This worked. Now I wanted to remove Root and TWRP and go back to the original state. I couldn't find the stock recovery file, so I installed the P996A04V1.3.0B13_MR2_sd_ssl.zip via TWRP from the SD Card. Till here it worked. I could enter the stock recover and boot the phone.
Then Android wanted to install a security update. I allowed it and this is where the problem started.
The install process stood still on 25% for minutes. I thought it stuck and pressed and hold the power button to reboot that I can wipe the memory. But nothing happened. But the installation Process continued suddenly. I had the feeling that this power key worked like a skip key. So maybe it didn't install a file where it was stuck.
After the installation reached 100% the screen switched to black and nothing worked anymore. I couldn't restart the phone or anything but I think the phone was doing something cause it consumed electricity. When I checked the phone hours later I noticed it was empty.
I can reach the unlocked bootloader now, but none of the selections works. Doing nothing to boot or select Recovery lead to black screen and stuck. Then I have to wait until the battery is empty again. Fastboot, Power Off just restart the phone and I end in the Bootmenu again. I can't even fully charge the phone. As soon as it has enough power to start the Bootmenu appears. So I don't see the display of the charging process.
I don't understand how this could happen. I tried different key combinations when the phone had enough electricty to start. The phone always restarts and end in the bootmenu. Only when I press all three keys it's standing still on the ZTE Logo screen but as soon as I release the keys I end again in the bootmenu.
How can I force another Update?
regards
Let' start with the basic questions:
Do you have proper backup of your data?
Which Android Version did your Axon had before it went unusable?
You could try to reflash TWRP.
Boot your phone into bootmode.
Download a proper TWRP Image on your PC (https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547)
Open a cmd shell (press the windows key and type 'cmd' -> press enter)
Navigate to the folder where the TWRP Image is stored ('
Code:
cd C:\Users\[I]YOUR_USER_NAME[/I]\Downloads\
')
Type: '
HTML:
fastboot flash recovery [I]TWRP_IMG_NAME.img[/I]
'
Afterwards you could try to reboot into recovery mode.
I don't have a backup. But there isn't something imortant on the phone that I want to keep. I can do a full reset and reinstall, too.
Android must have been the latest offical availabe what's in the file. Was it Android 8? V1.3.0B13
The fastboot mode doesn't work. The screen turns black and the LED blinks red but only for a moment. Then the phone restarts and I'm in the bootmenu again. Windows doesn't recognize it as device.
Is there a way to force it to do an update from my SDCard without it needed to be connected to a PC?
Stevie123 said:
I don't have a backup. But there isn't something imortant on the phone that I want to keep. I can do a full reset and reinstall, too.
Android must have been the latest offical availabe what's in the file. Was it Android 8? V1.3.0B13
The fastboot mode doesn't work. The screen turns black and the LED blinks red but only for a moment. Then the phone restarts and I'm in the bootmenu again. Windows doesn't recognize it as device.
Is there a way to force it to do an update from my SDCard without it needed to be connected to a PC?
Click to expand...
Click to collapse
I don't know of any.
But you could boot into EDL Mode (Press and hold Both Volume button and then press the power button) and flash a Stock EDL rom from the Download Center i have linkd before.
It's not visible for the PC. The only thing I see is the charging screen when its total empty and you can't even boot as. As soon as it has enough power to switch to the normal screen the bootloader appears and when I do nothing the screen turns black and nothing happens. I don't even know if it is charging. The LED is off.
Follow this guide to unbrick it and then use MiFlash and flash an EDL ROM
https://forum.xda-developers.com/axon-7/how-to/salesmultidla2017-tool-to-unblick-dfu-t3854229