Hi !
I testing make Out of procces server on XDA II (MDA II) in eVc++4. I have problems
with this. If i called in client this :
IComMDA m_ComMda;
COleException m_Error;
if (m_ComMda.CreateDispatch(_T("ComMDA.Document"),&m_Error))
{
AfxMessageBox(_T("CreateDispatch - TRUE"),MB_OK,0);
return TRUE;
}
else
{
AfxMessageBox(_T("CreateDispatch - FALSE"),MB_OK,0);
return FALSE;
}
the error occur
==> CreateDispatch returning scode = severity: SEVERITY_ERROR, facility:
FACILITY_WIN32 ($800700C1).
IComMDA is class created from typelibrary :
class IComMDA : public COleDispatchDriver
{
public:
IComMDA() {} // Calls COleDispatchDriver default constructor
IComMDA(LPDISPATCH pDispatch) : COleDispatchDriver(pDispatch) {}
IComMDA(const IComMDA& dispatchSrc) : COleDispatchDriver(dispatchSrc) {}
// Attributes
public:
// Operations
public:
BOOL InitInterface();
};
interface is declared :
[ uuid(713B5595-EF1F-4961-A179-E374E0C82903), version(1.0) ]
library ComMDA
{
importlib("stdole32.tlb");
importlib("stdole2.tlb");
// Primary dispatch interface for CComMDADoc
[ uuid(901AD61B-9974-448a-9E79-7898E0C80FFE) ]
dispinterface IComMDA
{
properties:
// NOTE - ClassWizard will maintain property information here.
// Use extreme caution when editing this section.
//{{AFX_ODL_PROP(CComMDADoc)
//}}AFX_ODL_PROP
methods:
// NOTE - ClassWizard will maintain method information here.
// Use extreme caution when editing this section.
//{{AFX_ODL_METHOD(CComMDADoc)
[id(1)] boolean InitInterface();
//}}AFX_ODL_METHOD
};
// Class information for CComMDADoc
[ uuid(E523187A-FFB7-46e9-AA64-A6CB1BEAF9BB) ]
coclass Document
{
[default] dispinterface IComMDA;
};
//{{AFX_APPEND_ODL}}
//}}AFX_APPEND_ODL}}
};
Class is registered as :
CString strServerName;
CString strLocalServerName;
CString strLocalShortName;
CString strLocalFilterName;
CString strLocalFilterExt;
if (!m_pDocTemplate->GetDocString(strServerName,
CDocTemplate::regFileTypeId) || strServerName.IsEmpty())
{
return;
}
if (!m_pDocTemplate->GetDocString(strLocalServerName,
CDocTemplate::regFileTypeName))
strLocalServerName = strServerName; // use non-localized name
if (!m_pDocTemplate->GetDocString(strLocalShortName,
CDocTemplate::fileNewName))
strLocalShortName = strLocalServerName; // use long name
if (!m_pDocTemplate->GetDocString(strLocalFilterName,
CDocTemplate::filterName))
ASSERT(nAppType != OAT_DOC_OBJECT_SERVER);
if (!m_pDocTemplate->GetDocString(strLocalFilterExt,
CDocTemplate::filterExt))
ASSERT(nAppType != OAT_DOC_OBJECT_SERVER);
ASSERT(strServerName.Find(' ') == -1); // no spaces allowed
int nIconIndex = 0;
POSITION pos = AfxGetApp()->GetFirstDocTemplatePosition();
for (int nIndex = 1; pos != NULL; nIndex++)
{
CDocTemplate* pTemplate = AfxGetApp()->GetNextDocTemplate(pos);
if (pTemplate == m_pDocTemplate)
{
nIconIndex = nIndex;
pos = NULL; // set exit condition
}
}
BOOL bResult = FALSE;
if (TRUE)
{
// call global helper to modify system registry
// progid, shortname, and long name are all equal in this case
if (!(bResult = AfxOleRegisterServerClass(m_clsid, strServerName,
strLocalShortName, strLocalServerName, nAppType,
rglpszRegister, rglpszOverwrite, nIconIndex,
strLocalFilterName, strLocalFilterExt)))
{
// not fatal (don't fail just warn)
AfxMessageBox(AFX_IDP_FAILED_TO_AUTO_REGISTER);
}
}
else
{
bResult = AfxOleUnregisterServerClass(m_clsid, m_lpszProgID, m_lpszProgID,
m_lpszProgID, OAT_DISPATCH_OBJECT);
}
return;
------------------------------------------------
type library is registered as AfxOleRegisterTypeLib(AfxGetInstanceHandle(),
clsid);
where >// {713B5595-EF1F-4961-A179-E374E0C82903}
static const GUID clsid =
{ 0x713b5595, 0xef1f, 0x4961, { 0xa1, 0x79, 0xe3, 0x74, 0xe0, 0xc8, 0x29,
0x3 } };
Thanks for your help.
Hello,
I have written a DLL on eVC++. And now I want to use this DLL in a .NET program. But by "Add Reference" I got an error, that says:
This is not a .NET assembly.
So my question is, is it possible to using a eVC++ DLL on .NET?
If yes, what should I do, and if not, is there another way to do with this problem?
Thanks all
from http://www.csharphelp.com/archives/archive52.html
Code:
Call Unmanaged Code. Part 1 - Simple DLLImport
By Vyacheslav Biktagirov
Managed world is beautiful, I have all classes I want in FrameWork.. But what if I want call some unmanaged code? For instance, I have DLL written in C++, and want use it from C#.
Let's look some code. Our DLL exports some function, in CDecl convention, that sums two integers:
extern "C" __declspec(dllexport) __cdecl int sum(int a,int b);
And, of course, we want reuse this code in C#. We must recall, that it is no "direct" way to call unmanaged code, but we must inform the compiler, what we want to call, how, and where is needed code located.
[DllImport("TestDll.dll", EntryPoint="sum",
ExactSpelling=false,CallingConvention=CallingConvention.Cdecl)]
static extern int sum(int a,int b);
and now we can call it like normal C# function.
x=5;
y=7;
z=sum(x,y); // x will receive 12
Here is full C# client code - tested for Beta2.
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Runtime.InteropServices;
namespace WindowsApplication6
{
///
/// Summary description for Form1.
///
public class Form1 : System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.TextBox textBox1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.TextBox textBox2;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.TextBox textBox3;
///
/// Required designer variable.
///
private System.ComponentModel.Container components = null;
public Form1()
{
//
// Required for Windows Form Designer support
//
InitializeComponent();
//
// TODO: Add any constructor code after InitializeComponent call
//
}
///
/// Clean up any resources being used.
///
protected override void Dispose( bool disposing )
{
if( disposing )
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose( disposing );
}
#region Windows Form Designer generated code
///
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
///
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.textBox1 = new System.Windows.Forms.TextBox();
this.label1 = new System.Windows.Forms.Label();
this.textBox2 = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.textBox3 = new System.Windows.Forms.TextBox();
this.SuspendLayout();
//
// button1
//
this.button1.Location = new System.Drawing.Point(64, 192);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(144, 64);
this.button1.TabIndex = 0;
this.button1.Text = "call sum";
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// textBox1
//
this.textBox1.Location = new System.Drawing.Point(40, 120);
this.textBox1.Name = "textBox1";
this.textBox1.Size = new System.Drawing.Size(72, 22);
this.textBox1.TabIndex = 1;
this.textBox1.Text = "2";
//
// label1
//
this.label1.Location = new System.Drawing.Point(128, 128);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(16, 16);
this.label1.TabIndex = 2;
this.label1.Text = "+";
//
// textBox2
//
this.textBox2.Location = new System.Drawing.Point(152, 120);
this.textBox2.Name = "textBox2";
this.textBox2.Size = new System.Drawing.Size(56, 22);
this.textBox2.TabIndex = 3;
this.textBox2.Text = "3";
//
// label2
//
this.label2.Location = new System.Drawing.Point(224, 120);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(24, 23);
this.label2.TabIndex = 4;
this.label2.Text = "=";
//
// textBox3
//
this.textBox3.Location = new System.Drawing.Point(248, 120);
this.textBox3.Name = "textBox3";
this.textBox3.Size = new System.Drawing.Size(112, 22);
this.textBox3.TabIndex = 5;
this.textBox3.Text = "5";
//
// Form1
//
this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
this.ClientSize = new System.Drawing.Size(576, 322);
this.Controls.AddRange(new System.Windows.Forms.Control[] {this.textBox3,this.label2,this.textBox2,this.label1,this.textBox1,this.button1});
this.Name = "Form1";
this.Text = "Form1";
this.ResumeLayout(false);
}
#endregion
///
/// The main entry point for the application.
///
[STAThread]
static void Main()
{
Application.Run(new Form1());
}
#region My Code
#region Dll Imports
[DllImport("TestDll.dll", EntryPoint="sum",
ExactSpelling=false,CallingConvention=CallingConvention.Cdecl)]
static extern int sum(int a,int b);
#endregion
#region Button Click Events
private void button1_Click(object sender, System.EventArgs e)
{
textBox3.Text=(int.Parse(textBox1.Text)+int.Parse(textBox2.Text)).ToString();
}
#endregion
#endregion
}
}
It sounds very simple, becouse "int" is isomorphic type, says, int in C# and ind C++ is identical. What we can do, when we want operate non-isomorhic types, like String? Recall, that .NET string is some Class, while C++ string is char*,or wchar_t*,or BSTR, .. String may be embedded in a structure, or pointed by pointer, or even something more exotic. Let's call some string function.
[DllImport("Advapi32.dll", EntryPoint="GetUserName", ExactSpelling=false,
SetLastError=true)]
static extern bool GetUserName(
[MarshalAs(UnmanagedType.LPArray)] byte[] lpBuffer,
[MarshalAs(UnmanagedType.LPArray)] Int32[] nSize );
This function receives two parameters: char* and int*. Becouse we must allocate char* buffer and receive string by pointer, we can't use UnmanagedType.LPStr attribute, so we pass ANSI string as byte array. int* is more simple-it's 1-element Int32 array. Let's call it:
private void button2_Click(object sender, System.EventArgs e)
{
byte[] str=new byte[20];
Int32[] len=new Int32[1];
len[0]=20;
GetUserName(str,len);
MessageBox.Show(System.Text.Encoding.ASCII.GetString(str));
}
We allocate 20 bytes for receiving ANSI string,one element in Int32 array, set 20 as max string length and call it. For receiving string from byte array I used Text.Encoding.ASCII class.
I am presently writing a RegEdit program to run on my PC and allow editing of the registry on the connected PPC. I have got to the point where I can read the entire registry and I am now implementing function to update the registry i.e. insert new key, delete key, add new Key Values etc...
The problem I have at the moment is trying to add a new value to an existing key. The function I have written so far to do this is as follows, but the call to CeRegSetValueEx(...) returns an error code 5!
Code:
//-----------------------------------------------------------------------------------
// Adds a new key value into the registry.
// // TO DO - add the data
int CRegEditDoc::AddNewKeyValue(HTREEITEM hParent, HKEY hRoot, LPTSTR lpszKey, LPTSTR lpszValueName, DWORD dwType)
{
USES_CONVERSION;
int nItem, rc;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValueName = T2W(lpszValueName);
try
{
if (lstrlen (lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
CString strValue = "my data";
LPWSTR lpwszData = T2W(strValue);
DWORD length = dim(lpwszData);
nItem = m_pRightView->GetListCtrl().GetItemCount();
if (m_rapi.CeRegSetValueEx(hKey, lpwszValueName, 0, dwType, (LPBYTE)lpwszData, length*2) != ERROR_SUCCESS) // last 2 lpData, szie in bytes of data.
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
return 0;
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::AddNewKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
I would appreciate a little advise on the matter, as this is the first time I have used the RAPI.
Thanks.
Hi VZ800!
The error you're getting is 'access denied'. In WM5 many RAPI functions (including writing to registry) are blocked for security reasons. Your only choice is to use a dll with CeRapiInvoke functions, but it needs to be deployed through a special cab.
You can read about this on msdn.
By the way, the app you're writing already exists, and it has the same problem.
Good luck!
Thanks for the advice. Since my post I have found that my code works for the HKEY_LOCAL_MACHINE, "/Software".
I will investigate the issue you have pointed me to.
Actually, your code should work for the entire HKEY_CLASSES_ROOT as well. MS decided to block only certain 'sensitive' parts of the registry so they can not be corrupted from the outside by malicious software.
If you noticed, MS's own remote registry editor works through DLLs (a ton of them).
Any way, I skimped on words in my first post, since I was writing it on a bus, and while I love my Jamin, writing long text on it is not very enjoyable.
Let me elaborate on CeRapiInvoke:
It's a function you call on the PC side that receives a DLL name and a function name (in that DLL) as parameters and calls that function on the device. It also lets you transfer buffers of data to and from the called function.
It's a great way to communicate with a PPC device without using sockets. You can write the device side DLL to do what ever you wont (like access protected registry) and report back to the PC.
The only drawback is in WM5 this DLL has to be registered and have a 'system' file attribute set. That's why you have to deploy it by cab.
Like I said before it's all in the MSDN.
Hope this helps.
Thanks. I have read the articles (and printed them) about RAPI Restricted Mode Security etc... http://msdn.microsoft.com/library/d...5/html/wce51conRAPIRestrictedModeSecurity.asp and will write a DLL to go on the PPC which will be installed via CAB etc...
I updated the function to add a new value anyway. Rather than calling the RAPI functions for the registry CeRapi... I will call my own functions in my authorised DLL.
Code:
//-----------------------------------------------------------------------------------
// Adds a new key value into the registry.
//
int CRegEditDoc::AddNewKeyValue(HTREEITEM hParent, HKEY hRoot, LPTSTR lpszKey,
LPTSTR lpszValName, DWORD dwDType, LPBYTE lpData)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValName = T2W(lpszValName);
DWORD dwDSize = sizeof(lpData);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
// Check if valuename already exists. Should never happen, but just in case.
if (m_rapi.CeRegQueryValueEx(hKey, lpwszValName, 0, &dwDType, NULL, &dwDSize) == ERROR_SUCCESS)
{
AfxMessageBox(_T("Value of this name already exists!"));
return 0;
}
if (m_rapi.CeRegSetValueEx(hKey, lpwszValName, 0, dwDType, lpData, dwDSize) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to create new value for this key!\nPlease check access rights."));
return 0;
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::AddNewKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
A question on using the CeRapiInvoke function. Obviously my function that I will be invoking in my DLL will need to conform to the following footprint:
Code:
LPCWSTR, LPCWSTR, DWORD, BYTE*, DWORD*, BYTE**, IRAPIStream**, DWORD
What I would like to know is this: If I want my function to be a wrapper to say the
Code:
CeRegQueryValueEx(HKEY, LPWSTR, LPDWORD, LPDWORD, LPBYTE, LPDWORD)
function, how do I parse the function args? Please suggest how I would pack them into a BYTE* for the pInput parameter.
Actually, you got it a bit wrong:
Code:
FuncName(DWORD cbInput, BYTE *pInput, DWORD *pcbOutput, BYTE **ppOutput, IRAPIStream *ppIRAPIStream);
The prototype you specified is for the PC side (the first two strings are DLL name and function name);
I use the following parsing method:
Code:
BYTE* curInputPos = pInput;
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
memcpy((BYTE*)&dwIndex, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
memcpy((BYTE*)&Reserved, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
It works fine both ways.
Just don't forget to use LocalAlloc for inBuffer and LocalFree for outBuffer.
Thanks. I'll let you know how I get on.
So if I were to parse an HKEY and an LPTSTR accross I would do the following to put the data into a BYTE array:
Code:
DWORD dwIn, dwOut;
LPBYTE pInput;
PDWORD pOut;
dwIn = sizeof(HKEY) + (strlen(lpszKey)*sizeof(TCHAR));
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
memcpy(pInput, (BYTE*)&hKey, sizeof(HKEY));
pInput += sizeof(HKEY);
memcpy(pInput, (BYTE*)&lpszKey, strlen(lpszKey)*sizeof(TCHAR));
// move pointer back to begining.
pInput -= sizeof(HKEY);
Basically, yes but with two reservations:
1) I recommend using a different pointer for the current position in buffer, to avoid errors.
2) you need to put the string length in the byte array before the string, otherwise you won't know it's length on the device side. Alternatively, you have to add 1 to the length so the 0 byte at the end gets packed and you can use strlen on the device.
Also keep in mined that unless you define the PC side project to work with UNICODE libraries, THCHAR will be defined as char, while on the device it's always WCHAR.
I really apreciate your help. I still can't get my DLL function to work I keep getting error 1064!
This is my code for the DLL named REditSvr.dll:
Code:
#include <windows.h>
#ifdef __cplusplus
extern "C"
{
#endif
__declspec (dllexport) INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved);
#ifdef __cplusplus
}
#endif
BOOL WINAPI DllMain (HANDLE hinstDLL, DWORD dwReason, LPVOID lpvReserved)
{
return TRUE;
}
INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved)
{
INT rc = 0;
BYTE* curInputPos = pInput;
HKEY hKey;
DWORD dwLength;
// Copy args out of input buffer.
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
memcpy((BYTE*)&dwLength, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
// Allocate enough memory for local wchar.
LPWSTR lpszValueName = (WCHAR*)malloc(dwLength);
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(dwLength));
curInputPos += sizeof(dwLength);
// Do the registry delete.
rc = RegDeleteValue(hKey, lpszValueName);
// Allocate memory for the return buffer.
BYTE* pOutput = (BYTE*)LocalAlloc(LPTR, sizeof(long));
memcpy(pOutput, (BYTE*)rc, sizeof(long));
*ppOutput = pOutput;
*pcbOutput = sizeof(long);
// Free input buffer.
LocalFree(pInput);
// Free WCHAR
free(lpszValueName);
return GetLastError();
}
and this is the code in my PC application which invokes the above function (or I would hope it did):
Code:
//-----------------------------------------------------------------------------------
// Deletes the key value from the registry.
//
int CRegEditDoc::DeleteKeyValue(HKEY hRoot, LPCTSTR lpszKey, LPCTSTR lpszValName)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValName = T2W(lpszValName);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
/* if (m_rapi.CeRegDeleteValue(hKey, lpwszValName) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to delete value for this key!\nPlease check access rights."));
return 0;
}
*/
// Testing remote registry value deletion.
DWORD dwIn, dwOut;
LPBYTE pInput, pCurInputPos;
PDWORD pOut;
DWORD dwLength = wcslen(lpwszValName)*sizeof(WCHAR);
dwIn = sizeof(HKEY) + dwLength;
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
pCurInputPos = pInput;
memcpy(pCurInputPos, (BYTE*)&hKey, sizeof(HKEY));
pCurInputPos += sizeof(HKEY);
// Store the length of the string
memcpy(pCurInputPos, (BYTE*)&dwLength, sizeof(DWORD));
pCurInputPos += sizeof(DWORD);
memcpy(pCurInputPos, (BYTE*)&lpwszValName, dwLength);
HRESULT hr = m_rapi.CeRapiInvoke(L"REditSvr", L"RegEditDeleteValue", dwIn,
pInput, &dwOut, (PBYTE*)&pOut, NULL, 0);
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
LocalFree(pOut);
if (hKey != hRoot)
{
m_rapi.CeRegCloseKey(hKey);
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::DeleteKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
The DLL has been deployed to the PPC \Windows folder by eVC4. My PPC runs WM5 (is this the problem, although I have written programs with eVC4 ok for it).
I would again appreciate your help/advice on why this isn't working. At present I have unlocked my PPC and I am able to edit any part of the registry etc...
Hi VZ800!
I noticed a couple of errors in your code (which you may have corrected yourself by now) but the biggest problem, I think is that you don't register the dll.
Here is the part you missed from MSDN:
(full link: http://msdn.microsoft.com/library/d...en-us/mobilesdk5/html/mob5lrfcerapiinvoke.asp)
To satisfy the requirements of the Remote Access Security Policy
1. Create a provisioning XML document that adds the new node "RAPI" to the metabase. This node must include the absolute path to the *.DLL file. For more information, see Metabase Settings. The following code example shows the contents of a typical provisioning XML file.
<wap-provisioningdoc>
<characteristic type="Metabase">
<characteristic type="RAPI\Program Files\Green Sky\recaller.dll\*">
<parm name="rw-access" value="3"/>
<parm name="access-role" value="152"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
2. Pass the file name of the provisioning XML document to the CAB wizard using the /postxml command line option. The CAB wizard will append the XML to the _setup.xml file it places in the CAB. For more information on creating CAB files, see CAB Wizard.
3. Set the System attribute on the *.DLL file.
Only the Manager security role provides the required permissions for modifying the metabase. The ideal way to get this security role is to have your application signed with a privileged certificate.
Note Since Pocket PC implements a one-tier security model, the CAB install process will automatically have the Manager security role.
Click to expand...
Click to collapse
Here's my advice:
Create a simple function that doesn't receive parameters, but pops up a message on the device. When you see that calling it works, try adding the rest of the code.
Hi
As I understand the DLL does not require code to self- register. Anyway, I can call the DLL function and did as you suggested and put a MessageBox in the function. This displayed fine. My code for the DLL is as follows now:
Code:
#include <windows.h>
#ifdef __cplusplus
extern "C"
{
#endif
__declspec (dllexport) INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved);
#ifdef __cplusplus
}
#endif
BOOL WINAPI DllMain (HANDLE hinstDLL, DWORD dwReason, LPVOID lpvReserved)
{
return TRUE;
}
INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved)
{
DWORD rc = 0;
BYTE* curInputPos = pInput;
LPCWSTR lpszValueName;
HKEY hKey;
int len;
// Copy args out of input buffer.
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
// Size of value name string.
memcpy((BYTE*)&len, curInputPos, sizeof(int));
curInputPos += sizeof(int);
// Value name string.
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(len));
curInputPos += sizeof(len);
// Do the registry delete.
rc = RegDeleteValue(hKey, lpszValueName);
// Allocate memory for the return buffer.
*ppOutput = (BYTE*)LocalAlloc(LPTR, rc);
memcpy(*ppOutput, (BYTE*)&rc, sizeof(DWORD));
*pcbOutput = sizeof(DWORD);
// Free input buffer.
if (pInput)
LocalFree(pInput);
return GetLastError();
}
and this is the code from which I am calling it:
Code:
//-----------------------------------------------------------------------------------
// Deletes the key value from the registry.
//
int CRegEditDoc::DeleteKeyValue(HKEY hRoot, LPCTSTR lpszKey, LPCTSTR lpszValName)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPCWSTR lpwszValName = T2W(lpszValName);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
/* if (m_rapi.CeRegDeleteValue(hKey, lpwszValName) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to delete value for this key!\nPlease check access rights."));
return 0;
}
*/
// Testing remote registry value deletion.
DWORD dwIn, dwOut;
LPBYTE pInput, pCurInputPos;
PDWORD pOut, rc;
int len = wcslen(lpwszValName)*sizeof(WCHAR);
dwIn = sizeof(HKEY) + len;
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
pCurInputPos = pInput;
// Store the hKey value in the output buffer.
memcpy(pCurInputPos, (BYTE*)&hKey, sizeof(HKEY));
pCurInputPos += sizeof(HKEY);
// Store the length of the string in the output buffer.
memcpy(pCurInputPos, (BYTE*)&len, sizeof(int));
pCurInputPos += sizeof(int);
// Store the value name string in the output buffer.
memcpy(pCurInputPos, (BYTE*)&lpwszValName, len);
HRESULT hr = m_rapi.CeRapiInvoke(L"REditSvr", L"RegEditDeleteValue", dwIn,
pInput, &dwOut, (PBYTE*)&pOut, NULL, 0);
// HRESULT hr = RapiFuncTest(dwIn, pInput, &dwOut, (PBYTE*)&pOut, NULL);
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
if (dwOut)
{
memcpy((BYTE*)&rc, pOut, sizeof(DWORD));
}
if (pOut)
{
LocalFree(pOut);
}
if (hKey != hRoot)
{
m_rapi.CeRegCloseKey(hKey);
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::DeleteKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
As you can see in the DeleteKeyValue(...) function I called a test-function just to check that I was retrieving the data out of the pInput buffer ok, which I am.
I signed the DLL with the SDKSamplePrivDeveloper.pfx, added the /postxml via the /postxml switch in the cabwiz and successfully created a CAB file which installs the DLL into the \Windows folder on the PPC. The .inf file is as follows:
Code:
[CEStrings]
InstallDir=%CE2%
AppName="REditSvr"
[Strings]
CompanyName="AHartley"
[Version]
Signature="$Chicago$"
CESignature="$Windows CE$"
Provider=%CompanyName%
[SourceDisksNames.Arm]
1=,"arm files",,C:\eMDevelopment\PPCRegEdit\REditSvr\REL
[SourceDisksFiles.Arm]
REditSvr.dll=1
[Files.ARM]
REditSvr.dll
[DestinationDirs]
Files.Arm=,%InstallDir%
[DefaultInstall.Arm]
CopyFiles=Files.Arm
My PC side code invokes the DLL function return 0 as error code. But the error code returned in the ppOutput buffer is 0x00000057 Dec 87. Which equates to the error message "The parameter is incorrect."! Which must be a param of the RegDeleteValue(...) function, as if I comment this out I don't get any error return values!!
Any odeas?
This is all academic now as I won't be finishing the PPCRegEdit program coz of the Remote Registry Editor tool available in the eVC4 IDE, which I hadn't noticed before, duh. But I would like to know why the function isn't working as required.
You were writing this as a tool? :shock:
If you just asked, people would have told you about the existing reg edit and CeRegEdit witch works through RAPI directly.
Still, it is a nice exercise in coding which I done my self once (for other purposes)
Any way, your error is simple:
Code:
// Value name string.
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(len));
curInputPos += sizeof(len);
You are parsing it incorrectly.
This is how it should look:
Code:
// Value name string.
memcpy((BYTE*)lpszValueName, curInputPos, len);
curInputPos += len;
and on the PC side:
Code:
memcpy(pCurInputPos, (BYTE*)&lpwszValName, len);
should be:
Code:
memcpy(pCurInputPos, (BYTE*)lpwszValName, len);
once again, no offence but if you just read your code more carefully and use debug prints to check parameters, you won't need anyone's help.
Good luck in future projects.
(whoops, made an error my self while correcting another)
Yes, it is just an exercise.
Thanks for all your help. Sorry for the silly errors, I will try and take more care in future.
Save me from madness!!!
I have a several smartphone devices with windows CE
CE 6.0 - hp IPAQ 500 series
CE 5.0 - Samsung i600
I need to inject DLL into the process "home.exe". I use method with performcallback4 function. This method works successfully for all processes ("device.exe", "service.exe", etc.) except process "home.exe". In what a problem?
source code : InjectDLL.exe link with toolhelp.lib
#include <windows.h>
#include <Tlhelp32.h>
typedef struct _CALLBACKINFO {
HANDLE hProc;
FARPROC pfn;
PVOID pvArg0;
} CALLBACKINFO;
extern "C"
{
DWORD PerformCallBack4(CALLBACKINFO *pcbi,...);
LPVOID MapPtrToProcess(LPVOID lpv, HANDLE hProc);
BOOL SetKMode(BOOL fMode);
DWORD SetProcPermissions(DWORD newperms);
};
DWORD GetProcessId(WCHAR *wszProcessName)
{
HANDLE hTH= CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, 0);
PROCESSENTRY32 pe;
pe.dwSize= sizeof(PROCESSENTRY32);
DWORD PID=0;
if (Process32First(hTH, &pe))
{
do {
if (wcsicmp(wszProcessName, pe.szExeFile)==0)
{
PID=pe.th32ProcessID;
}
} while (Process32Next(hTH, &pe));
}
CloseToolhelp32Snapshot(hTH);
return PID;
}
HMODULE GetDllHandle(DWORD ProcessId,WCHAR* ModuleName)
{
HANDLE ToolHelp=CreateToolhelp32Snapshot(TH32CS_SNAPMODULE,ProcessId);
if (ToolHelp!=INVALID_HANDLE_VALUE)
{
MODULEENTRY32 ModuleEntry={sizeof MODULEENTRY32};
if (Module32First(ToolHelp,&ModuleEntry))
do
{
if (wcsicmp(ModuleEntry.szModule, ModuleName)==0)
return ModuleEntry.hModule;
}
while(Module32Next(ToolHelp,&ModuleEntry));
CloseToolhelp32Snapshot(ToolHelp);
}
return NULL;
}
BOOL InjectDll(WCHAR* ProcessName,WCHAR* ModuleName)
{
DWORD ProcessId=GetProcessId(ProcessName);
HMODULE ModuleHandle=GetDllHandle(ProcessId,ModuleName);
if (ModuleHandle!=NULL)
return TRUE;
HANDLE Process=OpenProcess(0,0,ProcessId);
if (Process==NULL)
return FALSE;
void* ModuleNamePtr=MapPtrToProcess(ModuleName,GetCurrentProcess());
if (ModuleNamePtr==NULL)
return FALSE;
CALLBACKINFO ci;
ci.hProc=Process;
void* LoadLibraryPtr=MapPtrToProcess(GetProcAddress(GetModuleHandle(L"coredll.dll"),L"LoadLibraryW"),Process);
if (LoadLibraryPtr==NULL)
return FALSE;
ci.pfn=(FARPROC)LoadLibraryPtr;
ci.pvArg0=ModuleNamePtr;
PerformCallBack4(&ci); in this place process exit. visual studio output message : "process exit with code 0xc0000030"
Sleep(500);
CloseHandle(Process);
return GetDllHandle(ProcessId,ModuleName)!=NULL;
}
extern "C"
{
BOOL SetKMode(BOOL fMode);
DWORD SetProcPermissions(DWORD newperms);
};
#define DLLNAME L"MyDll.dll"
int WINAPI WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance,LPWSTR lpCmdLine,int nShowCmd)
{
WCHAR Path[MAX_PATH];
GetModuleFileName(NULL,Path,MAX_PATH);
wcscpy(wcsrchr(Path,L'\\')+1,DLLNAME);
WCHAR NewPath[MAX_PATH]=L"\\Windows\\";
wcscat(NewPath,DLLNAME);
CopyFile(Path,NewPath,FALSE);
BOOL Res=InjectDll(L"home.exe",L"MyDll.dll");
return 0;
}
the error code is
#define STATUS_INVALID_PARAMETER_MIX 0xC0000030
(maybe too fast for getting the thread infos?)
try to make the "Sleep(500);" before "PerformCallBack4(&ci);"
I have tried, a problem not in it. Any ideas?
I have not found the reason.... I Use other method without performcallback4
Problem with injection dll to cprog.exe process?
I want to inject dll to cprog.exe process. but it doesn't work.
source code.
Code:
VOID
InjectDllToCprog()
{
WCHAR DllPath[MAX_PATH] = L"";
CallbackInfo ci;
GetModuleFileName(NULL, DllPath, MAX_PATH);
PWCHAR p = wcsrchr(DllPath, L'\\');
DllPath[p - DllPath] = '\0';
wcscat(DllPath, L"\\CprogInject.dll");
ZeroMemory(&ci, sizeof(ci));
g_hCprog = FindCprogProcess(L"Cprog.exe"); // the handle is right.
if(g_hCprog != NULL)
{
DWORD dwMode = SetKMode(TRUE);
DWORD dwPerm = SetProcPermissions(0xFFFFFFFF);
FARPROC pFunc = GetProcAddress(GetModuleHandle(L"Coredll.dll"), L"LoadLibraryW");
ci.ProcId = (HANDLE)g_hCprog;
ci.pFunc = (FARPROC)MapPtrToProcess(pFunc, g_hCprog);
ci.pvArg0 = MapPtrToProcess(DllPath, GetCurrentProcess());
g_InjectCprog = (HINSTANCE)PerformCallBack4(&ci, 0, 0, 0);
if(GetLastError() != 0) // GetLastError() = 5
DbgError(L"PerformCallBack 执行失败", GetLastError());
SetKMode(dwMode);
SetProcPermissions(dwPerm);
}
}
GetLastError() return 0x00000005(Access is denied)
Anyone can help me? Sorry for my poor english.
Hello everyone,
This topic is not new however i never see any thread that has the solution for WM6. In my case, i want to create an smartphone app send AT Command to the gsm modem of my HTC HD.
Apparently there's no port COM2 or COM9 open in the device (everytime i tried CreateFile there's error 55, i also checked in the active device registry, no COM2 or COM9), so i use RIL_Initialize and RIL_GetSerialPortHandle to get the port. The openning and writing steps works very well, however there's no data in return, seems that the modem doesn't respond.
Below is the code:
Code:
RIL_Initialize(1,
ResultCallback,
NotifyCallback,
dwNotifications,
dwParam,
&RilHandle);
HANDLE hCom = NULL;
char * xpos;
char rsltstr[5];
DWORD returnValue;
DWORD LAC;
DWORD CellId;
int bufpos;
DCB dcb;
COMMTIMEOUTS to;
DWORD nWritten;
DWORD event1;
DWORD nRead;
char outbuf[20], buf[256];
BYTE comdevcmd[2]= {0x84, 0x00};
GetSerialPortHandleResult = RIL_GetSerialPortHandle(RilHandle,&hCom);
if (FAILED(GetSerialPortHandleResult))
{
TCHAR szString[256];
wsprintf(szString, L"Error GetSerialPortHandle, result= %d",GetSerialPortHandleResult);
MessageBox(NULL, szString, L"Error", MB_OK | MB_ICONERROR);
return 0;
}
if (hCom==NULL || hCom==INVALID_HANDLE_VALUE)
{
TCHAR szBuf[80];
DWORD dw = GetLastError();
// get the most uptodate cells
_stprintf(szBuf, TEXT("CreateFile failed with error %d."), dw);
MessageBox(0, szBuf, TEXT("Error"), MB_OK);
hCom= NULL;
return -1;
}
if (!GetCommState(hCom, &dcb))
{
return -2;
}
dcb.BaudRate= CBR_115200;
dcb.ByteSize= 8;
dcb.fParity= false;
dcb.StopBits= ONESTOPBIT;
if (!SetCommState(hCom, &dcb))
{
return -3;
}
if (!EscapeCommFunction(hCom, SETDTR))
{
return -4;
}
if (!GetCommTimeouts(hCom, &to))
{
return -6;
}
to.ReadIntervalTimeout= 0;
to.ReadTotalTimeoutConstant= 200;
to.ReadTotalTimeoutMultiplier= 0;
to.WriteTotalTimeoutConstant= 20000;
to.WriteTotalTimeoutMultiplier= 0;
if (!SetCommTimeouts(hCom, &to))
{
return -7;
}
if (!SetCommMask(hCom, EV_RXCHAR))
{
return -8;
}
if (!DeviceIoControl (hCom,0xAAAA5679L, comdevcmd,sizeof(comdevcmd),0,0,0,0))
{
TCHAR szBuf[80];
DWORD dw = GetLastError();
// get the most uptodate cells
_stprintf(szBuf, TEXT("DeviceIoControl failed with error %d."), dw);
MessageBox(NULL,szBuf, TEXT("Error"), MB_OK);
return -9;
}
bufpos = 0;
strcpy(outbuf,"AT+creg=2\r");
if (!WriteFile(hCom, outbuf, strlen(outbuf), &nWritten, NULL))
{
return -10;
}
if (nWritten != strlen(outbuf))
{
return -11;
}
/*if (!WaitCommEvent(hCom, &event1, NULL)) // ALWAYS BLOCKED !!!
{
return -12;
}*/Sleep(500);
while(1)
{
if (!ReadFile(hCom, buf+bufpos, 256 - bufpos, &nRead, NULL))
{
return -13;
}
if (nRead == 0) // ALWAYS BREAKS !!!
break;
bufpos += nRead;
if (bufpos >= 256)
break;
}
strcpy(outbuf,"AT+creg?\r");
... // Continue to write and read
As i said above, there's no return error, just that the buffer read is empty...
Any ideas ?
Thanks!
I don't know why it always gets nRead = 0, all the other steps work very well, no error return ...
I saw several discussions about this, so i do believe that someone have tried once this dev in WM5 or 6...
Therefore could anyone please share some point ?
no one has an idea ?
There's something a little bit interesting that i found out directly in the memory.
There's a sequence of responses to AT Command writing in ASCII:
@HTCCSQ:3
@HTCCSQ:4
@HTCCSQ:2
+CREG: 1,"000C","9F60" (here we has current LAC + Cell ID)
+CREG: 1,"000C","9BC7" (another LAC + Cell ID, i think it's the previous one)
+COPS: 0,2,"20820",3 (inside the "" are MCC MNC)
@HTCCSQ:3 .... (there's plenty of @HTCCSQ: coming next )
Look like some kind of log of the querries of RIL driver to the modem (i'm not sure)
So i think the gsm modem is available for answering to the commands, just haven't figured out how to make a stream connection to it (in WM6).
Any ideas ?
Thanks.
TAPI
I heard somewhere that we can use TAPI to send some AT Command, my question is to know if we can send a custom command (for example AT+CCED) by using TAPI ?
hi,I met the same problem.Do you find the answer?
Thanks.