Hi @ll,
i like to get some information about how i can disable the sd-slot at a mda II or xda II by software. Maybe some of you can give me a hand.
The problem i have is the following:
i'm scanning the area around for wireless lan's by using a sd-wlan-device (SanDisk SDWSDB-000). After getting the SSID's of available WLAN's, i try to establish a GPRS connection to transfer the SSID-information.
The problem the MDA II brings in is based on one single I/O-controller. (based on a T-Model technical report) The MDA doesn't allow to use GPRS and WLAN (sd-slot) at the same time.
What i'm looking for is a piece of source code that make it possilbe to disable the sd-slot by software and restart it later.
Does anyone can help me or give me an advise?
Greetings,
Mike
Hi Pure_logic, look at this.....
http://personales.ya.com/webpages/TodayWarrior/English.htm
Saludos al Foro 8)
thx for the answer, maybe can help me, i will take a deep look.
Related
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
you have an o2 XDA II or an Imate or a MDA II?
andygee said:
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
Click to expand...
Click to collapse
I dont have any other known answer to that to fix it but there's a program on PocketGear.com called GPRS Keep Alive. $2.45 to buy it and there's a trial too so give it a try.
Her's the link incase you want it:
http://pocketgear.com/software_detail.asp?id=12673
But if you guys have alternate fix let us know, pls.
Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,
hi everyone!
i've seen the same post ealier (~4 weeks ago) but don't found decision in there. So asking for again if somebody already found it.
Problem:
I use JAM as a GPRS modem via bluetooth. After voice call receiving JAM close both bluetooth and GPRS connection. So to contnue my work i have to reconnect manually from laptop
Before JAM i've used different phones by SonyEricsson (from T39) for over 4 years and hadnt never meet with this problem.
I've tried to find somethin that may help to decide this prob in GPRS and bluetooth settings of JAM but nothing
and one more questions:
is any software instead of standart WModem, witch always on and ready to connection without any manual operations like starting Wmodem. Soft making my JAM featured as any simple _ordinary_ phone like SE T610 for example?
thanx in advance for your answers (and sorry for bad english
hi all,
i have just bought a new O2 Exec.. I was wondering what software/tweaks you guys recommend.
Regards,
frz
i also just have my dopod 900, similar to o2 exec and i still dont know what to install. I saw something about AKU2 or AKU3 on the forum but dont know where to download, can someone please advice/help us as my device was sometimes cannot received data signal while connecting to internet.
I just download TCPMP player to the device and it was a great staff to play with and I will not use the WMP for movie/tv.
Guys, I've just bought myself a new suit.
Would you like to come over and try it on for me?
Come on - a little work on your side will be necessary, and searching is the best way to show that you've tried.
Have a read through this thread for guidelines on using the board:
http://forum.xda-developers.com/viewtopic.php?t=4534
And then have a look here for a starter:
http://forum.xda-developers.com/viewtopic.php?t=32698&start=0&postdays=0&postorder=asc&highlight=
AKU stuff - get started slowly before you start modifying the OS too much, as a lot of the stuff on the board can make your system unstable if used incorrectly. Configure your basics, get yourself some good backup software, and then check out the wiki and the ftp.
Most of the newer roms will have some AKU support already in, I think.
V
Thanks a lot bro Vijay555. Will try to surf now and get more info.
danlee: as a friend from Malaysia, you might want to check out my buddies on www.ppcsg.com and www.gadget.sg
V
Danlee....
Just out of curiosity....how much is internet connectivity in M'sia?
I'm planning on coming home during the CNY and would like to use the service if it's not too expensive.
Would you mind posting the cost of the internet connection and who the provider is?
Will it be available prepaid?
Thanks.
Fellow M'sian in US.
To vijay555,
Thanks a lot but i cant do downdoading now cause i am on GPRS connection now. But i will visit your site when i got back home.
To Moden man,
The cost for GPRS connection will be 1 cent for 1kb. You can only use 3G in KL area. You can access by using DiGi, Celcom and Maxis as your service provider.
Hi guys,
whenever i try to connect my imate kjam (wizard,Qtek 9100,MDA Vario, O2 XDA Mini S, SPV M3000, Cingular 8125, T-Mobile MDA, Dopod 838, VPA compact II etc) to my university's wlan, my pda tells me that it is unable to resolve ip. Um perhaps it says unable to find ip, im not sure, i'll check again this arvo and return with my answer.
My uni claims that their system is pda compliant which makes me think that one of my connection settings are wrong.
Before you flame away, i have searched many many threads for this thread using keywords such as wifi, wlan, unable, ip etc, but was unable to find any solution that i havent tried already. Do feel free to offer your advice.
I have a g4 cid-locked wizard running wm6, though i have experimented with a few other roms, but they all offer the same problem.
If anybody has any suggestions i hope you feel free to flame away or kick me in the bum in the direction of where i might find a solution to this problem. If im lacking any info in this post then do feel free to remind me and i'll edit it later.
Thanks guys
problem solved.
How did you solve it?
bwesty said:
problem solved.
Click to expand...
Click to collapse
Just for the sake of learning, would you please tell the community what was causing the problem and how did you solve it?
Hello,
I have a T moblie compact III, if I un-lock the CID can I flash a new ROM of wm6 and get wifi working ?
If so could you point me at where and how to find the ROM's
Thanks for any help
Martyn
Only one chance how to make WiFi working on T-MO Mda C3 is to buy microSD-IO wifi card( if any exist - i doubt) unless You have one of the first from Netherlands. There is no WiFi chip inside MDA C3. (you can say thans to T-Mobile)
thanks !
I though T moblie would not want there user's installing skype and chatting for free.....
How can I tell if its got the wifi chip set? I have had it for about a year
thanks martyn