I tried to use Wifi in a cafe, the wireless lan manager show connected to network, buy when i open IE, my PDA always trying to connect with GPRS service. the wifi seems not working, and i could not open a web page.
could some one tell me what should i do :idea:
try picking another network in
system connections connections advanted
pick something other then my isp or what ever the gprs connection is called
hi! thx for reply
i tried today in starbucks, but the GPRS seems still comes up, i picked up my work network, tap edit, there are only three option, 1, auto pick 2, O2 active
3, WAP network
when i open IE, it always inform me, connect to O2 active, then Dialed: Then answering modem has disconnected. To check your connection setting and change them if needed, tap setting.
the wifi connection is realy confuse me, dose any one know how to connect to internet in a cafe or airport??
When you've got wifi enabled make sure that Settings->Connections->Network Cards has My Network Card connects to "The Internet".
Hey,
I'm using a Qtek 2020i which I believe is the same as a xdaIIi. I have a wireless network set up at home and have managed to connect to it with the built-in Wlan device in my Qtek but every time I try to connect to the internet or send/receive emails it tries to connect to gprs even though it shows wifi is connected.
I have read some of the other forum posts here and many of them say to check that my network card is set to connect to the internet however where it says 'my network card connects to' there is only a blank box after it - no option to choose work or internet??
Has anyone got any advice on how to resolve this issue.
Thanks in avdance.
system->Connections->Connections->advanced
and pick the connection of your cellphone isp as the connection for
programs which use internet access
that is already the case so it can't be that I'm afraid
I am having the same problem with my MDA Vario(KJam).
It tries to connect to GPRS even if i have wireless lan connected
anyone know how i can sort this
thanks
As noted in another post, simply creating a dummy gprs connection created a default conne tion instead of the telco gprs.
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
I ahve the same problem and have not figured out how to solve this...
Can anyone help us?
same problem here, also with t-mobile as provider. can it be a problem related to t-mobile???
me said:
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Also, make sure your GPRS Connection settings aren't setup to use T-Mobile's proxy. When your gprs is setup to use a proxy for web browsing, PIE will attempt to use the proxy with any connection. And by proxy, I'm not talking about an APN or anything.
Are you running security on your router? If so try shutting it off to test or try to connect to someone elses WiFi network to test.
wagz said:
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Click to expand...
Click to collapse
I spoke with a TMob customer service rep about this a couple weeks ago, and this is basically what he told me to do. A T-Mobile HotSpot (Starbucks, etc) should work without making any changes. But if you want to use your own WiFi connection, you have to do the following:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change first dropdown to "My Work Network".
Click OK, OK.
Then when you want to roam with GPRS/EDGE again, you have to change it back to "T-Mobile GPRS".
Very annoying to say the least. If anyone knows a better way to do this, I'd love to hear about it.
This works for me:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Make sure My Work Network is set to connect to the internet, but has NO proxy settings.
Make sure T-Mobile GRPS is set to connect to the internet, but HAS proxy settings.
Magic!
frycow, you rock!!
That worked perfectly!! I hated that I had to keep switching networks whenever I wanted to go online via GPRS or wifi!!
Thanks!!!
frycow,
wow. that sounds great. but I can't get it working. could you take a couple minutes to walk me (and I'm sure others too) through your exact settings? especially the proxy settings.
thanks!
frycow is a freakin champ....that did the trick!! I've been WAITING to get this working!!
AHHHH, AND IT FINALLY GOT MY POCKET MSN TO START WORKING TOO!!!! Still doesn't work on GPRS, but it certainly works on Wi-Fi!! I suppose the last thing would be to get it working on both!! regardless, this is SWEET!!
I can´t get it working :evil:
When I Change the first dropdown to My Work Network and after that tryn to sync without having wifi enabled, the device does not connect with GPRS..., solutions...
frycow, hazchem, djswivel:
Could one of you help out Paltkugen and I? Both of us can't get it working. If you could let us know the specific settings, including the proxy settings, I would really appreciate it. Its so frustrating to know it works for some people, but not being able to get it going.
Thanks!
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
djswivel said:
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
Click to expand...
Click to collapse
That is exactly what I did too. Just tried it again and I can't use GPRS to surf. I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Could the proxy server not be working right for me? Is it possible that I cannot locate the proxy because I'm configured in a non-standard way (with a different access point - internet3) than most?
I think I'll call tmo and see if I can get changed to the regular AP (wap). I'm not using VPN stuff right now anyway. If anyone has other ideas, please let me know.
Thanks again!
I think i have a work around. but involes changing it back and forth when switching btwn wifi and gprs..
created two connections.
one with proxy and one without.
im only able to surf gprs with proxy.
when connecting via GPRS set both networks to connect to PROXY.
when using WiFi, set both networks to connect using NOPROXY.
that should work. at least it worked for me. tried only 2 pages and it loaded for both. GPRS used myvoicestream and wifi google.
yowzator said:
I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Click to expand...
Click to collapse
Earlier today I had been trying to get VM Net Browser or Resco File Explorer to work, and they *were* working, albeit very sporadically. Sometimes I could see whole windows network complete with shared files and directories, other times I could browse to my computer and it wouldn't show anything as being shared. Looking for a solution, i found this thread.
I followed the recommendations of the previous posts and got exactly the same results as yowzator, including the weird thing with the "This network connects to the internet" checkbox unchecking. My GPRS access point is also named wap.voicestream.com - not sure if that matters.
However, I know that I was having at least partial wi-fi success before trying this fix or I wouldn't be able to have seen my home network. So I gave up on this fix and put everything back to the default - GPRS for programs that automatically connect to the internet, no proxy, and My Work Network for programs that automatically connect toa private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
I tried surfing around to a few pages with wifi only (connections shows me connected to my network, I turned off the phone icon in the comm settings, and tapping on the connectivity icon on the taskbar didn't have GPRS listed) and amazingly, some of them worked - though the "locating" process seemed to take a while, they sometimes seemed to load faster than with GPRS (especially if I let my MDA go to sleep and then turn it back on again).
And then they don't work again, without me doing anything. So I don't think the fix we've been trying is a true fix to the problem - if it was then then pages would *never* load with the proxy disabled. Right?
I've been wondering if the "modem" tab under My Work Network is supposed to be blank . . . even if it's using wifi it seems like a poor UI design to not have a checkbox or something saying "this connection is for wifi and not dialup".
I am using the 2.17 ROM update. My wireless router is a D-link DI-624 extreme g. I'm using WEP encryption.
I am crying . . . tears . . . of confusion.
SOLUTION!?
This works for me (suggested in another thread):
1. Add the following to the registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
(Note that there is already a key in the registry called "HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: DWORD dot11SupportedRateMask=1" - you should leave this alone)
2. Do a soft reset.
3. Go to your wi-fi settings -> Power Mode tab -> Best Performance (without this step it didn't work for me)
4. Turn on wi-fi and connect to anything in internet explorer. It should seem blazing fast compared to GPRS.
Note that this assumes you haven't done any of the fixes in this thread. That is to say, leave it with GPRS for programs that automatically connect to the internet (with no proxy), and My Work Network for programs that automatically connect to a private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
So far (for a few minutes anyway) this is working for me! Even Resco File Explorer seems to mostly work - I can map my PC's shared folders and see my stuff reliably, as far as I can tell. VM Net Browser is still wonky though.
The thread this solution comes from is http://forum.xda-developers.com/viewtopic.php?t=38898&start=0&postdays=0&postorder=asc
Hi,
tried that solution
(I have a thread below)
still falls over on "locate".
I have no home network so I have never got anything working - connects fine on a public hotspot, but as I say, fails on locate.
I've had enough - may either phone T-mobile pay CS - something I really don't want to do out of principle - or just send teh phone back.
any new info on this? can seem to get it to work.
i have configures it many ways as suggested above. only time i was able to browse on wifi was with no proxie was set up. i connect through another network, (the mda automatically hooks you up to all avalible networks) but that only lasted a few minutes.
is there even a chance i could someone at tmobile even help me??? anyone here call them and get got service/help with getting it to work?
thanks
skot
Hi guys. once more I'm trying to find whats preventing my email account to connect using the wifi connection. It seems as it will only connect through 3g data connection. I've tried everything. the only thing I can think of now is that there's a problem with the wifi modem driver because as you can see in the pic below it wont appear as a modem connection:
can anyone check is they have another option there that I dont?
It'd be very appriciated. Thanks!
i face the same problem, I couldnt send email using wifi except 3G.
Well than lets find out whats wrong! Do you have those same options like I have?
I think that people that have a working email client should have another option there for the broadcom etherenet card and I want to compare.
Why are you going so "deep" in the "useless" settings?
Set your network cards to connect to "the internet", not "work", and set the email client to use "the internet"... and everything will work together nicely.
It does not work that way. When I send/recieve I get this messege:
Cannot connect
Dialed:
The answering modem has disconnected. To check your modem connection settings and change them if needed, tap settings.
Bump.
Cant someone just look and tell me wheter he has the same options like the pic in the first post? maybe he has diffrent/more options?
yosi199 said:
It does not work that way. When I send/recieve I get this messege:
Cannot connect
Dialed:
The answering modem has disconnected. To check your modem connection settings and change them if needed, tap settings.
Click to expand...
Click to collapse
That would mean your 3G connection doesn't work either... but you did say it was working earlier, right?
I'm on WM 6.5 and the screen is different. But in the options I only have 3, Bluetooth is absent.
BUT that screen is not related to wifi at all, so your problem should not be there.
This connection screen is set by the configurator for your country/operator to get the data/mms connection settings. If those work, the problem is somewhere else.
If it helps .... I only have the 3 options you have. BUT I am pretty sure that the screen shot you showed has nothing to do with your ability (or inability in this case) to establish a wifi connection.
I re-set up my Telstra WAP connection and then my Active Sync settings in order to connect to Exchange as it did not connect straight out of the box (gotta love Telstra!) but all is working now that I have selected "The Internet" and have the right Telstra settings ....
Sorry I cant help anymore ... hope you find a solution though!
yosi199 said:
It does not work that way. When I send/recieve I get this messege:
Cannot connect
Dialed:
The answering modem has disconnected. To check your modem connection settings and change them if needed, tap settings.
Click to expand...
Click to collapse
I had the same problem last night at home, and quick resolution was to reset the WiFi access point. I know for a fact that it's not the HD2 because occasionally I had the same problem with my old phone (Nokia E60).
However, I too was puzzled by the message you are quoting. If WiFi does not work, the HD2 should fall back on 3G / GPRS / GSM, which in this case it does not.
I'm not sure whether your problem too may be related to the access point. If I were you I would:
a) Turn WiFi off on the HD2 and check that mail works fine;
b) Check that you have set your WiFi connection and your email client on the HD2 as suggested by kilrah earlier (to connect to "the internet", not "work", and set the email client to use "the internet")
c) Turn WiFi on and check that the HD2 does indeed connect properly to the access point (green tick mark next to the SSID). If it doesn't try resetting the access point.
d) If it does, check that email works as expected (which at this point should be the case).
Hope this helps.
The most "effective" -simplest- solution i was able to find to the problem is to "duplicate" the email account.
The "duplicate" accout was created "while i was connected to the internet via wifi".
Actually this "alternative" account was created - obviously with a different "name" - to be able to clearly identify it and different smpt - to be able to send messages via the adsl provider-.
Now when i want to check the mail via 3g i use one account while when i want to connect via wifi i use the "alternative" account.
This way you may have every now and than the problem of duplicate incoming messages which need to be manually erased but at least don't have to make too elaborate modifications to the settings prior to access the mail.
I have the same problem but the other way arround. I mean that my Gmail account won't sync unless I'm on Wi-fi . Through Gprs it won't work !! I get a "Cannot Connect" message. HELP ME