the way to OS Localize your Universal
*****the files and tools you need*******
*imgfs_tool by mamaich
*boot_hv_tool by mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171&start=0
*HTC-64 Encodetool by bal666
http://forum.xda-developers.com/viewtopic.php?p=191164#191164
*hex editor (i used Heiw32 accroding to suggestion of Mamaich)
*NotePad in Windows
*Other high performanced Editor(if you have)
*Resource Hacker or PE Editor + Resource Tunner to edit mui
*Signcode.exe and sign with certificate
-----sorry can not write all in here,,, pls go to link---
http://www.asukal.jp/WM5_MUI/the way to OS Localize your Universal.mht
***********additional information 2006-May-15**********
regarding to initflashfiiles.dat and initboji.dat
i tired to write initflashfiles.dat in Japanese chalachtor, but not in CODE,
seems to work.
*write initflashfiles.dat in Japanese to specify Japanese Localized shell folders and Japanese re-named Short cuts. then add into rom.
also deleate both of 2 old dat files from rom.
then flash it back to my Uni, the localized shell folders were created!
this can save a lot of time to create the Localized ROM :shock:
But,,, still testing that ROM can work correctry.......or not.
<some appurication buttons can not assained if without initboji.dat>
*************2006-May 22 aditional********************
@ to edit the dll or exe from AKU2 rom, they have some difference.
Strings can be edited only with Platform Builder now.
pls reffer to this thread
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
Can I have your instructions?
Hi Asukal(sama):
I'm trying to localize my Universal to my local language.
I'm stuck now before boot set-up process after hard reset.
So, I would like to ask you several questions.
Could you show me your instructions / suggestions?
1) Certification Store (way 2-1)
You said I have to take out CertificationStore from registry file.
I could not find any key of "CertificationStore", so I compared my registry before and after SDK_Cert installation.
I found there are some differences in registry file, which are:
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\SPC\Certificates\XXXXX] –- 3 keys
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities\Certificates\XXXXX] – 3 keys
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Unprivileged Execution Trust Authorities\Certificates\XXXXX] – 2 keys
I removed "\" that locates on each line of hex data and write these keys on default.hv file.
However, the start-up process just after hard reset didn't start...
I also found some other differences on registry files, which seems certification file update time.
Do I have to put update time keys on default.hv file?
Or am I still missing something?
2) MUI (way 2-2)
I could sign *.mui files with SDK_Cert.
You said PE header must be corrected if I cannot sign *.mui.
In other words, you mean I don't have to correct PE headers because I can sign my *.mui?
As far as I checked my *.mui files, it seems OK.
3) iniboj.dat (way 3)
I could dump iniboj.dat and initflashfiles.dat and translated them to my language.
Of course I saved in Unicode (UTF-16) and removed the first 2 byte "ff fe".
When I run "delfile.exe", I noticed "delfile.exe" showed the error message that "delfile.exe" could not find iniboj.dat.
But I could add iniboj.dat with "addfile.exe".
Is this a normal message from "delfile.exe"? FYI, my base ROM is Qtek's AKU2; 1.30.77.
4) *.hv files (way 4)
I think the following is the keys that I must change.
[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"StartUp"="\\Windows\\StartUp"
"Recent"="\\Windows\\Recent"
"Programs"="\\Windows\\Programs"
"Favorites"="\\Windows\\Favorites"
"Desktop"="\\Windows\\Desktop"
Even I changed these keys, I cannot start my start-up process...
Are these keys enough to start start-up process?
I appreciate any suggestions / supports / instructions!!
Thank you.
hi! Camrade!
Re Qeuestions
1;certificate sotre. 3 entries are correct.
@But i am not sure what you removed???
i did not remove any thing and copy it to HV.
@yes update time must be in HV also.
like follows.
without this. no work as sertificate authentification.
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities]
"UpdateTime"=hex:\
00,e0,46,50,1c,96,c5,01
2;if your mui can be signed, they should be workable.
but i am afraid your mui of core-dll Strings Table were broken.
PLS reffer this thread about that!
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
if you are not sure, pls send me one of them to check it.
3:re-iniboj.dat, as you told me the eror message of delfile.exe will notice you, because i doesnt exisit in rom files. it was in XIP area.
But dont mind that. procceed it!
4;Shell folders; that is enough in hv, to just specify the loaction of Shell folder.<this also discribed in shellres.dll.
But no start up menu if there were localized Shell folders by failed initialized 2 dat files.
@the os can boot even the shellres.dll.xxxx.mui is not worked,
just missing Programs in StarMenu.
Now i am afraid your shellres____mui is read by OS, but it was incorrect.
@to change the Dr.Johnson screen to Japanes one, replace "stylus2.192.gif" and "stylus1.192.gif" with ones from JP os.
But the fisrt sentence before Stylus work for Dr.Johnson is from Shellres.mui, so your are failed in to read shellres_mui if it was still english.
Good luck!
Almost completed
Thank you, Asukal!
With your responses and instructions, I can finally boot my Universal with my language from boot screen!
I’ll make init*.dat file and try to make more localized ROM.
It seems a little difficult (complicated) to make initflashfiles.dat file translating to Unicode character code. But I’ll try!
Again, Thank you very much!!
shugoh
pls try to write iniflshfile.dat in Katakana, instead of Code,
i did try this some part of them just now.
Seems to be worked. But not sure .........didnt test all of in this dat,
just a part of it.
if the Katakana written dat was workable, it will be so easy to create
the Shell folders in Japanese................ :lol:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
chris_khho said:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
Click to expand...
Click to collapse
free hex editors can be downloaded.
many kinds of hex editors were in web.
Anyway, if i need something need test, i will call u! :lol:
Hi, Asukal:
This my be very stupid question...
I could translate html portion of shellres.dll with your instruction.
However, I still cannot do of tapres.sll and tshres.dll.......
Maybe this is because the type of resouce is different from shellres's.
So I tried to move html of tapres and tshres to another resources using PB because the other tools I have doesn't work...
When I wanted to save modified resource on PB, PB said I could not save the new resource because PB could not load resources from executable file...
I know this question is the basic one if I want to use PB.
But if you can show (a) hint(s) to me, I would appreciate your support very much.
Thank you!
shugoh
i guess PB can only save the files as "*****.exe" or "******.dll",
but not as a "******.dll.xxxxx.mui"
so you must save it as "anyname_you_want.dll" with out xxxx.mui to other folder.
then go to next step, because files edited with PB can not to be signed.
To enable to be signed, go following steps.
1;Open "any dll" or exe which havs correct PE header with Restorator.
2;Dlelete all of resources from this dll or exe.<make empty dll>
3:On another window of Resotrator ,
Open "anyname_you_want.dll" edited and save by PB
4rag and drop all resources exept "255" resource from
"anyname_you_want.dll" to "empty.dll"
5;save this empty.dll filled with resources of "anyname_you_want.dll",
as the name of your tagert xxxx.mui
6:Close all windows of resotrator.
7;try to sign on that mui, you may able to sign on that!
Good luck
Thank you for your instruction about PB and html.
however, I still cannot save modified file even though I put file name with *.exe or *.dll.
As my test, I opened x86 file and modified its file and I can save the modified. But still cannot tapres and tshres.......
I also tried some WM5 files, but not succeeded in saving it...orz
I installed all PB functions but for MIPS or SH4, which should not necessary for WM5.
The attaced is the error massage appreared when I wanted to save modifed WM file. (I installed Japanese PB, so error message is in Japanese)
"ta.dll" is only a temporary name for modified tapres.
I appresitate your any comments.
Thank you.
shugoh
I did it!!
Asukal:
I finally can make localized tapres and tsh with your recommended tools!!
Please see my blog at your convenience!
I'll try to localize folders with init*.dat files!!
Thank you very much!!
(If I have difficulties on making init*.dat files, I may ask you suggestions after I make every effort I can make,)
Thanks again
shugoh
Hi, Asukal
I can localize init*.dat file according to your post on May-15.
As you said, it seems OK that we can describe folder names on both *.dat file, not Unicode Code #.
So far I have no trouble with these *.dat files.
Thank you.
shugoh
Glad to here that!
You have done! you r a MAN!
Keep on going Dark Side!
Hello, Asukal
I'm back...
I have had a strange problem. As a matter of fact, I haven't solved this problem even though I could make Universal ROM in my language.
When I make my Universal hard & soft reset, I always see 2 white bold lines above and below "Windows Mobile" on 2nd splash screen.
I found these lines don't appear when I change mui regional setting. I mean no white lines on 2nd splash when I change:
1) shellres.dll.0411.mui to shellres.dll.0409.mui
2) shellresapps.dll.0411.mui to shellresapps.dll.0409.mui
(I'm trying to change English ROM to Japanese.)
0411 and 0409 have exactly same contents; I just change their name and place them on "windows" folder.
3) Change mui setting both of the following from 411 to 409.
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:00000411
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:411
With these changes, I can boot my Universal without white lines and Uni seems working well. (Of course, all letters except for the ones in these 2 mui are in English. But I suppose I can see Japanese if I change all 0411.mui to 0409.mui. (Haven't tested)
I also noticed I didn't change the region code in init*.dat. (i.e. LOC_0409_DIRWINDOWSHELP, not LOC_0411_DIRWINDOWSHELP)
So I changed init*.dat files and made new ROM with 0411.mui (incl. shellres & shellresapps).
However, there were still 2 white bold lines on 2nd splash...
I haven't added:
[HKEY_LOCAL_MACHINE\Security\ColdInit]
"Locale"=dword:00000411
"ColdInit2Done"=dword:00000001
"ColdInit1Done"=dword:00000001
Because my Uni has always stuck before the initial setup (screen alignment and Dr. Johnson etc.).
This time, I added these keys per your instruction, but I'm stuck again...
Do I have to add [HKEY_LOCAL_MACHINE\Security\ColdInit] ?
This would not directly relate to my experience, but I think I can find where I made mistakes.
I appreciate your response.
Thank you.
on my rom, i changed
LOC_0409_DIRWINDOWSHELP, to LOC_0411_DIRWINDOWSHELP
also i added folows
HKEY_LOCAL_MACHINE\Security\ColdInit]
but i dont think those are not reason of your problem,
did you tried to edit new one from versin nbf??
i guees the ROM was crashed,,, i never happend,
you think some reason of registry,,,
how about htis,,,
[HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI]
"FontArray"="500,600,900,1000,1200"
"CurFont"=dword:384
this is the for Screen resolution.
But in my case,,without this,, not happend problems like you,,,,
strange,,,,
Hi, Asukal:
I finally find the root cause of 2 bold lines on welcomehead screen!
the mui file taking charge of screen alignment on start-up set-up process causes this problem. I made the new one with PB and solved this problem!!
(I made the previous one with another tool...)
I'm very glad to inform you this and appreciate your supports very much!!!
P.S. However, I'm still stuck with Coldinit... But this is not an issue.
Hi All,
Wouldn't it be great to be able to control which applications ran on your PDA...Ensuring that your users could not run certain apps would be a real bonus.
So I came across a URL that explained just how to do this...
http://www.satter.org/2007/03/lets_shell_some.html#comment-74156022
Sadly, for me I am on WM6 but only have access to the WM5 SDK and when I tried to carry out the suggestions I failed with the SMS text error:
Change of Device Settings Unsuccessful
Your device settings cannot be changed by Test.cpf
So I am at a dead end. Can anyone else who has interest step in and assist this beginner to get this function working?
I ran the SDKCerts.Cab on my device and the SecurityOff.CPF file. They were successful and I got the SMS message telling me that the changes in SecurityOff.cpf were successful.
I am probably close to a solution but don't have the background to make the last few steps. Can anyone else assist me please?
Have I just a typo in my test.cpf file (on the URL there is a message about the script containing a typo error - I couldn't spot it though...was it fixed?)
All help is greatly appreciated and would deserve a beer or a cyber equivalent.
Many thanks,
PianoSam.
Could you post the wap-provisioning source you used? So I could check for a typo or sumthin.. I've done the same thing as the blogg describes, and it works fine with me..
I on the other hand, wanted to restrict wceload being loaded via Activesync->Add/Remove programs.. but it seems like RAPI doesn't use the same disallowrun settings etc..
But post you cpf file or you code.. and i'll take a look at it.
Hi,
Thanks for the assistance. I have attached a small zip with the various bits and pieces that I have.
My file is the test.cpf file. What I actually wish to do is to prevent Pocket IE from loading...although my test tried to control the clock.exe file.
all assistance is greatly appreciated and you have already renewed my hope that I might be able to do what is needed...
Thanks,
PianoSam
I'll have a look at it.. but it seems that the Test.cpf is just a doc or a rtf file you've renamed? You know this isn't a "cpf" file that wceload.exe can recognize?
I'll have a look at the registry settings within the file and build a cab/cpf file .. so i can test it... i'll let you know how this goes.. unfortunately, i can't reply before tomorrow.
I didn't realise...
Thanks for your help. I just created my test.cpf in word by cutting and pasting the xml script from the url.
I saved as utf-8 and thought job done. Sadly not.
So what should I do instead? forgive me but I don't know the steps to make a suitable cpf/cab file.
Once again THANK YOU for your kindness,
Sam.
Since the last update, the different voices in CoPilot are somehow "packed" into .dat files and makes me unable to modify any of them.
I used to modify the safetycamera.ogg file in the 8.0 version with a shorter speech, but I am now stuck on how to do this with this .dat file.
I join a .dat file for the french language to this post as a sample.
Does anybody have a suggestion ?
Thank you very much.
Laurent
just a quick look...
A quick look at this (with a text editor) and I'd say the .dat file is a whole load of .ogg files simply stuck together and the .inx file is an index with the text string eg "1kmwarning" & then the location of that within the .dat file.
It shouldn't be too hard to figure out and construct an appropriate .dat and .inx file for existing voices; since I don't have the app myself its not something I'm inclined to go further with...
hope that helped.
A.
PS - it just occurred to me that for backwards compatibility you might try the "old" way with just a folder of .oggs and see if that works - just in case you didn't already
Thank you very much for your post SatAmnesiac.
I tested your last tip today (using old ogg voices folder) but unfortunately it did not work.
I think that you are totally right regarding the content of those .dat and .inx files. Unfortunately I am not skilled enough to edit that.
If anybody wants to give it a try, do not hesitate to send me a PM for tests and/or assistance.
Cheers,
Laurent
Copilot Speech Tool
If someone is still interested here is a small tool for packing/unpacking copilot speech files. App requires .NET 4.0 to run. Sources included.
The tool is not much tested, so it should be considered as alpha or beta version...
copilot v9
Hi! Here are the voices from the Copilot v9. They still looks like an ogg files merged together except your tool do not want to split them
Can you fix it please?
I found the problem myself. There are two records inside (blackspotwelcome and cpwelcomelivepro) which have some broken symbols at the end. I have removed them in hex editor and your tool worked successfully.
Delphir said:
Hi! Here are the voices from the Copilot v9. They still looks like an ogg files merged together except your tool do not want to split them
Can you fix it please?
Click to expand...
Click to collapse
Better late than never
whenever i try and "build rom" i get this error
Code:
Packages Saved Successfull and inserted into Rom!!!
Payload yet in LZX Compression!!!
Modifing Lang on bat file...
deleting old bat...
Writing new bat...
Done...
Wait some seconds...
Executing kitchen_build_rom.bat... wait
Payload in LZX Compression by Default!!!
[B]
No ''SVN'' folders present...[/B]
Restored Original config.txt...
Temp config.txt Deleted!!!
[B]ERROR Building rom.....[/B]
Reenabling all skipped packages.....
All packages Reenabled.....
all done!!!
*the error accurs when the DOS window should appear.
can anyone tell me how to fix it please
(running window7)
"no svn folders" isn't an error for evk as far as i remember. You have another problem
thanks dude, hmmm wonder what the problem is then
i do have an old backup of my kitchen, to update it to what it should be would take some time coz i cant remember what exactly has been updated
(its been a while since i even touched the folder of my kitchen )
erm, if no-one has a soloution within the next couple of days then ill start copying, pasting, trial and error