..................................
4.5 is now available. Check main post.
Minor issue with 4.5 release
4.6 is available as a full install or just an update to 4.5
Check main post.
Many thanks... This is an incredible app!
As if an already amazing app couldn't get better! I feel like doing a hard-reset just to watch it work! haha.
Thanks!
UPDATE: 5.0 is now available.
don't work for other then wwe sytem because "storage card" in french is "Carte de stockage" thanks.
chiekh said:
don't work for other then wwe sytem because "storage card" in french is "Carte de stockage" thanks.
Click to expand...
Click to collapse
Please provide more information as to "don't work"
What doesn't work?
What are the error messages?
Although I haven't done extensive tests with non-standard storage card names, I renamed my card to "Carte de stockage" and was able to run an Auto install without an issue.
SASHIMI 6.0 is here! Check first post for change log and more information!
SASHIMI 6.5beta is here! Check first post for change log and more information!
one of the "must have" software for the flash addicts!
i am impressed. i watched yr videos....man, when you do something, you are going all the way the full 9 yards
thank you, thank you and ...R E S P E C T! !
oops, got confused and posted here, sorry.
Thanks man I was looking for something like this.
7.0 is now available
Cool, I like the AUTO function very much which now makes it possible to also auto install interactive setups!
I had to use other additional tools so far, but now no more!
Also Macisu is a great thing. By the way there are also VPN and GPRS settings based on the same technique which I think are not handled so far, right? Will you include them also in a later version?
Regarding the PIM backup: Because the auto install does not allow to overwrite some read only and similar files whereas the manual version is doing it according to the doc, I suppose this might be the reason that simply copying a PIM.VOL into the auto-root folder and trying to auto install it is not working, right?
But it would be very convenient if one could restore a pim.vol also in the auto install phase.
Is there any chance to get this done?
Thank you very much one more time for this phantastic and still getting better and better tool!
asango said:
Cool, I like the AUTO function very much which now makes it possible to also auto install interactive setups!
I had to use other additional tools so far, but now no more!
Also Macisu is a great thing. By the way there are also VPN and GPRS settings based on the same technique which I think are not handled so far, right? Will you include them also in a later version?
Regarding the PIM backup: Because the auto install does not allow to overwrite some read only and similar files whereas the manual version is doing it according to the doc, I suppose this might be the reason that simply copying a PIM.VOL into the auto-root folder and trying to auto install it is not working, right?
But it would be very convenient if one could restore a pim.vol also in the auto install phase.
Is there any chance to get this done?
Thank you very much one more time for this phantastic and still getting better and better tool!
Click to expand...
Click to collapse
Thanks..I'll answer here, but please post any additional comments/questions in the main SASHIMI thread.
Post any suggestions for Makisu in the Makisu thread (see it in my sig). Please try to link to any information on XML/CSPs you want added to help me in trying to implement it.
Also, as far as the PIM...no this won't work (even with the read-only overwrite in Auto phase). This is because the PIM.VOL is not able to be overwritten. This is not because it is read-only but because it is locked down by some system process. The method I am using to restore it is to rename the original, and then replace it with the backup. A reboot is needed to finish the job so that the system will take its lock off the old one and begin using the "new" PIM.VOL.
SASHIMI 7.5 is up.
Video highlighting some changes:
> here <
As the program grows it gets increasingly more time consuming for me to QA it prior to release. I appreciate any feedback, bug reports, etc. Enjoy!
hi bengalih. i see you are now supporting i780 screen resolution for 7.5.
let me know if you're going to support omnia in future releases. I'd be willing to test.
I used to run sashimi on my kaiser but since I relegated it as my secondary device, I haven't been flashing it lately. I did try to hack the scripts and found out that the code used is hard coded depending on the screen resolution so it didn't work on my omnia.
darth maximus said:
hi bengalih. i see you are now supporting i780 screen resolution for 7.5.
let me know if you're going to support omnia in future releases. I'd be willing to test.
I used to run sashimi on my kaiser but since I relegated it as my secondary device, I haven't been flashing it lately. I did try to hack the scripts and found out that the code used is hard coded depending on the screen resolution so it didn't work on my omnia.
Click to expand...
Click to collapse
Yeah, actually a user in the thread hacked the i780 support so I included it officially in this release (as I don't like "hacked" versions of SASHIMI going around.)
I believe the omnia screen is 240x400 is that correct?
What I will need you to do is download these test CABs:
http://forum.xda-developers.com/attachment.php?attachmentid=98270&d=1215661765
For each one I need a screenshot of the install location screen (Where is asks where you want to install).
Also, a full registry export (in .REG) format of your device may be helpful.
What does the omnia use for external storage, does it have a standard Storage Card slot like the Kaiser?
Once you get me that info I should be able to get the support in and I will post a beta for you to test.
Hi,
Thanks for bringing version 7.5, the root directory works so much faster now. It was very slow in version 7.0, but I didn't feedback about it, since it works.
Today's feedback is on Makisu, which you had added all the settings that WM provides.
After I use Makisu to create a wireless profile, it seems that the selection was not written in.
The profile I try to create:
1. Network name: ABC
2. Connects to: The Internet
3. This is hidden network
4. Authentication: Open
5. Data Encrytion: WEP
6. The key is automatically provided
7. Use IEEE 802.1x network access control
8. EAP type: PEAP
Note that after I created the above profile, save it, and provision it, when I went into the settings to see if everything was created correctly, item 7 was not checked, and item 8 not set.
I tried twice, the result was the same. You might want to check it out.
Thanks.
zard said:
Hi,
Thanks for bringing version 7.5, the root directory works so much faster now. It was very slow in version 7.0, but I didn't feedback about it, since it works.
Today's feedback is on Makisu, which you had added all the settings that WM provides.
After I use Makisu to create a wireless profile, it seems that the selection was not written in.
The profile I try to create:
1. Network name: ABC
2. Connects to: The Internet
3. This is hidden network
4. Authentication: Open
5. Data Encrytion: WEP
6. The key is automatically provided
7. Use IEEE 802.1x network access control
8. EAP type: PEAP
Note that after I created the above profile, save it, and provision it, when I went into the settings to see if everything was created correctly, item 7 was not checked, and item 8 not set.
I tried twice, the result was the same. You might want to check it out.
Thanks.
Click to expand...
Click to collapse
Yup, there was a problem there, easiy fixed and a 1.6 update is posted (both on the Makisu thread, and a SASHIMI-specific update on the first post of the main SASHIMI thread).
Thanks for the feedback!
Related
I do a lot of ROM flashing, and it is a pain to have to reinstall all my apps one by one after each flash. Previously, I was using the AutoRun utility to install my apps by simply running it after each flash; however, it's problem was that it is only able to install into main memory - not a storage card.
So what I would need is an auto installer that will: (1) Let you configure it manually beforehand; (2) Allow you to not only install to main memory but also to a storage card; (3) Also allows you to install registry items (i.e. can install a previously pulled owner information registry entry); and (4) Doesn't have to be 'cooked' into a ROM - but rather something I can setup on a flash card and then run it myself after I flash a new ROM. It would also be nice if it were simple to use (as by using a file folder structure to store installers, or my using a manually modified list).
Anything like this exist? I looked thru many threads but didn't really see anything that had all my points above.
Thanks in advance.
Cooked-in UC meets a couple, but not all, of your requirements.
Also, this post does not belong here. It belongs in the Q/A section: http://forum.xda-developers.com/forumdisplay.php?f=456
SASHIMI..............
Install express is the best tool for me
see here : http://forum.xda-developers.com/showthread.php?t=514934
I agree on SASHIMI !
So far that gives me everything I want. Copy file automaticly, install cabs (device or storage, you can decide), install reg files, provisioning xml files. It's great!
Before: Updating ROM would mean taking the night off
After: Within 10 mins I'm 100% up and running.
You need to invest a bit of time to set everything up (like backing up owner info and regional settings etc). But once you fully made it the way you want a ROM upgrade is really a simple painless process. *
*disclaimer: all depends on how 'complicated' your complete install is eh
DISCONTINUED DUE TO GINGERBREAD RELEASE AND NO TIME TO REWRITE ENTIRE SCRIPT
WILLING TO START NEW PROJECT WITH SOMEONE ELSE
INBOX ME IF YOU WANT MY HELP FOR A PROJECT
This application will allow you to:
Do everything to theme froyo
And More!!!
Android Theming & Tweaking v2 Alpha
Download below
2.0 Development - Enhancements Finished:
Work Directory can be placed anywhere
Work Directory Move & Update
Animated Splash Screen
Phone tools by Che123 & Me
using windows 7, it is not working for me! I click on 'click me' file and nothing happen
Edit: Click me.bat doesn't open menu.bat automatically, after I click 'click me.bat' I had to click 'menu.bat' to get the options to appear.
works like a charm~
good to see you're porting this over
i'll include the windows version in the original thread and have every OS in one place
all thanks for the windows version go to you
i'll also try and fix any bugs as i know better what the scripts are doing
blackfox888 said:
using windows 7, it is not working for me! I click on 'click me' file and nothing happen
Edit: Click me.bat doesn't open menu.bat automatically, after I click 'click me.bat' I had to click 'menu.bat' to get the options to appear.
Click to expand...
Click to collapse
Sorry for that, I'll have a look tomorrow and see what's wrong
I'll post a new update with lots of fixes tomorrow
(Strict parents - spent so long on computer they nagged me to turn it off, I'm 16 and they still boss me around lol)
I'll make sure all menus work (including click me) and most of scripts work properly
//edit
The only reason I know of for it not working is because you have a space in your username for Windows. Fix will be up today
//edit
The reason I didn't post it in yours because its too buggy to display in your thread, I wanted to keep a high standard in your thread. Once its finished I'll post it in yours
Sent from my HTC Desire using XDA App
shoey-n said:
The reason I didn't post it in yours because its too buggy to display in your thread, I wanted to keep a high standard in your thread. Once its finished I'll post it in yours
Click to expand...
Click to collapse
Would greatly appreciate that
Thanks again for your porting work
Regards
Alpha 2 Released!
Fixed all visible bugs, all menus (including CLICK-ME) should now all work
Most scripts should work properly
Report all bugs to thread (either post up error shown or name of script)
Any suggestions for extra features are welcome as well (I'll tell cgrec92 about them for his version as well)
shoey-n said:
Alpha 2 Released!
Fixed all visible bugs, all menus (including CLICK-ME) should now all work
Most scripts should work properly
Report all bugs to thread (either post up error shown or name of script)
Any suggestions for extra features are welcome as well (I'll tell cgrec92 about them for his version as well)
Click to expand...
Click to collapse
the click-me still not working for me on windows 7 x64
To get the patch work in windows 7 all you need to do
is place the "ThemePro" folder on you desktop!!
mine wasn't working either until i did that
nope still not working
then also try to enter the
"properties" of both the '.bat' files in the directory and play with the "compatibility" options.
hmmm, I don't see why it doesn't work, I'll do some research about x64 because it works fine x32
Can you post up the path to your desktop please (if you don't want to show username, replace with ** but if there's a space in your username include it clearly)
Found a better way of calling the other files, it will work with everyone
(sorry for issues VeeDubZ)
You will be able to run Theme-Pro from anywhere you want, no need to place on Desktop
The Work Directory will still be placed to Desktop by default, I'm adding an option to let you specify the directory you wish to put it
(e.g Where would you like to place your Work Directory?: C:\Users\shoey-n\My Documents)
The update will be up today, and I hope to merge most of Theme-Pro 3.0 features by tomorrow
Hi shoey-n,
Why do you use this command line in CLICK-ME.bat :
call "%homedrive%%homepath%\Desktop\ThemePro\menu.bat"
Click to expand...
Click to collapse
instead of this one :
call "menu.bat"
Click to expand...
Click to collapse
?
I had the same issue than VeeDubZ with the original click-me.bat and by using this command line, it solved it.
Cheers
Thanks for the suggestion, I just noticed that when I was testing out my new way of doing it. That way will be much easier. I'm updating it with that now
New version should be up tonight
//edit
Sorry guys, I've updated the script but haven't had time to upload ( internet is really slow, so it'll take about 15 minutes )
So I'll do a major update for the release tomorrow, just for you lot
thanks for the fix, no worries about the problems with it, i started using the linux version for now, your version will just save me rebooting to use that one.
my path is the standard path that a user would use without any spaces C:\Users\vaughn\
Thanks for the progress update, looking forward to the release.
V.
Alpha 3 is out, few changes and enhancements to this version
Been tested outside of ThemePro but not inside. Hopefully new method works (hopefully uploaded right one )
Added transparent notification drawer mod (uploading for themepro 3.1 Mac/Linux in 5mins, compiling it and adding to scripts right now)
Changelog is up on first post
alpha 3 broke it all for me... none of the options work, Cmd spits out an error about "er" not being a system variable, and not being able to find the directory...
That means I made a typo somewhere, the way I done it means I only have to check 2 files so should be easy to fix, thanks for reporting the bug, fix will be up in the morning
Sent from my HTC Desire using XDA App
Beaverman20 said:
alpha 3 broke it all for me... none of the options work, Cmd spits out an error about "er" not being a system variable, and not being able to find the directory...
Click to expand...
Click to collapse
Thanks for your bug reporting, it's all fixed now
I've tested it and can confirm working
I've already tried posting this in the official thread in the WP7 General board but I'm certain it's already been lost in the commotion. So here's the deal:
1) I initially downloaded the PBK file and couldn't run it due to having Adobe Software installed.
2) I managed to discover that rasphone.exe is the program that's supposed to run PBK files and made it the default program for it.
3) When I run the PBK file it tells me the "phonebook is empty."
This means I can't just go in and select the hungarian VPN and go. Would someone be so kind as to go into the properties for the network, and copy down all settings? I would truly appreciate it. Thanks in advance.
I'm in the same situation...
try right clicking the file and use open remote access or whatever the name is...that fixed it for me
Ahaha, you can manually set up a new vpn using ttu.2.usaip.eu as the server, and the update seems to be working
fryjs said:
Ahaha, you can manually set up a new vpn using ttu.2.usaip.eu as the server, and the update seems to be working
Click to expand...
Click to collapse
That's exactly what I needed. Sorry for not coming back in here with that.
Yeah, I managed to get the update. =)
Solution
Hello Guys,
Here is the solution :
Check this page : blog***.***komeil**.**com/2011/01/fix-pbk-extension-vpn-file-type-adobe.html
Download the fix on this page, run it, reboot and that it !!!
Bye
Fabio
Hi Everyone,
I just received a brand new ATT Focus from US ( with the SIM unlocking code also ).
The phone is rev 1.3 and running 7392 atm.
Searched and searched on XDA, Google also...couldn't find a definitive answer at all...
What is the easiest/fastest way to get to dev unlocked Mango ?
So far, from what I've read is to revert to 7004-chevron unlock-update NoDo- keep the unlock-update mango ( of course some registry tweaks during the way).
Thanks,
htc9420 said:
So far, from what I've read is to revert to 7004-chevron unlock-update NoDo- keep the unlock-update mango ( of course some registry tweaks during the way).
Click to expand...
Click to collapse
That is the only way except ofc, paying the developer unlock.
OMFG...I'm stuck @ 7008 version. Zune tells me it's the latest update...LOL
this is driving me nuts...can do Silverlight but can't update the freaking phone
htc9420 said:
OMFG...I'm stuck @ 7008 version. Zune tells me it's the latest update...LOL
this is driving me nuts...can do Silverlight but can't update the freaking phone
Click to expand...
Click to collapse
Try on another computer. That solved it for many.
Job done
haha, I wasn't seeing the trees because of the forest.
For anyone that might get interested in this, here are the steps that worked great for me ( didn't put any SIM, nor had the time adjusted):
All info I had maily came from this :
http://forum.xda-developers.com/showthread.php?t=1143999
1. Install/flash 7004. Unlock via chevron. Use any registry editor to erase the values from HKEY_LOCAL_MACHINE > Software > Microsoft > DeviceReg/PortalUrlInt, remove its value data and save it. Do the same with PortalUrlProd
2.Zune upgrade to 7008.
3.Zune upgrade to NODO.
STOP THE UPDATING WHEN DONE otherwise ZUNE will automatically proceed to the last two updates that leads to Mango.
4. Deploy http://forum.xda-developers.com/attachment.php?attachmentid=722646&d=1316284246
5. Deploy http://www.edisk.cz/en/download/38910/New_SMS_unlock.xap_41.01KB.html
6. Make root /provxml. Copy unlock.xml to it.
7. Let Zune do the rest.
In my case, everything worked flawless and updated to the last samsung update: fm 2103.11.8.1; radio: 2103.11.8.1 BL: 5.8.0.2
you forgot to mention that after updating to mango 7720, you need to run the diagnostics app to load the "unlocked" profile. Heres a link to the thread, but this thread i find is unclear;
http://forum.xda-developers.com/showthread.php?p=16809179
What i did was the following AFTER the update to MANGO!
1. Enter the diagnostics terminal by entering "##634#" as a phone number
2. Typed "*#9908#" in the diag. mode, which brought me to the GPRS settings
3. Scrolled through the list of profiles, selected "unlock", clicked "save"
4. now your focus is ready for sideloaded apps!
htc9420 said:
haha, I wasn't seeing the trees because of the forest.
For anyone that might get interested in this, here are the steps that worked great for me ( didn't put any SIM, nor had the time adjusted):
All info I had maily came from this :
http://forum.xda-developers.com/showthread.php?t=1143999
1. Install/flash 7004. Unlock via chevron. Use any registry editor to erase the values from HKEY_LOCAL_MACHINE > Software > Microsoft > DeviceReg/PortalUrlInt, remove its value data and save it. Do the same with PortalUrlProd
2.Zune upgrade to 7008.
3.Zune upgrade to NODO.
STOP THE UPDATING WHEN DONE otherwise ZUNE will automatically proceed to the last two updates that leads to Mango.
4. Deploy http://forum.xda-developers.com/attachment.php?attachmentid=722646&d=1316284246
5. Deploy http://www.edisk.cz/en/download/38910/New_SMS_unlock.xap_41.01KB.html
6. Make root /provxml. Copy unlock.xml to it.
7. Let Zune do the rest.
In my case, everything worked flawless and updated to the last samsung update: fm 2103.11.8.1; radio: 2103.11.8.1 BL: 5.8.0.2
Click to expand...
Click to collapse
Consider me new; can you connect steps 4 and 5 with step 6? 4/5 are each XAP files, what purpose does each serve?
Also (and maybe related), unlock.xml seems to be within one of the linked XAPs if you change it's extension to ZIP. How do I copy it to /provxml? This isn't self evident to me, but maybe it is once in Root Tools? I haven't been in Root Tools yet, but is there somewhere to do step 6 within this and if so, can you summarize where?
Sorry for the many questions, there's a lot of info that's hard to digest on the matter - this is pretty close to being the best (most understandable) step-by-step once the questions I posed are answered. Thanks.
xaeryan said:
Consider me new; can you connect steps 4 and 5 with step 6? 4/5 are each XAP files, what purpose does each serve?
Also (and maybe related), unlock.xml seems to be within one of the linked XAPs if you change it's extension to ZIP. How do I copy it to /provxml? This isn't self evident to me, but maybe it is once in Root Tools? I haven't been in Root Tools yet, but is there somewhere to do step 6 within this and if so, can you summarize where?
Sorry for the many questions, there's a lot of info that's hard to digest on the matter - this is pretty close to being the best (most understandable) step-by-step once the questions I posed are answered. Thanks.
Click to expand...
Click to collapse
When you get to NoDo-cancel search for updates as it will surely get you to Mango without unlock.
Install ''WP7 Root Tools" from the link-yes it is a xap.
Install " New SMS" xap from the link.
Open WP& root tools on phone. Make a provxml folder in root. Navigate to Applications/Install/D19A80F2-..../Install and copy unlock.xml.
Paste unlock.xml inside the previously created PROVXML folder.
Exit.
Go to home screen open Phone.
Go to dialer- dial ##634#. A new program should open.
Type *#9908# and a new dialog comes out.
Choose unlock from the list. Press save. Exit.
Done. Fertig. Listo. Finito.
Hope it's clearer this time. Good luck.
This steps should be posted in a new thread and stickied.. IMO, its really hard to find good collected guide about the focus...
3G not working after Unlock
Hey guys, have you noticed that 3G data doesnt work anymore after loading the unlock.xml profile under Mango? I tried reloading the other presets that were available in the GPRS diag. shell, but my 3G is still knocked out. Any thoughts? I am with Rogers in Canada
htc9420 said:
When you get to NoDo-cancel search for updates as it will surely get you to Mango without unlock.
Install ''WP7 Root Tools" from the link-yes it is a xap.
Install " New SMS" xap from the link.
Open WP& root tools on phone. Make a provxml folder in root. Navigate to Applications/Install/D19A80F2-..../Install and copy unlock.xml.
Paste unlock.xml inside the previously created PROVXML folder.
Exit.
Go to home screen open Phone.
Go to dialer- dial ##634#. A new program should open.
Type *#9908# and a new dialog comes out.
Choose unlock from the list. Press save. Exit.
Done. Fertig. Listo. Finito.
Hope it's clearer this time. Good luck.
Click to expand...
Click to collapse
Yup, it's not much different from your previous steps, but the few bits you added helped make the rest more evident. Danke!
pachuau86 said:
This steps should be posted in a new thread and stickied.. IMO, its really hard to find good collected guide about the focus...
Click to expand...
Click to collapse
Agreed!
---------- Post added at 08:36 PM ---------- Previous post was at 08:29 PM ----------
ssingh819 said:
Hey guys, have you noticed that 3G data doesnt work anymore after loading the unlock.xml profile under Mango? I tried reloading the other presets that were available in the GPRS diag. shell, but my 3G is still knocked out. Any thoughts? I am with Rogers in Canada
Click to expand...
Click to collapse
Look around in the WP7 hacking forum for mango update threads - I remember reading something specific to this very issue - "how to fix 3G after provxml unlock" or similar...
ssingh819 said:
you forgot to mention that after updating to mango 7720, you need to run the diagnostics app to load the "unlocked" profile. Heres a link to the thread, but this thread i find is unclear;
http://forum.xda-developers.com/showthread.php?p=16809179
What i did was the following AFTER the update to MANGO!
1. Enter the diagnostics terminal by entering "##634#" as a phone number
2. Typed "*#9908#" in the diag. mode, which brought me to the GPRS settings
3. Scrolled through the list of profiles, selected "unlock", clicked "save"
4. now your focus is ready for sideloaded apps!
Click to expand...
Click to collapse
Just to confirm, you went through 7392, 7403, and 7720 all BEFORE selecting the unlock profile, right? LOL, I rolled back to Nodo to do this a few days ago, and Zune isn't giving me the option to update anymore, so when (if?) it finally does, I want to make sure I don't screw up and have to roll back again.
Not sure why it continues to tell me no updates are available when I have already gone through the update (using the official process) before, so I know it has been released to me. Perhaps it was only "available" to me briefly before they moved on to a different set of users?
do i have to use the unlock using dialpad BEFORE or AFTER mango update... im in 7392 (i think thats NoDo???) right now, and im confused
CustomEdgeFavs helps you to extend the functionalities of Microsoft Edge by adding the bookmarklet features.
I've created two variants: the "Desktop" edition for Windows 10 PC and the "UWP" edition for Windows 10 Mobile.
They're quite similar, the only big difference is that Windows 10 Mobile needs an initial configuration to work.
UWP EDITION - INSTALLATION ON WINDOWS 10 MOBILE (DON'T USE ON DESKTOP)
1. Extract the zip file
2. Copy the files within your phone
3. From the File Manager on the phone, open the only appxbundle available and confirm
4. Wait some seconds: the app will appear within the app list
IMPORTANT TIPS AND ADVICES, READ CAREFULLY!!!
1. If you're having some permission problems while saving the lnk file, you can manually copy the lnk file by downloading the zip provided here.
2. You can install the appx on Windows 10 PC, but this will not work due to permission problems. Please use the Desktop Edition.
3. To allow Edge to recognize the changes, you've to remember the website where you've created the favourite. After the creation close and reopen Edge, navigate to that website, open and close the favouries (you can try to switch folder too) and then navigate to another website.
4. UWP edition doesn't require Interop-unlock to work.
5. You can't add or remove favourites from CustomEdgeFavs. You've to create or remove these directly from Edge and then edit with CustomEdgeFavs.
6. If you can't delete a bookmarklet, try to edit that again, then open Edge and try to delete before syncronizzation.
7. The favourites syncronizzation will work even with edited bookmarklets. Be careful as you can lose or damage your favourites.
LATEST VERSION + CHANGELOG
Desktop Edition - 1.0 16/01/2016
UWP Edition - 1.0 16/01/2016
p.s. Here's a tutorial in italian with some script tested and created by me http://www.windowsblogitalia.com/2016/01/microsoft-edge-customedgefavs/
Working fine on PC but........
I used the desktop app and it worked but its not installing in phone. I tried from file manager did not work and when I used Device Portal it shows me this error, " Failure reason: Failed to start deployment. Failure text: Package failed updates, dependency or conflict validation. (0x80073cf3) "
Hi, could you try to open the appxbundle from the file explorer app?
Pasquiindustry said:
Hi, could you try to open the appxbundle from the file explorer app?
Click to expand...
Click to collapse
I did. The pop up for installing the apps comes up. once clicked it goes away and then nothing happens. I hard reseted and now trying again.
That's strange. Are you on build 10586 or higher?
i am on the latest build and had reseted the phone. i can still deploy other appx but not yours. Its working fine in PC though.
Hi, try these appx. There are dependencies that you may need to install to make this app working.
You'll find two appx within the zip file.
I think that you can install them from the file manager.
now its done but i had to do a bit tweaking.
Pasquiindustry said:
Hi, try these appx. There are dependencies that you may need to install to make this app working.
You'll find two appx within the zip file.
I think that you can install them from the file manager.
Click to expand...
Click to collapse
Using dependency it worked but as i suspected the shortcut link you have given did not work. So i went into packages ( i made a short cut from PC and copied it to phone. i think you should make a shortcut from the address of edge bookmarks folder on PC ) . After that went to edge folder , roaming state. Voila your app shows me " Success "
I'm already creating lnk files from desktop
Which path did you use? In my phone, the correct path is c:\Data\usera\DefApps.Windows Phone\AppData\Local\Packages etc... (the one available within C.E.F.)
Pasquiindustry said:
I'm already creating lnk files from desktop
Which path did you use? In my phone, the correct path is c:\Data\usera\DefApps.Windows Phone\AppData\Local\Packages etc... (the one available within C.E.F.)
Click to expand...
Click to collapse
i went packages and the Microsoft edge folder.
I tried your other apps before, those were nice. Device diagnostic hub should have a page showing running apps ( not system apps ) like task manager- lite
katsuga said:
i went packages and the Microsoft edge folder.
I tried your other apps before, those were nice. Device diagnostic hub should have a page showing running apps ( not system apps ) like task manager- lite
Click to expand...
Click to collapse
If you can recover the complete path or the lnk file, I will add within the OP
About Device Diagnostics HUB, I've merged the "apps" and the "processes" within the same list. I will add a filter within the next big update (I'm going to release a bugfix with some better translations soon, then I will release the 2.0 with a lot of new features). I've opened a dedicated forum for DDH here http://forum.xda-developers.com/win...-device-diagnostics-hub-performances-t3276664
p.s. diffidate from imitations XD
Pasquiindustry said:
If you can recover the complete path or the lnk file, I will add within the OP
About Device Diagnostics HUB, I've merged the "apps" and the "processes" within the same list. I will add a filter within the next big update (I'm going to release a bugfix with some better translations soon, then I will release the 2.0 with a lot of new features). I've opened a dedicated forum for DDH here http://forum.xda-developers.com/win...-device-diagnostics-hub-performances-t3276664
p.s. diffidate from imitations XD
Click to expand...
Click to collapse
hey. i made a shortcut from pc and working on phone. give me your email id i will send the shortcut file. I tried to post here but xda said i cant.
katsuga said:
hey. i made a shortcut from pc and working on phone. give me your email id i will send the shortcut file. I tried to post here but xda said i cant.
Click to expand...
Click to collapse
I think you've to put the file within a .zip. You can send the file here:
pasindustry at Outlook dot com
Pasquiindustry said:
I think you've to put the file within a .zip. You can send the file here:
pasindustry at Outlook dot com
Click to expand...
Click to collapse
yeah i have sent you the file . check email. Beside that is it possible to get those interlop unlocking tool in appx format. I dont know why but i could never deploy xap using deployer or power tool. For which i am unable to do interlop unlock
katsuga said:
yeah i have sent you the file . check email. Beside that is it possible to get those interlop unlocking tool in appx format. I dont know why but i could never deploy xap using deployer or power tool. For which i am unable to do interlop unlock
Click to expand...
Click to collapse
I will update the lnk asap
Really thanks!
Pasquiindustry said:
I will update the lnk asap
Really thanks!
Click to expand...
Click to collapse
no probs... keep on making such mods. Well try to make them independent of interlop unlock like this one as i cant interlop unlock my phone
Would be good to add auto-fitting the image to certain dimensions and the possibility of personalization as in the Start menu. If that's possible. For example:
https://youtu.be/GVMLHa42U7s
Sorry for my English
Hi. After a few days of excellent work in the program will stop displaying the websites. Re-jump and run is not helping. Is there a way how to fix it?
maxaon09 said:
Hi. After a few days of excellent work in the program will stop displaying the websites. Re-jump and run is not helping. Is there a way how to fix it?
Click to expand...
Click to collapse
Mhm... this is the first time I see this problem.
Have you disabled some settings related to synchronization or you've done some updates from Windows Update? Try to reduce the numer/size of the favourites and their icons too
About the concept, unfortunately that's not possible, because it's possible to use only a picture and I can't add more options to the favourites list within Edge
Pasquiindustry said:
... Try to reduce the numer/size of the favourites and their icons too...
Click to expand...
Click to collapse
Yes, perhaps there is any limit on the number of\a size. If you delete all the created tiles, the program again has earned (remove 1-2 tiles did not solve the problem). When the size of 70x70 pixels was created about 35 tiles.
About the update: the program has been installed on the build 14251. Then updated to 14257. The program works excellent, all created in the early build displays and new. Thank you
=======================================================================================
After 3 hours :Reduced the icons to 50x50 pixels. Created 19 tiles. Closed the program. Then again launched and again the sites ceased to appear.