i need a tool to record incoming and outgoing calls. i couldnt find any software. does anyone of you know a solution ? pressing manually and holding the voice key it not a good solution for me.
thx in advance
Try PMRecorder
http://1800message.com/default.aspx
Hi,
I´ve tested PMRecorder on my Prophet this morning. Nice program, but unfortunately only my own voice is recorded.
Recording of both speakers will only work with Cingular 2125 and HTC Tornado devices at this time.
I hope they will fully support HTC Prophet soon
Greets
Knackeback
does not work as it was told here. only my voice is recorded in a bad quality ....
you will not be able to do so, it is not taking the voice from the modem but from the speaker. you can put the device on loud speaker mode and record it.
Hi all,
I have Qtek s100 since exactly 2 years. I am very happy and even after relasing so many HTC PDA phones after that, I really did not think of changing my phone. Now I see P3600 as probable candidate to replace my S100. But in addition to size and processor, I would also be looking at some key features as justification to change. I am not going to use 3G or 2MP camera. so, lets narrow down to Free/very cheap phone function on this phone.
- anybody tried to install Skype client to make audio calls on wifi connection?
- Also anybody checked function of SIP voip client like SJPhone again using wifi?
If these features are going to have problem with.. I would still stay back with S100 happily.
AS
Skype works fine on it and I run VoIPSurfer for SIP without any problems!
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
This is only available on the Eten X500. I finally decided to get this instead of the Trinity coz I dun use the 3G and the GPS is a lot better on the X500.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is a limitation in Skype. Try using a headset. Not BT though, since the processor can't handle both Skype and BT headset at the same time..
With my LOOX 720, we also have a "large" speaker (badly positioned even if you wanted to ignore that it is a loudspeaker and put it in your ear) and a small "phone" speaker (placed correctly where you would put your ear), although FSC never released any VoIP app for the device (and LOOX is not a phone).
Skype (and other VoIP apps) worked as you say. Audio was coming out of the main speaker, plus they (Skype) ignored our requests to use the correct speaker (or didn't know what to do about it).
Then some guys noticed that the small speaker was ALWAYS outputing audio (in apps/games etc.), but since it is a small phone speaker, you have to put your ear on to hear it. Also this gives more "depth" in 720 audio (since the tiny speaker does its part). Anyway, that was an interesting discovery because it led to research that gave something more important:
A simple registry entry could shut-off the main speaker while keeping the phone speaker working! No need for soft reset or anything! Some even made a little program for this (which also keeps different volume levels for when on and off since eg. I want volume=2 when loudspeaker is on and volume=4 when only ear speaker is on). Toggle it whenever we want (I have a shortcut in my today screen for it).
So I am thinking... look for something like that in Trinity also? It should even be simpler because I am sure Trinity has pretty clear and distinct volume values for both speakers (since this IS a phone after all).
Maybe a shortcut to a registry key could allow to control the speaker volume... like in the loox. I'll try to search registry... Anyway, this is a known issue for skype, so probably they will be working on that on future releases, maybe it needs customization for every particular model. _http://forum.skype.com/index.php?showtopic=71698
Skype and Bluetooth
I use a stereo BT headset and it works great (iTech clip S38). I used another program to toggle, but battery life went to a couple of hours, even when not in use. If you Skype a lot, or even once on an international trip, the cost is well justified.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is possible now with the last final (not beta) version of Skype (2.2.20 or something like that).
The problem is, this final version doesn't work for all phones. You can see the list of supported devices on Skype download page.
The Trinity is not supported on this final version. You can only use chat function, and when you place a voice call, the application automatically shut down.
That's why we keep running the previous beta versions, which work fine, but the sound come from the back speaker
I tried this final version on my wizard, and I confirm that the sound does come from the ear-piece, for the first time in skype history. But strangely enough, this 'new' skype is only compatible with 'old' phones...
The text found below was sent to Skype by me today
Dear Skype,
#1 please sent me a list of supported Pocket PC’s that work with skype and with a Bluetooth A2dp Headset.
The one I have now can be found at: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx and I works really well for windows media mobile.
#2 I currently have the following device which does not work with Skype for the Pocket PC with an A2dp headset. I am very upset about this; I really want to use your skype out service, but cant.
My Device Information: Unlocked
HTC P3600, Trinity
ROM version: 1.23.405.2
ROM date: 03/11/07
Radio Version 1.38.00.11
Protocol Version: 32.71.7020.12h
ExtROM Version: 1.23.405.103
I have installed the following versions of Skype for PPC
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.2.0.18-Beta.cab
kypeForPocketPC-2.2.0.20-Beta.exe
SkypeForPocketPCNew.CAB
The only one that works is the SkypeForPocketPC-2.2.0.18-Beta.cab it works perfectly for the HTC P3600, Trinity however, "only" when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
the SkypeForPocketPC-2.2.0.18-Beta.cab, I feel, does not work with any A2DP Bluetooth headset.
I have tried the following A2DP Bluetooth headsets
JabraBt8040
Link: same as above
Plantronics Voyager 855 Stereo Bluetooth Headset
Lubix UBHS-NC1 Stereo Bluetooth Headset
I think something goes wrong when the Bluetooth stack tries transfer the Skype audio to the Bluetooth headsets it gets all messed up with lots of echoes and sound disconnects and, latency and so on. However playing any multimedia files on the phone work perfectly through my A2DP Bluetooth headset.
Like a said SkypeForPocketPC-2.2.0.18-Beta.cab works perfectly only when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
I have also tried to use a whole bunch of 3rd party applications that redirected the sound to my older mono headsets. I tried three of them, and that did not work either. It’s something when the speaker sound gets transferd to any BT device.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/welcome/cart.php?target=product&product_id=1128&category_id=40
I read that It works well with Skype, and the sound is sent to the phones earpiece after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache:cwIdCCuH2LEJ:www.etenblog.com/2007/11/13/getting-skype-to-work-as-it-should/+skype+Switch+program&hl=en&ct=clnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Update: 02/16/08
I Just got an ETEN x800 and istalled the Skype Switch and took skype for a test run ,, ya,ya, the sound gets redirected to the earpiece,,, ya, but it sonds like sh_t also..
Someone out there has to be able to Hack this mess.
DTMF ,Fring, PPC Skype, And A2DP.
For the Skype sound problem not going through the BT headset someone on this site suggested using fring which is a fantastic idea, however it’s always something... with fring you can place a Skype out call but during the call you can’t navigate company’s phone menu during the call like, “press 1 for billing” “press 2 for sales”. There isn’t even a dial pad. When I contacted there support department I got this:
Hello,
Thank you for contacting our support team.
Currently, it is not available to dial DTMF sounds on fring, this should be implemented in future versions. You can stay up to date on new releases from our blog http://www.fring.com/blog/
In other words, I’m not holding my breath.
Is there a way to transmit a DTMF signal to the input of a Bluetooth A2DP headset? I don’t mean literally, just a sound redirect, in other words trick it into thinking it’s me making the DTMF sound.
I can’t find anything on the net except for Dial-a-matic, which will not work. I also took a look at Pocket Dialer v1.03 but there is no way to redirect sound. I also thought that maybe Kai’s ContactDialer would work but I don’t think it does, or I don’t understand how to use it and get it to work.
I also wonder if all of these problems are salved on WM6 I was looking at upgrading to the new HTC P3470 but the processor is slower than the p3600.
God,, do I want to get rid of that stupid weird mini HTC usb headset, ridicules for a $700 phone.
I wouldn’t need to go through all this if Skype would just finally fix their PPC version to work with a Bluetooth headset.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/...category_id=40
I read that IT works well with Skype, and the sound is sent to the phones speakers after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache...lnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Hello,
I'm trying to use PortSip as a SIP client as mentionned in other posts (http://forum.xda-developers.com/showthread.php?t=508715).
www.portsip.com
Tried both on wifi and 3G:
- I can hear the voice of the contact I called pretty well
- But my voice is not understood by the other side: it's all cut (as if the line was really busy and got loads of delay / lag)
I also tried different wifi, some of them were quiet fast...
I even tried to call on the same wifi network with a SIP client on my laptop, and this call was perfect.
So, I guess the problem comes from my HTC HD2 (leo)...
Does anybody encounter this kind of problems?
What should I try?
Thanks.
I finally installed the WM VoIP cab. Everything's working fine now, except that the sound comes out the external speaker.
So, I installed AudioRoute, and the sound now comes from the "ear" speaker... but the volume is really low.
Any idea on how to boost it?
There are programs for windows mobile but I can't find any for windows smartphone 6.5 . I'm also looking for stock quotes software... one that can use stocks from non US markets.
I managed to get incoming VoIP/SIP working with a native app but it was a bit messed up. Basically I installed this package: http://forum.xda-developers.com/showthread.php?t=596682
and followed this guide: http://forum.xda-developers.com/showthread.php?t=299950
I can't get outgoing to work, but incoming works.
Wow you got it working? Which device do you have? I tried with the HTC Maple (called Mobilicity Snap here) and could never get the audio to come through the earpiece.
Anyway, the two programs I've tried that DO work are AGEphone and fring.
On the Mobilicity HTC Snap I got it working, yes. The question was not about using the earpiece, it was about using the native VoIP client. In fact, I did manage to get the VoIP calls through the earpiece but it has a very bad negative effect: the ringer also goes through the earpiece after a few seconds, thus making the ring on incoming calls very quiet. In my opinion, it is much better to use the headset for VoIP calls as it provides excellent quality, no echo and no problems with the ringer.
The problem with outgoing calls is in the way WinMo's VoIP places the calls. They work with Voxalot but not PBXes. I am assuming everybody can just use Voxalot as a middleman between the HTC Snap and the voip provider if there are any problems with outgoing calls.
That's funny, as I could never get it working with the headset. Outgoing calls worked, but only over the speakerphone, while incoming calls had no audio at all. The mic didn't even work; I could press the keypad and get a DTMF tone, but that was it.
Could you tell me exactly which steps you took to get the audio to come out of the earpiece? I kind of gave up and am using fring, but it would be interesting to see how you did it.
xenyz said:
That's funny, as I could never get it working with the headset. Outgoing calls worked, but only over the speakerphone, while incoming calls had no audio at all. The mic didn't even work; I could press the keypad and get a DTMF tone, but that was it.
Could you tell me exactly which steps you took to get the audio to come out of the earpiece? I kind of gave up and am using fring, but it would be interesting to see how you did it.
Click to expand...
Click to collapse
Sorry, apparently I was wrong, even with the earpiece hack (I tried both of them) the most you can achieve is to get the ringer to go through the earpiece but once the call connects it goes back to the speaker.
The only solution is to use the headset. I tried for outgoing only and I am able to dial, send DTMF and speak, so the mic works well.
With the native client on the HTC Snap VoIP works only with headset. Overall, I have been using WinMo for about a week and I can say that I hate it more than any other OS I have used. I wish we could get Android to boot but seems like the CPU on the Snap is messing up the effort.
Fring is also garbage on WinMo. It often fails to connect and when it does connect the call quality (over WiFi) is much worse compared to Fring on S60 or iOS. It eats the battery like a monster, something that doesn't happen on S60. There is no way to change/silence the ringtone with Fring on WinMo and if a call comes over the GSM line while you are on a call with Fring your Fring call goes through the speaker, very embarrassing.
I got my Snap for 100$ from Mobilicity and I think the hardware is worth it, but Microsoft should be paying me for being stuck with their useless OS.
HI everyone
I am using a Si9505 imperium rom
Recently i tried to make multiple phone calls and when in the call i haven't been able to hear the person on the other end and they cant hear me (This also happens when i receive a call)
however when my friend calls me over skype or viber on my phone the speaker and mic is working perfectly fine and we can talk?Does anybody know what could be a problem hw or sw?Tnx in advance