Compact with HP foldable bluetooth keyboard - JAM, MDA Compact, S100 General

Hi, I have this keyboard, but dont work, I have tested Toshiba Stack, widcom too, but keyboard dont work. If I enable keyboard driver, I obtain dkbdriver not found. What I need to use this super keyboard with MDA Compact? Thanks

No one use this bluetooth keyboard with MDA Compact?

I dont have one but even with the BT stack current, you should not have any issues if you have paired them.
you may want to upgrade your bt stack this would sort it out.

I have tested all, what I found, but still nothong, same problem

Related

Driver for Logitech BT keyboard

I'd like to buy the Logitech diNovo bluetooth keyboard+mouse.
But I'd like to use it also with my MDA2.
Any experience, advice, tip?
I have a diNovo keyboard. So far I have not been able to get it to talk to my imate. I do not think a driver is available.
Amfibius said:
I have a diNovo keyboard. So far I have not been able to get it to talk to my imate. I do not think a driver is available.
Click to expand...
Click to collapse
I've seen a beta version of driver for PalmOS.... That's why I'm still hoping...
i dont think there's an avaiable widcomm stack for PPC devices that support HID(for now)
Same tale here, I can't the DeNuovo to talk to the Xda II at all, not even ASync. Anyone managed to get AS to work?
HID Profile
Hi,
What do you need to develop a HID profile "driver" for Pocket PC?
Can anyone give me pointers to SDKs, DOCs, ... ?
Bye,
PHPat
:shock: I have the dinovo desktop for a long time. Even with old XDA2 rom I was sync through bluetooth beautifully without any problem.
You need to install the Tobais bluetooth tool first. with the new updated rom, I can also sync it with the add on bluetooth tool.
But then I had serious problem with latest bluetooth tool, so I uninstalled it, but I can still active sync with my pc through the dinovo Bluetooth.
Did you follow the instruction from o2 site? I followed that and it works flowlessly.
When you pair with pc successfully, you should see the activesync from ppc have the tab "connect to MYCP via bluetooth"
If not, u've done something wrong :?
Since my HD f__ked up completely, I cannot really tell you the exact step. But i remembering enable two com ports in the setting. Logitech only have one com enabled.

Toshiba bluetooth stack ROCKS...

I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
cseilern said:
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
Click to expand...
Click to collapse
So, what "ROCKS" about it?
Always do full backup b4 installing sware.
it does what the MS BT stack does (serial port, headset, activesync), but also adds other profiles (pan, dun, obex, ftp, chat + others from memory)
i.e send files/chat with other mobile phone users, access bt pan, etc... though i am only interested in pan, chat and obex
when i fisrt played with it, i immediately saw why everyone whinges with the bt stack...
it's excellent and stable for me, didn't expierence any bugs...
dutty:
Did you get pan working ?
If so can you please let me know how?
Thanks,
Martin
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
uh, just started the service, restarted the device and connected to it!
BUT, i also installed the toshiba BT stack on my workstation
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
And just more thing ... How did u manage to get that bluetooth stack to run on xda devices since it keeps checking for external SD bluetooth cards and was not designed for internal bluetooth chips ?
Look in this thread:
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
Thanks for the link ....... BUT !!
I was able to download the Toshiba BT Stack v5.01 but it won't seem to work on my xda !! Everytime I tap on Bluetooth Setting (from toshiba) It says the following ' An error occurred with the Bluetooth Card. Confirm that the card is working properly.
Both my MS Stack and Widcomm Stacks are disabled and don't conflict with this new Toshiba Stack.
I was wondering how the thread owner got this BT stack running on his xda ?
It works on my XDA Mini just fine. The only problem I'm having is that it won't stay resident when you power off the device.
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
As for disabling the MS stack, look here.
Got another Question ??
Will this new stack work on a Qtek2020 ? I've tried installing it on my Qtek2020 but it won't recognise my bluetooth hardware !!
Any sugestions ??? :?:
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
Oops, sorry, look here for info about turning off the MS BT stack.
RE
From the download link provided it showed support for WM2003. How about WM2003SE?
Anyone feedback in using on WM2003SE?
Thanks
:roll:
i think the imate jam runs se?
:roll:
RE
Sorry, another question.
In the event of a hard reset will my O2 XDA II restore the MS stack with whatever registry settings that were deleted in the process of installating the Toshiba bt stack? Will the Toshiba bt stack be totally removed in the evnet of a hard reset?
Thanks again
yes sir
Found 2 problems.
Cannot connect when call ring.. connect then call is fine.
Cannot Accept call with button on headset.
Any more Problems ???
Please post your problems ..
Hi
i´ve tested the toshiba bt software on my MDA-Compact but haven´t got very good results. First, after installation, it seems to work good with my Royaltek RBT 3000 (GPS), but after i´ve switched off the device while an active bt connection was established with my gps software, the bt-stack broks down and the whole systems seems to be unstable. Even after a softreset the bt-software from toshiba says that they didnt recognize any bt hardware.
Now i am trying to deinstall the bt-soft and can recommend everybody who wants to test to make an backup before ;-)
I think that the software from toshiba could work, when the ms-bt-stack would be completly changed with the toshiba-stack, but doesnt work without problems when both bt-stacks are on the system.
Regards
FluBeX

Logitech DiNovo BT Keyboard Works on Qtek 9100

I just tried to pair my Qtek 9100 with my Logitech DiNovo BT Keyboard with no hope of success, but...
I guess you shold never say never it actually worked, not only the pairing I mean the keybord actually works on the 9100! Cool.
My only setback is that I have a Swedish keyboard and the keyboard layout does not seem to match all the way.
My 9100 has Swedish OS with support for å ä ö characters but the corresponding keys on the DiNovo writes in the same order: ] ' `
It's always something though!
CZR
How?
I've been trying for a week to get my Cingular 8125 (Wizard) to sync with my DiNovo BT keyboard...how were you able to accomplish this truly astounding feat?! I've already downloaded the latest Widcomm drivers. If the Wizard initiates the pairing then the activesync service is not listed (only get serial port and headset services). If the PC initiates the pairing then I can get the activesync service as the only service for the connection, but then when I try to use activesync over bluetooth I get an error that the port could not be opened on the computer (assume this means PC, not handheld). Please post detailed steps!!! Thanks in advance
dinovo EDGE?
Hey - was it the Dinovo EDGE keyboard (the one with builtin trackpad) that you got working? if so, did the mouse work to?
Thanks :>

bluetooth keyboard question

I'm planning to get a bluetooth keyboard for my Kaiser.. will any of the bluetooth keyboards work? or would I have to get one that is specifically for PDAs..
Sorry for such a bump, but I didn't think this required a new thread.
I am also wondering if it is possible to use a Bluetooth keyboard with the Kaiser.
anonova said:
Sorry for such a bump, but I didn't think this required a new thread.
I am also wondering if it is possible to use a Bluetooth keyboard with the Kaiser.
Click to expand...
Click to collapse
A friend of mine works for a UK company who are trying these out:
http://www.just-mobileonline.com/products_communicationseries_2.html
She sent me one recently and it seems to work OK with my MDA Vario III
I've been using the Freedom Input Universal keyboard with my Tytn II. It supports the BT HID profile, so no drivers are needed.
My ThinkOutside (now iGO) BT keyboard works perfectly with my Tilt.
http://www.igo.com/product.asp?sku=2524884
Anyone used the BT laser virtual keyboards?
http://www.thinkgeek.com/computing/input/8193/
http://www.youtube.com/watch?v=HzDrUU5n_fQ
It even made it on CSI...

Replace BT Stack

Hi there,
is it possible to install an alternative BT stack on the TP2? I can't pair with a BT mouse and keyboard and want to try if replacing BT stack might solve this?
I guess grabbing another stack from another model might brick my phone or isn't that so risky
Tnx.. Marco
I replaced the bt stack on my Hermes once.
It did work but it kinda wrecked my wm 6.1 install, causing horrible performance.
I guess (esp at this moment) your best bet is to get the current bt stack to work with your devices.
I personally love the new BT stack, the default microsoft stack doesn't seem to support anything and is incredibly slow.
Stoway BT drivers can be downloaded here it probably doesnt have direct support for the Rhodium, but if you check which other devices used a Widcomm Stack, then it should work.
Cheers,
Beasty

Categories

Resources